presler kullanılmış satılık (1,697)

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 €: 718.16 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5,5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With charging station and 1x 18V Li-ion battery. Auction-ID: A1-47154-703

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 €: 982.8 €: 150 to: fix : 1250 mm: 500 mm: 700 mm: 1500 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1200x700 mm: 1250x400 mm: 2400 mm: 1200 mm: 2800 mm: 5200 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...

Horizontal press; NC-controlled Auction-ID: A1-40976-85

: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic workshop press / industrial press – Steinebronn Industrietechnik – 250 t – year of construction 2000 Used hydraulic industrial press / workshop press from Steinebronn Industrietechnik in stable and functional design. The press is ideal for pressing, straightening, forming and assembly work in industrial use. Technical data: • Manufacturer: Steinebronn Industrietechnik • Year of manufacture: 2000 • Press force: 250 t • Lifting height: 250 mm • Passage height: 800 mm • Control: Siemens S7 • Hydraulic power unit: HAWE Hydraulik type BZ 4.0 • Connection voltage: 400 V / 3-phase • Machine weight: approx. 5 t Dimensions press: • Width: approx. 130 cm without control cabinet / approx. 200 cm with control cabinet • Depth: approx. 70 cm • Height: approx. 310 cm with protective grille / approx. 240 cm without protective grille Dimensions hydraulic powe ...

Auction-ID: A1-40976-112

Auction-ID: A1-40976-9

Basınç: 200 Tstroke: 500 mm Tablo:: 1000 - 800 Aşağı besleme: 150 - 280 mm/basınçta sek besleme: 10 - 26 mm/saniye besleme: 180 - 300 mm/taban üzerinden saniyelik yükseklik: 750 mm toplam güç gereksinimi: makinenin 22 kW ağırlığı ca.: makinenin 7 ölçüsü ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Auction-ID: A1-40976-30

basınç: 25 tspindle çapı: 70 mm strok: 210 mm tabla boyutu: 350 x 500 mm toplam güç gereksinimi: kW makine ağırlığı ca.: 0,9 tBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Basınç: 250 Boğaz: 360 mmTabla boyutu: 1.250 x 630 mm Tablo çapı: 250 mm RAM boyutu: 850 x 450 mmGün ışık: 800 mmpiston strok: bis 500 mm piston çapı: 400/360 mmram strok hızı: abwärts 200 mm/secram strok hızı: aufwärts 110 mm/saniye toplam güç gereksinimi: makinenin 20,5 kW ağırlığı ca.: 8 tBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

basınç: 63 tdistance sütunlar arasında: 3200 mm vuruş: 200 mm Bu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Basınç: 250 Boğaz: 360 mmTabla boyutu: 1.250 x 630 mm Tablo çapı: 250 mm RAM boyutu: 850 x 450 mmGün ışık: 800 mmpiston strok: bis 500 mm piston çapı: 400/360 mmram strok hızı: abwärts 200 mm/secram strok hızı: aufwärts 110 mm/saniye toplam güç gereksinimi: makinenin 20,5 kW ağırlığı ca.: 8 tBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Press force [ton] 100 Max. working width [mm] 3600 Column gap [mm] 3300 Throat depth [mm] 250 Backgauge depth [mm] 600 Max. stroke [mm] 120 Auction-ID: A1-40976-60

Auction-ID: A1-40976-116

Auction-ID: A1-47154-194

pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basınç: 30 Tstroke: 300 mm sütunlar arasındaki gün ışığı: 700 mmGün ışığı: 850 mm: 140 mm piston çapı: 60 mm Taban yüzey alanı: 700 x 390 mm Makinenin ağırlığı ca.: 0,35 Makinenin boyutları ca.: 1,2 x 0,8 x 2,2 mAtölye Presi- Hareketli silindir - 2 destek prizması - Acil durdurma cihazı Bu reklamın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Auction-ID: A7-47148-15

Auction-ID: A1-41277-578

Auction-ID: A1-41277-589

Auction-ID: A1-41277-2

pressure: 28.0 tchamfer lenght: 1050 mmdistance between columns: 890 mmthroat: 200 mmstroke: 200 mmdayligth: 325 mmback stop - adjustable: 500 mmworking feed: 8.0 - 10.0 mm/secreturn speed: 35.0 mm/secback stop - adjustable: 0 - 370 mmControl: CYBELEC total power requirement: 4.75 KWweight: 3250 kgrange L-W-H: 1595 x 1390 x 2020 mm Very good / well-maintained condition () new price in 2012 ... approx. 36.000 Euro special price on request The machine was in continuous use in a test areaand as a result has only very few operating hours !- in checked conditions - machinevideo - https://www.youtube.com/watch?v=2LsTlpSaEuEEquipment:- CNC electro-hydraulic press brake- CNC control CYBELEC ModEva 15PAC Large 15 touch display Workpiece creation simply by hand in 2D thanks to the TouchProfile function Intuitive and interactive programming Clearly arranged keyboard Clear and concise menu pages- CN ...

: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 €: 205.44 €: 1 : 10700 €: 50 to: horizontal verschiebbar : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 720 kg: 550 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 13500 €: 259.2 €: 70 to: fix : 350 mm: 900 mm: 1050 mm: max. 9 mm/s: 2 kW: 1900 mm: 850 mm: 2250 mm: 1030 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to: 500 mm: 5.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 5000 mm: 3000 mm: 32000 kg: horizontal verschiebbar : 2550 mm: 1.700 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.