içecek makineleri kullanılmış satılık (2,108)

Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens ...

Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...

Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data Manufacturer: KOSME Model: DEPACK B B1F A/67-Rf Year of manufacture: 2013 Machine type: depalletizer for empty containers Output: up to 13,000 c ...

Sistem, dolgu sürecinden önce hareketli hava nozulları (saf filtreler) aracılığıyla boş kapları / kapları / şişeleri otomatik olarak temizlemek için kullanılır. KOSME JET CLEAN G 16/960 1T UP, boş kapları (üst yüz) döndürür ve gevşek partikülleri ve safsızlıkları hareketli nozullar aracılığıyla filtrelenmiş hava üfleyerek çıkarır. Makine, dolgu sistemine girmeden önce gevşek birikintileri kaplardan çıkarmak için kullanılır. Kapasite: saatte 6000 şişeye kadar Boyutlar: 2500 x 2500 mm Makine ağırlığı: 1600 kg Bağlantı: 3x400 V, N, 50 Hz Hava basıncı: 6 bar Su basıncı: 3 bar

Paletten çıkarıcı, paletleri, çok katmanlı konteynerleri (örneğin üflenmiş şişeler / şişe boşlukları) bir nakliye konteynerine ayırır ve bir sonraki bağlı makineye kadar uzanır. Kapasite: 13.000 b/h Kontrol: Siemens Bağlantı: 3x400 V, N, 50 Hz Koruma sınıfı: IP 54 Elektrik gücü (elektrik.): 27 kW Akım: 49 A Durum: iyi bakımlı, tam işlevsel Kullanılabilirlik: 43. hafta 2026'dan itibaren

Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data Manufacturer: H&K (Holstein und Kappert) Model: SVF 120-D Year of manufacture: 1991 Machine type: rotary can filler Filling valves: 120 Can format: 211/202 Output: approx. 80,000 cans/h (330 ml) Power supply: 380 V, 50 Hz, 3/N Rated current: 24 A Control voltage: 24 V DC PLC: Siemens S7-400 (CPU 416-2) Scope of delivery Can filler SVF 120-D with 120 filling valves and can lift cylinders Can seamer: Angelus 121 L (202), year 1991 Can rinser operated tog ...

Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: SK 452 T Year of manufacture: 2002 Machine type: shrink packer for PET bottles with integrated heating tunnel Output: up to 30,000 bottles/hour Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1. ...

Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data Manufacturer: Twin Pack Year of manufacture: 2002 Machine type: handle applicator for beverage multipacks Line output: 20,000 - 30,000 bottles/h depending on format Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l Control: Siemens text operator panel Equipment Handle application unit with tape reels on a blue steel frame above the pack conveyor Control panel with separate start, stop and reset for the front and rear sections, emergency stop Guarded enclosure with transparent doors Condition Still installed and under power. An inspection o ...

Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Sistem, ıslak yapıştırıcı yöntemiyle iki modülle etiketler ve üçüncü ek modül aracılığıyla sıcak yapıştırıcı ile etiketleyebiliyor. Boyutlar: yaklaşık 3,80m x 3,00 m Etiketleyici, saatte 15.000 şişeye kadar üretim sağlar. Durum: çalışır, tam işlevsel Makine boyutları (LxW): 3800 x 3000 mm Çıkış: 15.000 bpm'ye kadar Düzenlemeye göre izleme

Şişeleme hattı, şunlardan oluşur: 1. Paletten çıkarıcı/Palete çıkarıcı Üretici: Pack und Palettiertechnik Rudolf Steinle Gersthofen GmbH Tip: RAPID-EK Üretim Yılı: 1993 Hava basıncı: 6 bar Bağlantı: 220/380 V, 50 Hz Kontrol: 24 V DC 2. Paketi aç Üretici: Radenska & Steinle (RS) Tip: ARO-P3 Yapım Yılı: 1995 Hava basıncı: 6 bar Bağlantı: 380 V, 50 Hz Güç: 3 kW 3. Kutu yıkayıcı Üretici: Radenska & Steinle (RS) Tip: SPN-2S Yapım Yılı: 1995 Bağlantı: 380 V, 50 Hz Güç: 8 kW 4. Şişe çamaşır makinesi Üretici: Schymanski GmbH (MAG) Tip: SIRIO 8-24 İnşaat yılı 2000 Bağlantı: 400 V, 50 Hz 5. Şişe denetçisi Üretici: miho Inspektionsysteme GmbH Tip: DAVID Yapım Yılı: 2002 Bağlantı: 230 V, 50-60 Hz 6. Şişe doldurma hattı Şişe dolgu maddesi Üretici: KHS Tip: VVF Şişe kap ...

Krones VarioFlash B, termal ürün tedavisi için son derece verimli bir flaş pastörörördür. Mikrobiyolojik olarak güvenli bira doldurulması için özel olarak geliştirilmiştir; bira, karışık bira içecekleri, şarap ve spritzer Performans aralığı: Tüm aile saatte 1.800 ila 60.000 litre arasında güç üretir. 2019'da sunulan küçük varyant, saatte 18 ila 45 hektolitre (1.800 ila 4.500 l/s) çıkış aralığı için hassas şekilde optimize edilmiştir. Kompakt tasarım: Küçük varyantın tüm KZE tesisi, tek bir konteynere sığacak şekilde boyutlandırılmıştır. Bu, sahada taşıma, kurulum ve devreye almayı çok daha kolay hale getirir. Nazik koruma: Kaydırmalı PE kontrol sistemi (Pastörizasyon Üniteleri) ve uyarlanmış sıcak su devresi ile donatılmış bira, tadını en iyi şekilde korumak için son derece nazikçe ısıtılır  ...

Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Manufacturer (line builder): Leifeld & Lemke Year of manufacture: 1990 (continuously upgraded since) Machine type: complete automatic KEG cleaning and filling line Capacity: up to 130 kegs/h at 30 L (seller-stated) Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery Empty-keg infeed with ce ...

Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Year of manufacture: 2009 Design: low-level infeed palletizer Changeover: automatic, for different pallet patterns and pallet sizes Output range: low to medium production capacities Handled at the site: shrink-wrapped PET bottle packs Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery GEA Procomac  ...

Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg

2x Tetra Pak Dolgu hattı 1x Dolum makinesi: TBA 8 Base 500B Kapasite: 6000 TP/s YOM: 1996 Çalışma saati: yaklaşık 30.000 saat 1x Packer: TCP 70 YOM: 1998 1x Dolum makinesi: TBA 8 Base 1000B Kapasite: 6000 TP/s YOM: 1996 Çalışma saati: yaklaşık 15.000 saat 1x Packer: TCP 70 YOM: 1998 1x Accmulator:Tetra Helix 21 YOM: 2002 Durum: Kullanıldı Kullanılabilirlik: bundan sonra

3x Dolum makinesi: TBA 8 Base 750B Kapasite: 6000 TP/s YOM: 1996 Çalışma saati: yaklaşık 30.000 saat 3x Packer: TCP 70 YOM: 1996 Durum: Kullanıldı Kullanılabilirlik: bundan sonra

Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...

Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles.Technical DataCapacity: 14,400 bottles/hour for 0.5 L bottlesProducts: Still and carbonated waterContainers: PET bottlesBottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L, currently running 0.5 L bottlesLabelling: PE Roll-LineCap feeding system: Gravity 26Pack formats: Packs of 12 for 0.5 L and 1.0 L bottles Packs of 24 for 0.5 L bottles Packs of 6 for 1.5 L bottlesPallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mmCondition: Used lineVideo: youtu.be/XUEY0L49VJQMachines and Equipment1. PET blow moulding machine – Sidel SBO 8, year 2006Including preform tipper, preform hopper, elevator, orienter and feed chute2. Air conveyor – Lanfranchi, year 20063. Chiller – MTA, year 20264. Filling machine – SACMI Blu Star  ...

Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data Manufacturer: Jakü Model: EGA-CARBO Year of manufacture: 2017 Machine type: deaeration and carbonation unit for water Capacity: 120 - 12,000 l/h Components: water, CO2 Electrical supply: 400 V, 50 Hz Installed power: 16 kW Rated ...

CIMEC İtalya'dan alınan dolgu blokları durulama, dolgu ve kap kaplayıcıdan oluşur. Saatte 1000 şişe çıkarır. Toplama plakasına elle yükleme ve dağıtım

Bira fabrikasında çeşitli paslanmaz çelik bağlantı parçaları sunuyoruz

Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.

Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1454, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 380/415 V - 50 Hz - 1.455 rpm - 14,6/13,4 A, Estimated capacity: ± 30 m3/h

The APV Puma 2.2.9 Centrifugal Pump is a pump used in hygienic applications. Designed for Cleaning-in-Place (CIP). Can be used in hygienic applications like dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor). Diameter of the impellor: 191 mm (7,5). Pump casing: 9. Connections on the inlet: 2. Connections on the outlet: 2. Capacity with the current motor: ± 35 m3/h at a differential pressure of ± 2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1656, Diameter of the impellor: 191 mm, Motor: ± 7,5 kW - 380 V - 50 Hz (no nametag on the motor), Current estimated capacity: ± 35 m3/h at a differential pressure of ± 2 Bar

Suitable for 0.7l-VdF bottles, capacity: 3000bottles/h, running direction: right to left, the packing head is equipped with 12 long-life packing tulips, the machine was used in low-volume operation, is very well maintained and has low operating hours, an on-site inspection is possible.

Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible.

Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.

LEIBINGER TRANSVASA 12/6 EK – monobloc counter-pressure bottle emptying / transfer machine for carbonated beverages in glass bottlesIDENTIFICATION- Manufacturer: LEIBINGER- Model: TRANSVASA 12/6 EK- Year of manufacture: 2017- Serial/order number: 472447- Previous application: ciderFUNCTION AND OUTPUT- 12 emptying valves- Counter-pressure emptying with long-tube technology- 6 decapping stations- Direction of operation: clockwise- Nominal output: 2,500 bottles/h for 0.75 l bottles- Adjustable range: 560–2,800 bottles/h- Designed for carbonated beverages, e.g. traditionally produced cider- Automatic removal and collection of pierced bottle closures- Integrated through conveyorPRODUCT AND UTILITY DATA- Maximum product temperature: 20 °C- Compressed air: 6 bar, connection R 1/2- CO? product pressure: 8 bar, gas connection R 1/2- Product outlet: DN 40- Gas discharge: DN 40- Buffer tank: 1 ...