freze makineleri ahşap çalışma kullanılmış satılık (640)

Eksen Vuruşları X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm Maksimum dönüş 24000 rpm C ekseni = 360 derece kesintisiz dönüş B ekseni = 360 derece kesintisiz dönüş 16 Pozisyonlu Tabanca Takım Değiştirici

Calpe (5) istasyonlu CNC torna tezgahı

BALLISTRIN- C 70 N- (2) taraflı şekillendirici(2) 10HP ile otomatik besleme; 3PH iş mili motorları • (2) somunun altında 5 inçlik 30mm çapında iğler • Yaylı yüzer iğler • Giriş ve çıkış beslemeli kauçuk kaplı üst besleme silindirleri • Çalışma genişliği 14,4 inç. (360mm) max • Çalışma yüksekliği 4,8 inç. (120mm) max • Minimum çalışma uzunluğu 9.6in. (240mm) • İş Mili 8.000 RPM • besleme 3-28Fiyat-$9,500

BALLISTRINE- lineer profil oluşturucu,/şekillendirici-çift taraflı Yan tarafta 10 hp kesici kafası- şablonlarınızı takip eder - her iki tarafı da şekillendirir - 9' tablo - hidrolik besleme - malzeme tutma - 9.700 $

HELMA- model CF-40 kopya frezeleme/şekillendirme makinesi iş parçası dönüşü ile besleme (2) frezeleme mili- 18 inç maksimum mil merkezleri arasındaki mesafe- 28 inç x 45 inç Masa - (2) 30mm. çalışma mili - 10.500 RPM iş mili- 4 inçmaks. kesme yüksekliği - dikey ayar 10 mm.- (2) 7 1/2 hp. iş mili motorları - 1/2hp. değişken hızlı besleme motoru dakikada 5 'ila 30' - 2.200 lbs. 7.500 $

Onsrud ikiz masa kopya şekillendirici Sürekli üretim için ONSRUD-otomatik çift tablalı döner şekillendirici, model RS-28, 2 vitesli kesici (5.000/10.000 rpm.) dönüşümlü olarak sağa veya sola döner, Orta kelepçe devreye girdiğinde, masa döner, kesici parçanıza döner ve parçayı şablon işlemeye devam eder, operatör yükler ve yükler alternatif tabladaki yeni parça, kesim tamamlandığında operatör ayağına basar pedal, kesici daha sonra alternatif masa ve kesimlere döner, döngü 9.900 $ devam eder Fred (716) 433 4224 ile iletişime geçin (12:00 öğlen aramak için en iyi zamandır)

• Dovetail machine Serial number 103502 Total installed power 2 KW Maximum workpiece width approx, 250 mm Milling template with 10 notches in each zone Distance between the notches approx, 25 mm Motor power 1,50 KW 8 milling spindles 2 pneumatic clamps • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 900 x 1200 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-157

Used chain mortiser (mortising machine) for cutting rectangular holes and mortises in wooden pieces, suitable for constructing window and door frames. Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Auction-ID: A7-50988-109

Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-245

Vertical head stroke 180 mm Head longitudinal stroke 200 mm Head cross stroke 80 mm Head rotation +/- 45° 2.20 KW Motor Tilting table +/- 45° Operating conditions of this machine: unchecked. Dimensions for transport approx. 1200 x 900 x 2250 mm. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-64

Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-282

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-272

Fully reconditioned spindle moulder with saw disc and sliding carriage (Steton, Italy). Spindle tool diameter up to 300 mm, carriage travel 110 cm, mitre fence with clamp, saw disc diameter up to 400 mm, spindle shaft 50 mm, 2 speeds on the spindle motor, 380 V supply. Technical inspection carried out by our specialised technical department. Further technical specifications are not confirmed for this specific unit - please contact us for details. Fully reconditioned Auction-ID: A7-50988-71

Used MUTI OM MINOR chain mortiser for cutting rectangular holes and mortises in wooden pieces, suitable for making window and door frames. Vertical type machine with a chain cutting head, a work table raised by rack and a manual lowering lever for the head. Technical data (manufacturer's brochure): - Manufacturer: MUTI - Model: OM MINOR - Type: Chain mortiser - Maximum mortise length: 280 mm - Vertical stroke of the head: 180 mm - Vertical travel of the work table (retractable): 230 mm - Motor: 1.8 HP (1.32 kW) - Dimensions: 1960 x 610 x 830 mm - Weight: approx. 175 kg - Equipment: chain lubrication pump, maintenance keys Condition: Used, checked by our technicians and ready to work Warehouse reference code: N051/215 Auction-ID: A7-50988-3

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-263

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-280

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-261

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-277

Fully reconditioned spindle moulder with saw disc and sliding carriage. Saw disc moves vertically and horizontally, independent motors: 3 HP / 380 V on the saw disc and 4 HP / 380 V on the spindle. Carriage travel 75 cm, saw disc diameter up to 350 mm, spindle shaft 50 mm, carriage clamp with mitre fence, spindle tool diameter up to 250 mm. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-72

- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-56

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-268

HEAVY DUTY CRAB ITALIAN REPAIRED N005/1951 2 gears in the engine Power: 5,5Hp / 380V Diameter of spinning shaft 50mm Front plate extension for large pieces Auction-ID: A7-50988-93

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-274

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-271

Professional chain mortiser by Masterwood (MUTI), model OM M250 (OM.250), Italian manufacture. Sturdy and reliable machine for daily use in a joinery workshop. Ideal for making doors, window frames, wood joints and any work requiring fast and precise mortising. Vertical type machine with a chain cutting head and a tilting work table with a graduated angle scale. Features: - Italian construction - Powerful motor - Head / table angle adjustments - Clean and precise cutting - Checked by our technicians and ready for operation Technical data: - Manufacturer: Masterwood (MUTI) - Model: OM M250 (OM.250) - Type: Chain mortiser - Vertical stroke of the head: 150 mm - Maximum workpiece height: 180 mm - Maximum mortise length: 260 mm - Cross travel of the head: 70 mm - Door height (min to max): 740 to 1030 mm - Work table size: 470 x 140 mm - Table tilt: -45 to +45 degrees - Door clamp: yes - Ch ...

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-28

LON0018 PACKED TOGETHER. A SINGLE LON0018 CORRESPONDS TO: Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 10x LON0018 PACKED TOGETHER: 155 x 1000 x h60 mm - 10 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-50963-276

Fully reconditioned spindle moulder with sliding table (carriage) for rebating, tenoning and shaping of timber pieces with precision. Motor 4 HP - 380 V. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-76

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-50963-260

Chain mortiser (mortising machine) by RGA, model SM400, used. Used for cutting rectangular and parallel mortises in wood, mainly for window and door frames. Technical specifications: Engine power 2.2kW. Max. mortise depth 150mm. Max. mortise length 340mm. Head stroke 300 x 80mm. Head rotation ±45°. Workpiece height 600-1000mm. Table size 460 x 135mm. Table tilt ±45°. Supplied with chain kit. Checked and ready to work Auction-ID: A7-50988-110