presler kullanılmış satılık (1,825)

pressure: 230 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcolumn arm: 420 mmoil volume: 400 lControl: ModEva 10S weight of the machine ca.: 19700 kgdimensions: 5100 x 2160 x 3420 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to: 400 mm: 850x630 mm: 850x640 mm: 685 mm: 250 mm/s: 10-20 mm/s: 11 kW: 2030 mm: 1150 mm: 3565 mm: 7700 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC DNC 86 PS total power requirement: 18,5 kWweight of the machine ca.: 18.000 kgdimensions of the machine ca.: 5180x2400x3200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 tchamfer lenght: 3060 mmdistance between columns: 2690 mmStroke: 365 mmControl: DELEM DA 65 throat: 410 mmdayligth: 535 mmdimensions: 3660 x 2310 x 3100 mmmachine weight ab.: 17.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 300 mmstroke of ram: 240 mmquantity of oil: 200 lcontrol: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mmEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 20800 €: 399.36 €: 70 to: horizontal verschiebbar : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 1050 kgHORIZONTAL MOVABLE CYLINDER550 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram capacity: 2000 treturn capacity: 150 ttable-size: 1015 x 1050 mmram head dimension: 975 x 1050 mmdist. between pillars (left to right): 975 mmdayligth: 1000 mmdistance table/ram: 600 - 1000 mmram stroke: 400 mmtable height over floor: 800 mmheight over floor: 3650 mmTable ejector: 63 KNRam ejector: 650 KNTable ejector stroke: 100 mmRam ejector stroke: 100 mmLenght of ram slide guiding: 1400 mm: Idle speed downward: 235 mm/sworking feed: max. 20 mm/secWorking speed at 10000 KN: 14 mm/sWorking speed at 20000 KN: 5 mm/sIdle speed upward: 250 mm/sovertravel time: 220 mssafety distance: 352 mmtotal power requirement: 194 kWweight of the machine ca.: 105 tdimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 mTechnical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!The  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 €: 397.44 €: 150 to: fix : 1000 mm: 300 mm: 1020 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 8 mm: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2450 mm: 2400 kg2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every positionmanuel and 2 hand workingTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 4000 kNtable length: 2500 mmtable width: 2000 mmdayligth: 2500 mmstroke: 2600 mmtank capacity: 1000 ltotal power requirement: 56 kVAweight of the machine ca.: 85 tdimensions of the machine ca.: 9,2 x 3,1 x 8,2 mintegrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 €: 1413.72 €: 40 to: 2050 mm: Y1 / Y2 / X und R Achse : 200 mm: 1700 mm: 350 mm: 440 mm: servomotorischer Spindela : 180 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 2600 mm: 1450 mm: 2650 mm: 4400 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 524 mmrange L-W-H: 4200x2200x3700 mmweight of the machine ca.: 17.000 kgEquipment:- Control conversion 2023 to CYBELEC VisiTouch Pac- controlled axes: Y1, Y2, X, R, crowning- Hydraulic punch clamping- Hydraulic die clamping- 4-stage pneumatic die displacementThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmcylinder diameter: 170 mmwork height max.: 900 mmFront light range: 1330 mmLateral light range: 450 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2600 kgdimensions of the machine ca.: 2500x1100x2800 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3200 mmControl: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmStandard equipment:- Cybelec CybTouch 15 Windows CNC control- 4 + 1 axes: Y1, Y2, X, R, C- Mechanical crowning system: B-CM- Backgauge system, model GHP-2- Servo-driven main motor- Safety system: DSP AP+MCSOptional equipment:- 2 x front support tables- 2 x stop fingers- Wila Style hydraulic upper die clamping- Wila Style hydraulic die clamping- CE Standard complianceYouTube video links:https://www.youtube.com/watch?v=u3sBJxJ3M8ghttps://www.youtube.c om/watch?v=MmZtAJArHA0https://www.youtube.com/watch?v=mybVan1S2pkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 350x210 mm Slide stroke 80 mm Shots per minute 10-50 Max mould height 300 mm Worktop size 750x445 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 350, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. They are ...

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 33900 €: 1 : 30 to: 1050 mm: 3 (Y1, Y2, X) : 160 mm: 850 mm: 250 mm: 390 mm: hydraulisch : 10 mm/s: 130 mm/s: 495 mm: 250 mm/s: 835 mm: 104 mm: 75 l: 7.5 kW: 2470 mm: 1250 mm: 2245 mm: 3250 kgdemo machine / mint conditionnet price (price for new machine € 41.200,00)Y1, Y2, X - 3 AxisControl Unit - DT 10 Touch screen 2D graphic (Remote Control)Back gauge: motorized &, linear guide &, ballscrewEuropean clamping systemEuropean clamping system top toolEuropean style bottom tool holderSupport arms with T-SlotSafety side covers (Non CE)World known electrical equipmentsOPTION:DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) €2.110,-BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detaile ...

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 400 mm: 1100 mm: 350 mmfeed down: 6,2 mm/secfeed up: 9,8 mm/sectotal power requirement: 6 kWweight of the machine ca.: 1.300 kgdimensions of the machine ca.: 1640x1000x2550 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmdistance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.