presler kullanılmış satılık (1,821)

Üretici: AIDA Tip: NC2-160 İtme: 160t İnşaat yılı: yaklaşık 1991 Vuruş uzunluğu: 130 mm Tablo üzerindeki mesafe: (ayarlanabilir) 235–335 mm Tablo: 2030 x 600 mm Piston Ölçüsü: 1500x600mm Elektrik gücü: 3x200V(), 15kW - Japon standardı Net ağırlık: 19000 kg Boyut: 2140 x 2210 x 3175 mm Fobmeu D Ad Ejrcu Idepb Otomatik yağlama sistemi. Otomatik Kesme Yağı Dozajı – RAZIOL EST-02 Isteğe bağlı olarak disk sarıcı ve düzleştirici ile.

Key data: 3 t, 150 mm

Yeni durumda satılık HYUNDAE CETTA HHP-3 hidrolik pres inçdaha fazla parçainç üretici firma: HYUNDAE inçKoreainch Türü: HHP-3 Üretim Yılı: 2018 Yük aralığı: 1-3 ton İnme [mm] 150 açık yükseklik: 250 mm -Güvenlik Işık Kapısı -iki elle kullanım .-Mobil Çalışma Masası Hyundae pres kontrolü Pres çubuğu kapanma hızı: 178mm / sn Pres çubuğu presleme hızı: 54mm / sn Açılma hızı 79 mm/s Tablo boyutu: 450x360mm Çalışma basıncı: 60kg ·f / ㎠ Hidrolik motor 1,5 kW 3 faz/4P 200v Ağırlık: 350kg Makine yüksekliği inçMasa İnç: 1415mm Makine uzunluğu: 950mm Makine genişliği: CA 700mm Çalışma Masası tekerlekler veya seviye cıvataları ile

Key data: 5 t, 150 mm

Hidrolik Pres Atsugi AP-5-KL Kullanılan Yük Aralığı: 20-50 (kN) İnme (mm): 150 Düşük Hız (Yaklaşma Hızlı Hızı: 350 (mm/s) Düşük Hız (Basınç Altında Yavaş Hız: 36 mm/sn Yükselme Hızı 250 (mm/s) Çalışma Alan Açık Yükseklik: 250mm Açık Derinlik: 180mm Tablo boyutu: 450x50mm Motor Özellikleri 3 Fazlı AC200V 4P 1.5KW İki elle kullanım . Mobil Çalışma Masası Fuel Oil / Miktar Daphni Hidrolik 46/9L Toplam Ağırlık (kg) 270 Vücut Ölçüsü Yükseklik (mm) 986 Genişlik (mm) 485 Derinlik (mm) 920

AIDA NC2-250 (1) 250t eksantrik pres mükemmel durumda / ctA2 / Üretici firma: AIDA Türü: NC2-250 (1) İtme kuvveti: 160t Üretim yılı: yaklaşık 1991 Strok uzunluğu: 170mm Masanın üstündeki mesafe: (ayarlanabilir) 280-400mm Tablo boyutu: 2700x760mm Ayı boyutu: 2100x700mm Elektrik gücü: 3x200V(), 30kW - Japon standardı Pgsc NDD Hou Dxb Tjxop Net ağırlık: 35000kg Boyut: 2760x2800x3980mm Otomatik yağlama sistemi. Otomatik kesme yağı dozajlama - RAZIOL EST-02 Opsiyonel olarak disk sarıcı ve düzleştirici ile.

Key data: 300 t, 800 mm, 500 mm

HURSAN 300 ton hidrolik pres Üretim yılı 2021 Tablo 800x800 mm Strok 500 mm Güç altında kontrol etmek mümkün

Key data: 300 t, 600 mm, 400 mm

OZKOC 300 ton hidrolik pres monoblok şasi 2025'te yeni, neredeyse yeni Tablo: 600x600 mm Strok 400 mm Güç altında kontrol etmek mümkün

Key data: 400 t, 1000 mm

LAUFFER PRESLER hidrolik pres modeli VA 400 Kapasite 400 ton Tablo 700x1000 mm Güç altında kontrol etmek mümkün

Key data: 600 t, 800 mm, 650 mm

LCM Tayvan, 600 ton hidrolik pres 12/2014'te yeni Tablo 800x800 mm Strok 0-650 mm ayarlanabilir Tam teknik özellikler eklenmiş Güç altında kontrol etmek mümkün

Key data: 250 t, 800 mm, 650 mm

LCM Tayvan, 250 ton hidrolik pres Güç altında kontrol etmek mümkün 2014'te yeni Tablo 800x800 mm Strok 0-650 ayarlanabilir

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: hydraulic   quick die change system: yes   feedstock transport direction: right to left SLIDE  total force (nominal): 400 to  stroke: 200 mmCOUNTER RAM  nominal force: 100 to  stroke: 30 mmV-RING  nominal force: 200 to  stroke: 30 mmTOOL DIMENSIONS  lower table (left-right): 650 mm  lower table (front-back): 650 mm  shut height max.: 420 mm  passline opening (free passage in side columns): 420 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 12 mm  feed velocity max.: 30 m/min  feedstock transport direction: right to left LEVELLER UNIT  sheet width max.: 500 mm  sheet width (min): 60 mm  sheet thickness max.: 12 mm  sheet thickness min.: 1 mm  integrated feed function: yes STRIP-FEEDER  sheet width max.: 400 mm  sheet thickness max.: 30 mmCROP SHEAR ...

Basınç: 16 ton Masa boyutları: 800 mm x 410 mm Çekiç boyutları: 350 mm Maksimum strok: 90 mm Motor gücü: 0.9 kW Ağırlık: yaklaşık 500 kg Makine boyutları: 800 mm x 900 mm x 1400 mm Çok hızlı ve güçlü Güvenli kullanım için iki elle çalışma Basit ve sezgisel işlem Makine mükemmel çalışıyor

The DORST DK 15 Sizing and Powder Compaction Press is a used but reliable machine designed for efficient powder compaction tasks. It boasts a maximum pressing force of 150 Kn and a withdrawal force of up to 50 Kn, ensuring robust performance for various industrial applications. The press is capable of handling a maximum filling height of 40 mm and a pressing travel of up to 30 mm, while its upper punch stroke is 60 mm. This model operates with a range of 10 to 70 strokes per minute, allowing for adaptable production speeds. The machine features a die return force of 10 Kn and a supporting force in the pressing position of up to 40 Kn. Its upper punch can be adjusted within a travel limit of 15 mm, providing flexibility in operations. For pneumatic operations, the upper punch preload is up to 10 mm, and the machine consumes approximately 60 liters of compressed air per minute. The DORST D ...

The used DORST DK 100 is a robust sizing and powder compaction press designed for high-performance industrial applications. Capable of a maximum pressing force of 1000 Kn and a withdrawal force of 500 Kn, this machine provides powerful and reliable operation. It accommodates a filling height of up to 110 mm with a pressing travel of 50 mm, ensuring versatility for various compaction tasks. The upper punch stroke is 140 mm, with adjustable travel up to 75 mm, allowing for precise control over pressing operations. This model offers between 5 and 22 strokes per minute, giving you flexibility in production rates. The die return force is 100 Kn, while the supporting force in the pressing position reaches 300 Kn. Pneumatic operations are supported with an upper punch preload of up to 30 mm and compressed air consumption of approximately 80 liters per minute. It requires a total connected load  ...

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

Kod: 0455 Marka: VALENTINI - İTALYA Model: C 2 P Çekmeceler, mobilyalar, çerçeveler, dolap kapıları ve çeşitli cihazlar için pnömatik kelepçeli masa Teknik veriler: Çalışma Yüzeyi boyutları 2500 x 1300 mm Zeminden çalışma yüzeyi yüksekliği 720 mm Ayarlanabilir stroklu N° 8 itme silindirleri 9 numaralı destek çitleri Silindir itiş gücü 586–790 kg N° 2 kontrol paneli Çalışma basıncı 6/8 atm Genel boyutlar mm 2600 x 1300 x 900 h Kilo kg 1100

Masa boyutları (x-y/mm) 800 x 800 Stroke (mm) 170 Dakikada vuruş 32 Sürgüdeki ejektörün gücü (ton) 10 Sürgüdeki ejektörün stroku (mm) 100

The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...

Masa boyutları (x-y/mm) 2150 x 1200 Kaydırım Boyutları X-Y (mm) 2000 x 1200 Strok (mm) 300 Sürgü Ayarı (mm) 200 Dakikada vuruş 5 - 50 Yan pencere boyutları (x-y/mm) 800

Key data: 242 t

Bu, 242 ton x 12ft boyutunda ve derin 16" boğaz derinliği, 5 eksenli makine, otomatik taçlama ile 2 bolster ve güzel bir 4 yönlü makine ile 16" derinlik. Bu makineyle segment akut delikler ve kalıplar da mevcuttur. Temiz ve tam işlevsel. Makine 208 3 fazlı kablolu.

The Dorst TPA 350 is a robust used powder compaction press, offering a maximum pressing force of 3500 kN. It is designed to handle demanding applications with efficiency, providing a maximum withdrawal force of 2500 kN and supporting force in pressing position up to 2000 kN. The die return force reaches a maximum of 80 kN. It features an upper punch stroke of 220 mm, with an adjusting travel of 200 mm, ensuring precision in operations. This press operates at a rate of 5-18 strokes per minute, catering to various production speeds. It accommodates a maximum filling height of 180 mm and allows a pressing travel and withdrawal travel both up to 90 mm. The top pressing travel is capped at 18 mm, with an upper punch pneumatic preload maximum of 60 mm, demonstrating versatility in its functioning. It operates with a compressed air supply consuming approximately 140 l/min, backed by a total con ...

The Dorst TPA 70 is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 190 ...

2001 yılında üretilen hidrolik pres. Bu AMADA'nın SCHIAVI HFB 220-40 modeli, sağlam 4000 x 220 ton kapasiteye sahip olup, yan ve arka korumalar ile yönetmeliklere uygun fotohücreler gibi gelişmiş güvenlik özellikleri içermektedir. Kullanım ve bakım kılavuzu sağlandığından, bu yenilenmiş makine CE uyumludur. AMADA'nın SCHIAVI HFB 220-40 hidrolik presini satın alma fırsatını değerlendirin. Daha fazla bilgi için bizimle iletişime geçin.

Bu MILLUTENSIL MIL163 hidrolik presi 2003 yılında üretilmiştir. Çeşitli presleme uygulamaları için ideal olan bu cihaz, sağlam performans ve güvenilirlik sunar. Bu MILLUTENSIL MIL163 hidrolik presini satın alma fırsatını değerlendirin. Daha fazla bilgi için bizimle iletişime geçin.

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 4 is a used mechanical powder compaction press well-regarded for its sturdy performance in various industrial settings. It features a maximum pressing force of 40 kN and a withdrawal force of 30 kN, making it versatile for different compaction tasks. With a maximum filling height of 70 mm and a pressing travel of 30 mm, this machine efficiently handles varied operational demands. The upper punch has a stroke of 95 mm with an adjustable travel of 50 mm, enabling precise control during processes. The press operates within a speed range of 7 to 32 strokes per minute, consuming around 70 liters of compressed air per minute and requiring a total connected load of approximately 3.5 kW. It is designed with dimensions of 2220 mm in width, 1060 mm in depth, and 2250 mm in height, while weighing about 1,200 kg. The gear oil capacity is 12 liters, ensuring durability and the ability t ...

TAURUS kesme balya makinesi Yıl 2006 1700 ton kesme kuvveti Çalışma saatleri yaklaşık 3.500 Yan sıkıştırma kuvveti 2x250 boyuna sıkıştırma kuvveti 150 ton. Makine çok iyi durumda Her zaman düzenli olarak servis ve servis yapılır 805 kw kapasiteli 3000 litrelik depolu Perin jeneratörü ile birlikte satılmaktadır

The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...

The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...

The Dorst DK 250 is a robust used sizing and powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore i ...