içecek makineleri kullanılmış satılık (1,745)

Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data Capacity: approx. 15,000 L/h Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) Configuration: Multi-tank system (product tank, vacuum tank, saturator) Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) CO₂ content: approx. 6.5 – 7 g/l Electrical: 380 V, 3-phase Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  Premix beverage mixer | Stork J ...

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Genel Bakış Bu otomatik krater, 1996 yılında Alman şirketi Otto Fleischer tarafından üretilmiştir. Rota/1/E modeli, tek başlı bir paketleme makinesidir. Hâlâ kurulu ve hemen kullanılabilir. Teknik veriler Üretici: Otto Fleischer Tip: Rota/1/E Üretim yılı: 1996 İşlenen şişe formatları: 0.7L (GDB) Çalışma basıncı: yaklaşık 6 bar Güç kaynağı: 380 V / 50 Hz / N / PE Bağlı yük: yaklaşık 4 kW Kontrol voltajı: 24 V

Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...

Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle car ...

Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate inf ...

Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours:  ...

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery  Labelling machine | GERNEP ...

Overview  This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data  Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery  Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system  

Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg

Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C ...

Velcorin dozlama sistemi, Lanxess tarafından içecek hazırlamak için geliştirilmiştir. Sistem, Velcorin koruyucusunu hassas dozlayan ve endüstriyel kullanım için tasarlanmış bir dozlama pompasına sahiptir. Sistem zaten sökülmüş ve toplanmaya hazırdır. Teknik detaylar Kapasite (içecek hacmi): 6.000 - 36.000 l/h Dozaj hızı: 20 ml'ye kadar Velcorin / hl Akış ölçer Kaplama + Hauser Talep karşısında daha fazla detay.

Krones AG Smartpac / Smartpak U 1400 T Unpacker İçecek üretim hatları için verimli açma çözümü Genel Bilgiler Üretici: Krones AG Model: Smartpac / Smartpak U 1400 T Makine Tipi: Paketten Çıkarıcı (Paletten Çıkarma / Kutu Açma Sistemi) Fabrika Numarası: KR66147 Üretim Yılı: 2011 Teknik Özellikler Nominal Voltaj: 400 / 230 V Makine Boyutu: 1400 (tek sütunlu tasarım) Çıkış Kapasitesi: yaklaşık 520 döngü/saat (konfigürasyona bağlı olarak) Makine Genel Bakış Krones Smartpac U 1400 T, kutulardan, kutulardan veya tepsilerden kapların verimli ve nazikçe çıkarılması için tasarlanmış tek sütunlu bir açma makinesidir. Esnekliği ve güvenilirliği nedeniyle içecek üretiminde yaygın olarak kullanılan kanıtlanmış Smartpac serisinin bir parçasıdır.

Overview This filling monoblock was manufactured by MBF in 2001 and is designed for the filling of hot fruit juice (up to 95°C). The Synchrofil LV operates with an atmospheric (gravity) filling system and includes an integrated capping unit for aluminum screw caps (MCA standard). The machine is equipped with 35 filling valves and 4 rolling capping heads. It is adjusted for 1.0 L and 0.5 L VdF glass bottles with a diameter of 89.5 mm. The machine runs clockwise l-r and reaches a capacity of up to 7,000 bottles per hour. It is equipped with automatic speed control, CIP tank for automatic cleaning, and closure control systems. Technical Data manufacturer: MBF model: Synchrofil LV 1200-35 / 240-4V year of manufacture: 2001 condition: used filling system: atmospheric (gravity) filling temperature: up to 95°C number of filling valves: 35 number of capping heads: 4 (rolling heads) closure typ ...

Overview  This set of 2 inkjet coders was manufactured in 2021 by VIDEOJET. The machines were used for inkjet coding on glass bottles and were in service until September 2025 in a complete RGB line (330 ml). The units are currently stopped, still installed, with energy disconnected. They are available immediately and can be visited on request. Technical data  Capacity: 500 meters/min (up to 60,000 bph) Application: Inkjet coding for glass bottles Maintenance was carried out twice per year; the last maintenance took place in January 2025 Scope of Delivery  Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles Inkjet coder | VIDEOJET | 1880 | 2021 | Inkjet coding unit for glass bottles

Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...

Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data Brewhouse System – Inox GC (1,500 L) Capacity per batch: 1,500 L Vessels: HLT, mash/lauter tun, kettle/whirlpool Material: AISI 304 stainless steel Heating: Compatible with automatic gas burner Includes: Temperature control panel, integrated pumps Isothermal Mash & Whirlpool Tun (2,000 L) Capacity: 2,000 L Insulation: 50 mm rock wool Features: Hinged lids, agitator with VFD, CIP system, PT100 probe Isothermal Lauter Tun (2,500 L) Capacity: 2,500 L Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic  ...

Genel Bakış: 2004 yılında Alman şirketi Dr. Datz Maschinenbau GmbH tarafından üretilen bu güvenilir 24 başlı tel bail kapağı, şişelerin tel bail kapayılarını güvenli şekilde kapatmak için tasarlanmıştır. Şişeleme hatlarında verimli ve hassas kapalı işlemler için ideal, yüksek kaliteli Alman yapımı bir makinedir. Teknik Detaylar: Üretici: Dr. Datz Maschinenbau GmbH Tip: BVM 24R Üretim Yılı: 2004 Kapatma İstasyonları Sayısı: 24 Kapatma Tipi: Tel bail kapayıları Makine Yön: Soldan sağa

Genel Bakış Bu palet etiketleyici 2007 yılında Alman şirketi Logopak tarafından üretilmiştir. Üretici: Logopak Model: 920 PF Paletler için kendiliğinden yapışkan etiket. Etiket boyutu: A5

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Genel Bakış Sap aplikatörü, 2001 yılında Alman projesi Automation & Engineering GmbH tarafından üretildi ve yakın zamana kadar büyük bir Alman gazlı içecek üreticisinde PET dolum hattının parçasıydı. Sap aplikatörü şu anda piyasaya sürülmektedir. Teknik veriler Toplam çıkış: 70 döngü/dakika elektrik bağlantısı: 400V/N/PE/50Hz, 3,6kW İki şerit Ek bilgi Paketler için mevcut en iyi tarih kodlama şişesi (Videojet Excel 170i Ultra Yüksek Hız) konveyör paketler için mevcut

Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | -

Overview This self-adhesive labelling machine was manufactured in 2011 by the German company KRONES. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. We dismantled it properly and store it in our warehouse.    Technical data Labelling method: Self-adhesive Capacity: Up to 42,000 bottles/hour Number of Autocol stations: 6 Bottle formats: 0,25 l Heineken 0,33 l Heineken Food 0,65 l Heineken 0,33 l Desperados 0,65 l Desperados

Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to  ...

APV Gaulin G132T-3.6P yüksek basınçlı homojenizer – 15.000 l/h – 250 bar – çok iyi bir durumda Kebn Heytv Iisg Hd Nedk Satışta ise, üretici APV Gaulin'den yüksek performanslı, yüksek basınçlı bir homojenizer modeli G132T-3.6P modeli ve endüstriyel olarak süt ve içecek işleme için tasarlanmıştır. Makine sürekli bakım görmüş ve iyi ve tam işlevsel durumda. Süt, yoğurt içecekleri ve benzeri ürünler için ideal olarak uygundur. Teknik veriler: Üretici: APV Gaulin Tip: G132T-3.6P İnşaat yılı: 2000 Kapasite: yaklaşık 15.000 l/h Çalışma basıncı: 250 bar'a kadar Versiyon: 2 aşamalı Pistonlar: 3 Motor gücü: 137 kW Uygulama: Süt / Yoğurt İçecekleri / Sıvı Ürünler Elektrikli dolap: mevcut Durum: Makine tamamen işlevsel Operasyon sırasında düzenli olarak servis edilir Bilinen bir kusur yok  ...

Overview  This rinsing–filling–corking triblock was manufactured in 2008 by Spanish company GyM (model Bacchus 12–16–1). It integrates bottle rinsing, atmospheric filling and corking in a compact system suitable for medium-speed wine bottling.  Technical data  Capacity: 2,500–2,800 bph Formats: Includes 2 bottle format adapters: Cava & Burgundy Magnum, Nova, Stylis & Ryn Rinsing heads: 12 Filling heads: 16 (atmospheric filling) Corking heads: 1 Power supply: Voltage: 380 V Frequency: 50 Hz Consumption: 4 kW Operating pressure: 3–6 bar

Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additio ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...