taşlama makineleri kullanılmış satılık (2,497)

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-50066-2

This 125 mm orbital sander is designed for sanding wood, plaster, metal and other materials. Its lightweight design allows for one-handed operation. Auction-ID: A7-50066-246

grinding length: 5200 mmgrinding width: 1000 mmworkpiece height: 320 mmControl: Siemens 840D Passage width: 1300 mmgrinding height: 320 mmgrinding motor: 306 kWgrinding motor turning speeds up to: 320 U/mingrinding motor feed, infinitely variable: 0,5-35 m/mingrinding motor adjustment in steps: 0,002-1 mmgrinding motor adjustment, continuously stepless: bis/upto 5 mm/mindimensions of the machine ca.: 11,21 x 3,2 x 3,85 mCNC production surface grinding machine with segment headEquipment / Accessories:- with segment head, diameter 1400 mm segment head dimensions: 120/106 x 41 x 250 mm number of segments: 1 set = 26 pieces- with electro-magnetic table 5200 x 1300 mm- Marposs measuring control travel (Z1 axis), vertical: 420 mm- coolant flow rate 2000 l/min lifting station 2x pump for 1000 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 125 liter: 1.000 mmtank diameter / tank height: 920 / 480 mm: 210 mmvoltage: 380 Vweight of the machine ca.: 630 kgdimensions of the machine ca.: 1,10 x 1,50 x 1,30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wheel diameter: 300 mmgrinding wheel width: 50 mmno. of working stations: 2 Stückturning speed range - stepless: 1.450 / 2.900 U/minvoltage: 400 Vtotal power requirement: 1,6 / 22 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 1,10 x 0,50 x 1,30 m! ATTENTION ! EXCELLENT CONDITION !This machine comes from a vocational school!- Serial No.: 090520004The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 525 mmtable surface area: 960 x 400 mmdimensions of grinding wheel: 350 mmtable height over floor: mm: 600 x 400 mmgrinding spindle speed: 3000 U/mintable load capacity: 1100 kptotal power requirement: 8,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,4 x 1,9 x 2,1 mSurface grinding machine- Magnetic chuck- Coolant system with filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: - mmgrinding width: 600 x 2000 mmworkpiece height: - mmControl: - table surface area: ca. 600 x 2400 mmx-travel: 2100 mmy-travel: 550 mmz-travel: 560 mmmax. dia. of grinding wheel: 400 mmtotal power requirement: kWweight of the machine ca.: ca 7,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 175 mmgrinding length: mmworkpiece length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 €: 1 : 100 x 2.000 mm: 20 - 76,1 mm: 1 : 3 kW: 190 kgDEMO MACHINE / MINT CONDITIONThe lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table.Incl. 5 pcs. grinding belts, 1 pce. gr ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 €: 122.59 €: 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...

grinding length: 300 mmgrinding width: 500 mmworkpiece height: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 750 mmgrinding length: 5400 mmcentre height: 375 mmmax. workpiece diameter: 750 mmworkpiece weight: 10000 kgtable - swivable +/-: - °grinding wheel size: 750/650 x 75 x 305 mmgrinding wheel turining speeds: 750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 15 kWworkpiece drive: 7,5 kWfeeds - fine adjustment: 0,00635 - 0,0508 mm/mintotal power requirement: - kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,4 mRefurbished 2023 and equipped with:- DRO- Table swivable- 9 x steadies- Coolant/Filtration TankMachine has had over 85000,-€ of retrofit work in 2023 including:-- replacement of air bearing liners-- 7 x steadies fully overhauled-- Overhaul of top table & centre heights of workhead & tailstock-- New electrical wiring & cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 €: 1267.62 €: 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted ...

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 €: 1660.74 €: 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working area1 grinding wheel2 grindi ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 €: 1581.36 €: 810 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 450 mm: 0 - 675 mm/min: 480 mm: 500 - 2200 1/min: 3,75 (optional 5,5 / 7,5) kW: 1.5 kW: 3250 mm: 3075 mm: 2250 mm: 2900 kg: 175 kg: 350 kg: 355 x 50 x 127 mm: 1,1 kWFully enclosed splash guard10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listautomatic vertical feedservo drive for grinding wheel feed and table cross feedheavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearingshardened and gr ...

grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmgrinding wheel diameter: 500 x203,2 x 50-100 mmtotal power requirement: 12 KvAweight of the machine ca.: 4,7 tdimensions of the machine ca.: 3,3 x2,0 x 1,8 m- Includes belt filters - Includes grinding wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 715 mmgrinding length: 2000 mmcentre height: 360 mmcontrol: Siemens 840 D centre distance: 2000 mmmax. workpiece weight between centers: 650 kgGrinding spindle:: Spindlespeed: 450 min/-1driving power - grinding spindle: 7,5 kWtaper: 1:5 tool taper: mmfeed speeds: 0,01 - 15.000 mm/mintravel -x axis: 500 mmtravel -z axis: 2700 mm: 280 °grinding speed: 15 m/mintotal power requirement: 75 kWweight of the machine ca.: 14,5 tdimensions of the machine ca.: 5 x 2,4 mExternal cylindrical grinding machinemodernised in 2022-- Siemens 840D / electrical system-- Ball screws on the X and Z axes replaced-- B axis repaired and encoder replaced.-- Hydrostatic system replaced.Equipped with:- Siemens 840D PowerLine CNC control (X, Z, C, B axes)- Marposs measuring system- BalaDyne system- Tailstock- Band filter systemThe data for this ad was created with ModulMWS - the software solutio ...

grinding length: 600 mmgrinding width: 300 mmworkpiece height: 312 mmtable-size: 600 x 300 mmmax. workpiece weight: 320 kgdist. center of grinding spindle - table: 490 mmtable travel longitudinal: 700 mmtable travel cross: 340 mmtable feed: 1 - 25 m/minturning speed range - grinding wheel: 1500 U/minpower capacity - grinding motor: 2,2 kWgrinding wheel size: 355 x 25 x 127 mmmagnetic clamping plate: 610 x 305 mmdressing device: Kopfabrichter voltage: 400 Vtotal power requirement: 3,0 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,90 x 1,90 x 1,90 mhydraulic power unit: 0,60 x 0,35 x 0,75 mcoolant: 0,70 x 0,40 x 0,80 m- Serial-No.: EB 1507- automatic vertical feed- dressing device- Band filter unit- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece height: max. 940 mmtotal power requirement: 6 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 1,0 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 50 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050068 : prompt, Zwischenverkauf v : Taiwan : 40360 €: 770.88 €: 1 : 457 mm: 450 mm: 457 x 203 mm: 450 x 200 mm: 215 kg: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: 0,002 - 0,04 mm/min: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 0.19 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmcontrol panel on swiveling armaut. vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50290 €: 950.48 €: 610 mm: 600 mm: 610 x 305 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 1.100 mm/min: 1 - 12 mm: 370 mm: 1.5 kW: 0.004 kW: 0.19 kW: 7,4 kW: 2670 mm: 1810 mm: 2050 mm: 2100 kg: 355 x 50 x 127 mm: 1.450 U/min: 3,7 kW: 4 mm: 0,02 mm: 0,2 mm: 0,002 mmcontrol panel on swiveling armaut. vertical feedhardened slide ways in all 3 axes with needle rollersgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatormanual extractor with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 €: 216.96 €: 5 kW: 265 kg: 10-114 mm: 2 : 3-22 m/s: (2x) 50 x 940 mmto grind and polishfor round and oval tubesopening of sanding belts by footpedalmachine and equipment accordingto the CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 €: 1 : 1580 €: 2.000 x 50 mm: 250 x 50 mm: 400 - 2800 1/min: 35 mm: 2.2 kW: 1160 mm: 700 mm: 1850 mm: 150 kgbelt grinding- and polishing machine in one devicecontinuous variable revs by frequency converter2 clamping mandrelsquick action clamping chuckincl. underframeusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : 162560 €: 3072.38 €: 1200 mm: 730 mm: 1200 x 600 mm: 1200 x 600 mm: 1300 mm: 5 - 30 m/min: 0-2250 mm/min: 0,001-32 mm: 685 mm: 560 mm: 0-675 mm/min: 500-2200 1/min: 11 kW: 5.5 kW: 3.1 kW: 3.1 kW: 4790 mm: 3207 mm: 2305 mm: 8100 kg: 1150 kg: 1600 kg: 405 x 75 x 127 mm: 0,0001 mmiSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system10.4” TFT high resolution color control to ensure ease of operationRough increment, finish increment, spark out (0-9 times), and automatic grinding cycleCycle interrupt, flip over for part inspection &, final dimensions setWheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completedDisplay accuracy 0.0001mmI/O diagnosis &, alarm displayMax. table speed (X axis) 30 m/minIntegrated machine-body temperature controlDoub ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 €: 2266.49 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 0 - 20 m/min: 0 - 3000 mm/min: 0,001 mm: 350 mm: 440 mm: 0 - 3000 mm/min: 0.001 mm: 500 - 1800 1/min: 11 kW: 3160 mm: 2450 mm: 2080 mm: 3400 x 2200 x 2530 mm: 4000 kg: 975 mm: 195 kg: 370 kg: 355 x 50 x 127 mm: 1,1 / 1,1 kW: 3.9 kW: 0,005 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, class 7)Longitudinal and cross guides with heavy duty needle roller bearing for lo ...