içecek makineleri kullanılmış satılık (1,745)

Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle 

Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle format ...

Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  Capacity: 20 hL gross / 18–19 hL net Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Max. mash load: 600 kg Average efficiency: 83% Average lautering time: 2 hours Heating system: Double steam jacket (lateral + bottom, independent) Max. pressure: 3 bar Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperat ...

Genel Bakış Kettner kutu yıka makinesi, WAH 26 tipi, 1992 yılında üretilmiştir. Saatte 2.600 kutuya kadar üretim kapasitesiyle, mevcut dolgu hatlarında içecek kutularının temizlenmesi için uygundur. Teknik detaylar Üretici: Kettner - Sotec GmbH Model: WAH 26 Üretim yılı: 1992 Kapasite: 2.600 sandı/saat

Overview The decrater, used for unpacking bottles from crates, was manufactured in 2020 by Mühlbauer and is in excellent, like-new condition. It is ideal for automatically unpacking various bottle formats and crate types in the beverage industry. Technical Specifications  Capacity: 8,000 bottles per hour Supported Bottle/Crate Formats 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle modular crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle modular crate 0.33 l Vichy bottle / 24-bottle modular crate Scope of Delivery  Bottle unpacking unit Mühlbauer Satelite AP-0400-H

Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  Capacity: 10 hL brewhouse, up to 2 batches per day Formats: Beer, up to 20° Plato initial density Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) Power supply: 5.5 kW Air supply: 6 bar Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra � ...

Genel Bakış Bu soğuk yapıştırıcı etiketleyici 2008 yılında Alman şirketi Gernep tarafından üretilmiştir. Makine, soğuk yapıştırıcı teknolojisiyle etiket uygulamak üzere tasarlanmıştır ve hemen satışa sunulmaktadır. Teknik veriler Üretici: Gernep Model: Labetta 4/3/10 640 2A Yıl: 2008 Dönme yönü: Sol makine (şişe plakası saat yönünün tersine döner) Nominal kapasite: 14.000 şişe/saat 3.000 - 15.000 şişe/saat arasında ayarlanabilir 2 soğuk yapıştırıcı ünitesi Etiket pozisyonları: Gövde, ön, arka Şişe formatları: 0.5L NRW şişe 0.33L Vichy şişesi 0.33L Ale şişesi

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Overview This isobaric filling machine was manufactured in 1974 by Schilpp. The machine is designed for filling carbonated beverages into 0.33 L long-neck glass bottles under counter pressure. This labelling machine was manufactured in 2019 by ENOS. The machine is suitable for bottles, cans and other cylindrical containers. Technical data  Isobaric Filling Machine – Schilpp Contibloc 20/5 (1974) Capacity: Up to 4,000 bph (depending on carbonation and liquid temperature); additional capacity indication 8,000 bph (not clarified) Formats: 0.33 L long-neck glass bottles (stars available only for this format) Application: Filling of carbonated beverages Configuration: 20 filling valves (long tube design to minimize foaming), 5 crown capping heads Neck finish: 26 mm crown cap Operating pressure: 8 bar Outfeed: Small discharge table (currently connected directly to labeller, no infeed table) ...

Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data  Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

Genel Bakış Bu 20HL bira fabrikası 2014 yılında İspanyol üretici INOX DUBRA tarafından inşa edilmiştir. Her zaman ziyaret edilebilir.    Teknik Detaylar Döküntü wort: 20 HL buharla ısıtılan Elektrik paneli, hem pompaları hem ısıtma sıcaklığını kontrol etmek için Vana açılması manuel olarak yapılır Scope 2 kap birahanesi 1x su deposu 3300L soğutucu ile ısı değiştirici aksesuarları, iki pompa vb.  

Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) bottles.The system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,00 ...

Konveyör teknolojisiyle paletleme

Sizi ziyaret etmekten ve makinenizi planlamaktan memnuniyet duyarız. Ayrıca, kafes şişe konveyörlerinin adaptasyonu da bizim tarafımızdan yapılabilir. Ayrıca yeni gripper başlıkları da üretebiliriz.

Sizi ziyaret etmekten ve makinenizi planlamaktan memnuniyet duyarız. Ayrıca, kafes şişe konveyörlerinin adaptasyonu da bizim tarafımızdan yapılabilir. Ayrıca yeni gripper başlıkları da üretebiliriz.

Rico 2 Head Packer için 2 x 6 Şarap Kutusu 2 x 6 Kutu

1 kafalı paketleyici Vdf konteyner

Pack -Tec palet yılı 2019 6 12 20 kutu Dar alan gereksinimi

Krones şişe yıkayıcı 2001 yılında üretilmiştir 676-039 6000 şişe/saat 0.2l-1.0l şişe Makine Aralık 2026'da satışa çıkacak

Eğimli konveyörlü kutu yıkayıcı Makinenizi planlamaktan memnuniyet duyarız, ve değişim, konveyör teknolojisini destekliyor

0.5 l Braket 0.5l Euro 0.33l Uzun bacak

0.5l Braket 0.5 l Euro 0.33 l Uzun bacak

Makine çok iyi durumda ve salıncak kapaklı şişeler de sürülebilir 0.5l Braket 0.5l Euro 0.33l Uzun bacak

Heuft Inspector, 0.5l Euro 0.5l Braket 0.33l Longbacak Şişe için Makine bizim tarafımızdan planlanabilir ve şişe koşusu ayarlanabilir.

Klinger şişe yıkama makinesi de salıncak üstü şişeler için. Makine bizim tarafımızdan planlanabilir ve kurulabilir. Ayrıca ek konveyör teknolojisi de sağlayabiliriz

Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...