Doğrulanmış bayi
Ayrıntıları görüntüle
Robak Line for bottling oil / olive şişe dolum tesisleri
ikinci elDoğrulanmış satıcı
1 / 4
Teknik veriler
· ID 170389291İkinci el makineler
- Fiyat
- Pazarlığa açık
- Durum
- ikinci el
- Üretim yılı
- 2018
- Konum
- Polonya
Identifikation
ÜreticiRobak
ModelLine for bottling oil / olive
Technik
Adet1
Açıklama
Used bottling line for packaging oil / olive oil made by Robak. New 2018.
The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup.
It has primarily operated with 500 ml bottles, resulting in a production rate of:
1,000–1,200 bottles per hour.
Total number of bottles produced: approximately 486,000.
The line began operation in 2020.
The line consists of the following components:
1. ANM-08 automatic bottle filler
- 10 filling heads with Coriolis mass flow meters
- Capacity: up to 1,500 bottles/hour
2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder
- Capping machine equipped with a head for 31.5x24 aluminum caps
- Capping machine capacity: up to 2,500 bottles/hour
- Cap feeder capacity: up to 30,000 caps/hour
3. LEB-2000-2 Automatic Labeling Machine
- For both round and square bottles
- Capable of simultaneously applying front and back labels
4. System of horizontal/slat conveyors made of stainless steel
- Conveyor belt at the beginning of the line for bottle loading,
- Sheet metal guards mounted from above on the conveyor belt in the section between the filler and the capper,
- A discharge table is located at the end of the line / behind the capper.
5. Included for free:
- ZenJet 8001 high-resolution inkjet printer
- Additional print head for the sealing machine
- Replacement parts for this line
The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup.
It has primarily operated with 500 ml bottles, resulting in a production rate of:
1,000–1,200 bottles per hour.
Total number of bottles produced: approximately 486,000.
The line began operation in 2020.
The line consists of the following components:
1. ANM-08 automatic bottle filler
- 10 filling heads with Coriolis mass flow meters
- Capacity: up to 1,500 bottles/hour
2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder
- Capping machine equipped with a head for 31.5x24 aluminum caps
- Capping machine capacity: up to 2,500 bottles/hour
- Cap feeder capacity: up to 30,000 caps/hour
3. LEB-2000-2 Automatic Labeling Machine
- For both round and square bottles
- Capable of simultaneously applying front and back labels
4. System of horizontal/slat conveyors made of stainless steel
- Conveyor belt at the beginning of the line for bottle loading,
- Sheet metal guards mounted from above on the conveyor belt in the section between the filler and the capper,
- A discharge table is located at the end of the line / behind the capper.
5. Included for free:
- ZenJet 8001 high-resolution inkjet printer
- Additional print head for the sealing machine
- Replacement parts for this line
Bu makine hakkında bilgi isteyin
Talebiniz doğrudan bu makinenin satıcısına iletilir.
