içecek makineleri kullanılmış satılık (1,876)

Eğimli konveyörlü kutu yıkayıcı Makinenizi planlamaktan memnuniyet duyarız, ve değişim, konveyör teknolojisini destekliyor

0.5 l Braket 0.5l Euro 0.33l Uzun bacak

0.5l Braket 0.5 l Euro 0.33 l Uzun bacak

Makine çok iyi durumda ve salıncak kapaklı şişeler de sürülebilir 0.5l Braket 0.5l Euro 0.33l Uzun bacak

Heuft Inspector, 0.5l Euro 0.5l Braket 0.33l Longbacak Şişe için Makine bizim tarafımızdan planlanabilir ve şişe koşusu ayarlanabilir.

Klinger şişe yıkama makinesi de salıncak üstü şişeler için. Makine bizim tarafımızdan planlanabilir ve kurulabilir. Ayrıca ek konveyör teknolojisi de sağlayabiliriz

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...

Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler  ...

Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm

Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles

Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or ...

Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators

Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled)

Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles

Genel Bakış Dolgu 2007 yılında Alman şirketi Krones tarafından üretilmiştir. Makine düzenli olarak bakım yapılmış, hâlâ monte ediliyor ve her zaman incelenebilir. Teknik detaylar Çıkış: 40.000 bph (200 ml) Formatlar: 200 ml cam şişe 237 ml cam şişe Kapalı: Kapak kapağı Akış yönü: saat yönünde Giriş/çıkış yüksekliği: 1.150 mm +- 50 mm Dolum noktaları: 96 Kapak noktaları: 15 Pitch daire çapı: 2.880 mm Pitch: 94 mm Kontrol sistemi: Siemens S7 Enerji tüketimi: 15.17 kW

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Overview  This cold glue labelling machine was manufactured in 2005 by German company HEUFT. The machine is no longer in production use and is now available for sale. It includes two integrated laser coders for date marking and supports a wide range of bottle formats. Ideal for high-speed beverage production environments. Technical data  Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0,3l - 0,66l Steini, NRW, Longneck Container types: Glass, not transparent, non-contoured Container diameter: 60.4 – 69.1 mm Container height: 174 – 270 mm Label positions: Front (up to 2 labels) Back (up to 1 label) Label size range: Width: 70 – 111 mm Height: 33 – 100 mm Band height: 1100 mm Max. ambient temperature: 40°C Power connection: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle pla ...

Genel Bakış Bu palet etiketleyici 2023 yılında LOGOPAK tarafından üretilmiştir. Makine, paletlere kendiliğinden yapışkan etiketler uygulamak üzere tasarlanmıştır. Eylül 2025'e kadar hizmette olup, şu anda duraklı, hâlâ kurulu ve enerji bağlantısı kesilmiş. Makine hemen kullanılabilir ve talep üzerine ziyaret edilebilir. Bakım yılda iki kez yapıldı; Teknik veri Kapasite: maksimum 100 palet/saat Uygulama: Palet etiketleme (kendiliğinden yapışkan)    

Genel Bakış Bu yarı otomatik yeni cam itici cihaz 2017 yılında Alman üreticisi Alwid tarafından üretilmiştir. Makine profesyonel olarak saklanır ve her zaman şahsen görüntülenebilir. Teknik detaylar Yarı otomatik yeni cam itici ve değiştirilebilir kavrama üniteleri 4 baş: katman desenine göre ayarlanabilir ALWID BESLEME MASASI + ALWID PALETİZER

Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...

Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volu ...

Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected

Genel Bakış Bu kutu yıkayıcı 1997 yılında Alman şirketi Klann tarafından üretilmiştir. 1800 N modeli, saatte 2000 kutuya kadar kapasitede çeşitli boyutlarda içecek kutularını temizlemek için tasarlanmış tek banyo kafes yıkama sistemidir. Hâlâ kurulu ve hemen kullanılabilir. Teknik veri Kapasite: 2000 sandık/saat (GDB kutuları için, boyla) Sandık formatları: 12 × 0.7 L kutu (boyuna doğru) Banyolar: 1 Yapı: Paslanmaz çelik Toplam uzunluk: 4.640 mm Genişlik: 1.300 mm Elektrik bağlantısı: 16 kW Buhar çıkarma

Su ve şuruptan karbonatlı gazlı içecekler üretmek için iki bileşenli H-Falterbaum (Famix) premix sistemi mevcuttur. Karıştırma kapasitesi: 6000l/s, gazlandırma: vakum gazlandırma, maksimum kap basıncı: 6.5bar, makine boyutları X/Y/Z: yaklaşık 2500mm/1250mm/2500mm, ağırlık: yaklaşık 1500kg. Belgeler mevcut. Sahada inceleme yapılabilir.

Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 N ...

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V  

Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink  ...