diğer metal çalışma makineleri kullanılmış satılık (11,464)

included: lattice box.

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection

This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us.

XXL starter package, consisting of:- 15x – Standard clamping pliers- 5x – Multi-clamping pliers- 10x – Side clamp with eccentric- 15x – Loose cam H30- 10x – Loose cam H100- 2x – Pipe insertion knock series- 10x – Quick release bolt- 10x – Stop block 15mm- 4x – Right angle XL- 6x – Right angle- 6x – Angle of attack- 1x – Box- 1x – Insert holder- 1x – Allen key- Tool trolleyNumber 100Positions Hole diameter 28 mmCondition new Weight 280 kgDimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5)

Profile steel shears with>br>- 1 foot release>br>- Support tables>br>- Rectangular notch>br>- Hole punch incl. tools>br>round steel 32 mm>br>square steel 30 mm>br>angle steel 80 x 80 x 8 mm>br>cutting capacity flat steel 80 x 13 mm >br>punching force 36 t>br>projection 170 mm>br>working stroke 28 mm>br>working height 980 mm>br>material thickness 28 x 13 mm>br>hole diameter in sheet thickness 25x10 / 30x8 mm>br>machine weight approx. 0.8 t>br> space requirement approx. 1.8 tbr 2 x 0.8 x 1.9 m >br>condition: unchecked (6)

195 cm height 40 cm depth 94 cm width

Including paint sludge separation system

Profile Rolling / Crimping Machine manufactured in 2006. This SCHÜCO ISOMAT 4 features a maximum operating pressure of 0.8 MPa and a nominal pressure of 0.7 MPa. With a machine weight of 880 kg and an additional safety roller set weighing 250 kg, it is designed for robust performance. If you are looking to get high-quality profile rolling capabilities, consider the SCHÜCO ISOMAT 4 machine we have for sale. Contact us for further details.

Welding table "SIGMUND Professional 750 + Plasma Nitrided" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 3000 mmTable width 1500 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 1.5 tDimensions L x W x H 3.0 x 1.5 x 0.9 m Condition: never used / new (5)

Basic set 1 / 24 piecesfor table top thickness 15 and 25mm4 pcs clamps clamping height 300mm, projection variable8 pcs clamping bolts2 pcs stop 100mm4 pcs stop 150mm2 pcs stop 225mm1 piece torch holder1 pc hole brush 30mm1 pc release lotion 500ml1 pc welding table cleaner on a natural, biological basis 500mlNumber 24 positionsWeight 22 kg

Pipe bender>br>- performance 3/8" to 2" pipe>br>- tools for 3/8">br>- incl. base>br>see pictures

Pneumatic press>br>incl. tool and foot pedal>br>see pictures >br>condition: untested (6)

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block

Pneumatic press>br>pressure max. 7.5t>br>table 250 x 200mm>br>projection 100mm>br>incl. tool and foot pedal>br>see pictures >br>

Equipment/accessories: - Footswitch - Mobile base frame With a lot of bending tools See pictures Bending capacity steel pipe 2" Dimensions 1300 x 8000 x 1300 mm Machine weight approx. 250 kg

x-travel:3.000 mmy-travel:700 mmz-travel:1.200 mmSpindle RPM:2.500 1/mintool taper:SK50

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x Stop  ...

Jaw width: 125 mm With hydraulic connection

SICK Optex VT 180-N410 Optic Electronic, 6 008 790 , 0426S 12563 , Made in Japan

Electrode furnace:Capacity 5 KgInner dimension (LxWxD) 100 x 75 x 450 mmPower 0.4 kwConnection voltage 220 - 240 VSetting device 30 - 180 degreesWeight 10 kgDimensions L x W x H 570 x 200 x 150 mm Condition: never used / new (5)

Welding turntable with - foot switch- tilt/swivel by hand - speed infinitely adjustable - 250 Ampere welding current transmission Table diameter 300 mmTable load 50 KgSwivel range 90 degreesSpeed 1 - 12 infinitely variable rpmTable load 50 kg verticalTotal power requirement 220 kWMachine weight approx. 0.036 tSpace requirement approx. 0.45 x 0.43 x 0.38 m Condition: never used / new (5)

2 tension blocks: Base plate: 370mmx370mm Grid spacing 40mm Clamping surface 300mmx450mm Clamping width 300mmx300mm M12 Thread 2 tension blocks: Base plate 280mmx280mm Grid spacing 40mm Clamping surface 220mmx450mm Clamping width 220mmx220mm M12 Thread 1 grid plate: 360mmx360mm Grid spacing 40mm Base dimension 460mmx460mm M12 Thread

EBU 80 – Single-column eccentric press – Year of construction 1971 • Manufacturer: EBU Pressen • Machine type: Single-column eccentric press • Type: EBU 80 • Year of construction: 1971 • Machine number: 293 • Press force: 80 t (at 30° before subtitles) • Adjustable stroke: 12–60 mm • Plunger adjustment: 80 mm • Plunger stroke rate: 37–147 strokes/min • Weight: approx. 5,200 kg Dimensions (approx.) • Height: 2,500 mm • Width: 1,500 mm • Depth: 1,800 mm Equipment & Design • Mechanical eccentric press in heavy casting design • Large work table with T-slots • Adjustable stroke • Pneumatic unit with pressure regulator and pressure gauge • Side-mounted control cabinet with controls • Flywheel with protective cover • Tool holder on the ram Condition • Used machine • Signs of wear and tear due to age and use • Paint chipping and dirt  ...

turning diameter over bed:1000 mmturning diameter over slide rest:750 mmturning length:3000 mmweight of the machine ca.:12 tdimensions of the machine ca.:6x2,5x1,8 mspindle bore:110 mmturning speed range:900 U/minYear:1986 Equipment:- Coolant device- 1 static steady rest- 1 rotating steady rest- Faceplate 1.000 mm- Digital display- Rapid traverse

Workstation- Hole diameter: 28mm- Grid 100 x 100mm- Side walls 150mm- Table thickness 10mmTable length 1200 mmTable width 800 mmTable height 980 mmLoad capacity kgMachine weight approx. 0.95 t

Included: 1 Probe Arm Holder Computer with monitor Mahr Perthometer PAV-CV Granite measuring plate 500 mm x 700mm