diğer metal çalışma makineleri kullanılmış satılık (10,975)

table-size: - mmvertical movement: - mmon behalf of the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool magazin:: 30 Stationen Shipping weight: ? kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 230 V: 200N dimension of workpiece: mmindex-arm vert. adjustable: xx mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 (VA), 4 (ST 40) mmcutting angle adjustment: 30 - 120 °cutting length: 200 mmthroat: 300 mmtable height: 900 mmwork stroke: max. 40 mmno. of strokes: max. 40 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 2.000 kgdimensions of the machine ca.: 1500x1300x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: max. 700 mm: : max. 1 mm: Cutting capacity structural steel: max. 1 mmCutting capacity aluminum: max. 1 mmCutting capacity stainless steel: max. 0,5 mm: : max. 1 mm: max. 1,5 mmweight of the machine ca.: ca. 150 kgdimensions: 1200 x 400 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: xxx N0: 270x160x85 mmweight: 13,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data • Manufacturer: Komage • Model: S60 CNC • Year of construction: 2011 • Drive: Hydraulic • Press system: Flexible, modular press system based on the ejection method • Operating hours: approx. 20 hours • Total lifts: 3,207 For sale is a Komage S60 CNC powder press in exceptionally good condition. The machine was used exclusively for testing purposes and therefore has only approximately 20 operating hours and 3,207 strokes. The press is in near-mint condition, both technically and visually. There are no significant signs of wear. It is ideally suited for companies seeking a high-quality CNC powder press in virtually unused condition. Equipment • High-performance hydraulic powder press • CNC control • Flexible, modular press system • Ready for immediate use Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Kaltenbach Year of Manufacture: 2015 Model: MSK 471 NA Type of Machine: Long Goods Saw / Length-Cutting Saw Operating Hours: Approximately 12,000 hours Compressed Air Connection: 6 bar Operating Voltage: 3x 400V, 50Hz Total Nominal Current: 100A Optional Equipment: Rod guide available Condition: Used, functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FASTEMS Year of Manufacture: 2012 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty Technical Specifications: - Control: Fastems MMS4 - Power Consumption: 71 kVA - Current: 56A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 23m length x 5.1m height - Shelf Spaces: 84 total (61 spaces at 630mm height, 23 spaces at 885mm height) - Pallet Size: 630 x 630mm - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Originally Designed For: 3x GROB G550 - Prepared For: 3 machines - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis - (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup  ...

Manufacturer: FASTEMS Year of Manufacture: 2007 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty (MLS-MD) - Linear Pallet Storage System Technical Specifications: - Control: Fastems MMS4 - Current: 3x63A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 18.5m length x 5.1m height - Shelf Spaces: 42 total, maximum height 1095mm each - Pallet Size: 630 x 500m - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Designed For: 2x Heller FP4000 - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Special Feature: Retrofit performed in 2017 - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup st ...

Manufacturer: Indunorm Year of Manufacture: 2015 Model: Indumatik MZA-006 Type of Machine: Linear Pallet Handling System Technical Specifications: - Control: induCell - Power Consumption: 3 kVA - Current: 5A - Power Supply: 400V AC - Compressed Air Connection: Greater than 6 bar - Machine Weight: 1,600 kg - Dimensions: Approximately 6,100mm x 3,510mm - Axes: 5 axes total. X-axis, Y-axis, Z-axis and C-axis active. A-axis and B-axis not present. - Cooling System: None - Pallet Spaces: 32 - Pallet Size: 500 x 500mm - Handling Weight: 150 kg - Pallet Change: Yes - Operating Hours: No operating hour counter installed - Scope of Delivery: Complete handling system - Note: This system was previously operated with a DMG MORI DMU50. The DMU50 is not included in this sale. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for  ...

CO2 laser cutter Manufacturer: Trumpf Model: TruLaser Cell 7040 Type of Machine: TruLaser Cell 7040 Year of Manufacture: 2007 Laser Power: 5000W Beam ON Hours: 9,039 System ON Hours: 59,226 Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 1550 mmplate thickness: 6 mmdiameter of upper rolls: 228 mmdrive: elektronisch zwei angetri The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mmplate thickness: 5 mmweight: 3,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 600 mmthroat: ca. 400 – 800 mmtable diameter: - mm: 320 mm total power requirement: - kWweight of the machine ca.: 8 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: rechts Ausklink / links S fence: elektronisch ja /neinfoot pedal: mechanisch weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Available 3/2027 after medium overhaulSiemens S840 DISO 502-axis head K4,000 rpm1,000 Nm30 kW2,000 x 8,000 mm7,000 mm2,800 mm1,100 mm2,550 mm40 tools

CNC pipe bending machine Type: CNC 65 TBRE Manufacturer: CSM Year: 2010 Maximum pipe diameter: 65 mm Steel (≈ 400 MPa): Ø 65 × 2.0 mm Stainless steel (≈ 600 MPa): Ø 65 × 1.4 mm Aluminum: Ø 65 × 3.5 mm Solid round material: Ø 30 mm Maximum bending angle: 190° Machine weight: 4400 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines