içecek makineleri kullanılmış satılık (2,116)

Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data Manufacturer: Krones Model: Lavatec KES Year of manufacture: 2004 Output: 11,000 bottles/h Containers: glass bottles Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Üretici: NETZSCH Tip: 2NL-40A Tip: NEMO® ilerleme kavansı pompası (ilerleyici kavitli pompa) Makine numarası: 212311 Akış hızı: yaklaşık 6.000 l/s Motor gücü: 2.2 kW Motor devir: 1.410 rpm. Pompa deviri: 66–122 rpm/ Hız kontrolü: mekanik olarak ayarlanabilir Yedek parça: yedek stator dahil Durumu: iyi, tam işlevsel

Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data Manufacturer: Jakü Model: EGA-CARBO Year of manufacture: 2017 Machine type: deaeration and carbonation unit for water Capacity: 120 - 12,000 l/h Components: water, CO2 Electrical supply: 400 V, 50 Hz Installed power: 16 kW Rated ...

Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system  Tank | KHS  Control system | Siemens | S7 

1.000 litrelik ZKG bira fermantasyon tankı. Tamamen yalıtımlı, yan ve alt kısımda soğutma ceketi, basınç spesifikasyonu maksimum 0.99bar. Kanal kapağı, temiz tahliyede kılıç, toplam tahliye, termometre, numune musluğu, üst/alt basınç güvenlik valfi, taşım braketi, akma, kelebek vanaları.

Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum ...

A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible.

KHS Anker Roland 10 HS – döner etiketleyici, 2004 yılında üretilmiştir 1. Genel bilgiler KHS Anker Roland 10 HS, 2004 yılında üretilen ve saatte 12.000 şişeye kadar üretim yapabilen kullanılmış bir döner etiketleyicidir. Makine, PET şişelerin sürekli sarıma etiketlenmesi için tasarlanmıştır ve içecek endüstrisindeki mevcut dolum ve ambalaj hatlarına entegre edilebilmek için uygundur. Etiketleme, ilk ve son yapıştırma ile sıcak eritme süreciyle gerçekleştirilir. Bu amaçla makine iki KHS yapıştırıcı üniteyle donatılmıştır. Şişeler, tek bölümlü bir vida ve döner tablalar ile merkezleme çanları arasında sabitlenen bir besleme yıldızı aracılığıyla etiketleme karuseline beslenir. İlk yapıştırma sistemi, etiketin şarjörden alınmasını sağlarken, son yapıştırma etiketin örtüşmesini sağlar. Makine, 0.5 ve 1.0 l ...

Edelstahl-Filterkerzen 316L von NORDFILTERÄußerst robuste Konstruktion und hohe mechanische Festigkeit.Für aggressive Lösungsmittel sowie viskose und heiße Lösungen geeignet.Rückspülbar, Reinigung mit chemischen Lösungsmitteln, heißem Wasser oder Dampf möglich.Lange Standzeit, die plissierte Ausführung bietet eine größere Filtrationsfläche.Typische Anwendungen:Dampffiltration.Vorfiltration und Entkarbonisierung hochviskoser Flüssigkeiten.Entfernung von Verunreinigungen aus Flüssigkeiten in der petrochemischen Industrie.Filtration aggressiver Lösungsmittel.Reinigung stark korrosiver Flüssigkeiten und Gase.Filtration von Flüssigkeiten und Gasen bei hohen Temperaturen und Drücken.Technische Daten:Werkstoff: Edelstahl SUS316L / 316L.Ausführung STP – plissiert: Plissiertes Edelstahlgewebe, Trennschärfen 5, 10, 20, 25 und 50 µm, Porosität 65–85 %.Ausführung STS � ...

Burada ÖTEL'den EUROFÜLLER tipi kullanılmış bir kutu dolgu çantası sunuyorum. Yapım yılı 2019 Performans: 3 litreden saatte 360 poşete 5 litreden saatte 300 torbaya kadar 10 litreden saatte 240 torbaya kadar IDM ile dolgu / dozlama Kontrol paneli • Neredeyse tüm sıvılar için uygulama aralığı • Sağlam paslanmaz çelik yapı • Yüksek kaliteli ekipman (Siemens, Festo) • İyi kullanılabilirlik • Önden seçilebilir program türleri (CIP, ön akış, üretim, bakım) • İyi erişilebilirliğe sahip bakım dostu tasarım • Makine, EC Makine Direktifi 2006/42/EC ile uyumludur

Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details Year of manufacture: 2023 Output: 35,000 cans/h Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm Treatment surface: 9 m², single deck, 1 module Treatment time: min. 4.5 minutes Product temperature: 5 °C inlet, 25 °C outlet Spray water temperature: 40 °C Steam consumption: ...

Overview This Gernep Labetta 10-640 2SK is a rotary self-adhesive labelling machine for glass bottles, built in 2007 and used in spirits production. It works with a 10-station carousel and two self-adhesive labelling stations for front/body and back labels, at an output of 8,000 bottles per hour (up to 10,000 bottles per hour depending on the format). The machine comes with format parts and format documentation for 0.7 l, 0.75 l and 1.0 l glass bottles. It is dismantled and stored. Technical data Manufacturer: Gernep Model: Labetta 10-640 2SK Year of manufacture: 2007 Machine type: rotary self-adhesive labeller Containers: glass bottles 0.7 l, 0.75 l and 1.0 l Output: 8,000 bottles/h, up to 10,000 bottles/h depending on format Carousel: 10 stations with rotating bottle plates and spring-loaded top centering Labelling stations: 2 self-adhesive dispensers Label positions: front/body label  ...

Overview This KKT Kraus KLC 126 N is an air-cooled industrial chiller, built in 2003. It runs on refrigerant R407C, with the condenser fans on top and the control cabinet built into one end face. It served a Krones Contiform S24 blow moulder and was in production until March 2026. Dismantled in October 2026, it is now stored and ready for loading. Technical data Manufacturer: KKT Kraus Model: KLC 126 N Year of manufacture: 2003 Machine type: air-cooled chiller Refrigerant: R407C, max. filling weight 43.5 kg Max. operating pressure: 28 bar Power supply: 400 V, 3 phases, 50 Hz Max. power input: 64 kW Max. current consumption: 118 A Main fuse: 160 A CE marked Equipment Air-cooled condenser with axial fans on top of the housing Integrated control cabinet with digital temperature controller, indicator lamps, selector switch and main switch Pipe connections on the end face opposite the control ...

Overview This KKT Kraus KLC 126 N is an air-cooled compact chiller for industrial process cooling, built in 2004 by KKT-Kraus Industriekühlung GmbH (Germany). The unit combines the refrigeration circuit, the air-cooled condenser with top-mounted fans and the control cabinet in one enclosed housing. The water circuit connects via two flanged connections with pressure gauge on the end face. It cooled the process water of a Krones Contiform S24 stretch blow moulder. Technical data Manufacturer: KKT-Kraus Industriekühlung GmbH (Germany) Model: KLC 126 N Year of manufacture: 2004 Machine type: air-cooled compact chiller Refrigerant: R407C, filling weight max. 43.5 kg Max. operating pressure: 28 bar Power supply: 400 V, 3 phases, 50 Hz Max. power input: 67.5 kW Max. current consumption: 127 A Main fuse: 160 A CE marked Equipment Refrigeration circuit with air-cooled condenser coils along the ...

Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulders infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data Manufacturer: Krones Machine type: preform feeding system for a stretch blow moulding machine Operated with: Krones Contiform S24 blow moulder In production until: March 2026 Scope of Delivery Preform buffer silo | Krones | stainless steel hopper with access stairs Preform elevator | Krones | inclined elevator from the silo to the roller sorter Roller sorter | Krones | orients t ...

Overview Automatic keg cleaning and filling machine M+F KEG-Technik MINOMAT A 5/4 (1998) with upstream keg outside washer M+F AW 1100 (2000). Compact single-row keg line with roller conveyors for keg infeed and discharge, for kegs with flat fitting. Output 45-50 kegs per hour. Suitable for craft and large breweries. Technical data Manufacturer: M+F KEG-Technik Keg cleaning and filling machine: MINOMAT A 5/4, year of manufacture 1998 Keg outside washer: AW 1100, year of manufacture 2000 Output: 45-50 kegs/h Keg fitting: flat fitting Control: Siemens S5 PLC Power supply: 230/400 V, 50 Hz Control voltage: 24 V DC Operating pressure: 5.5 bar (MINOMAT A 5/4), 3.5 bar (AW 1100) CE marked Scope of Delivery Keg outside washer | M+F KEG-Technik | AW 1100 | brush washing of the keg exterior | 2000 Keg cleaning and filling machine | M+F KEG-Technik | MINOMAT A 5/4 | automatic cleaning and filling,  ...

7 kafa, 70 fıçı/saat 4.27 Serbest ve iyi durumda uwemetzlerdingslebener

Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data Manufacturer: Haloila Model: Octopus Compact, inline version Year of manufacture: 2016 Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) Designed output: 3 ...

Üfleme makinesi SIG Blomax 8 KHS Aseptik dolgu ve kaplayıcı Kapasite: yaklaşık. 0,5 litre göre 15.000 bph. PET şişeler Dolum ürünü: meyve suyu ve çay Şişe boyutu: 500 ml PET şişeler Kapanış türü: PCO 28 - 1810 Aseptik sistem, ıslak bir aseptik sistemdir. Üretim yılı: 2009 mevcut makinelerden oluşanlar: inchBlowing makinesi SIG Blomax 8 KHS Aseptik dolgu ve kaplayıcı Kapasite: yaklaşık. 0,5 litre göre 15.000 bph. PET şişeler Dolum ürünü: meyve suyu ve çay Şişe boyutu: 500 ml PET şişeler Kapanış türü: PCO 28 - 1810 Aseptik sistem, ıslak bir aseptik sistemdir. Üretim yılı: 2009 mevcut makinelerden oluşanlar: Üfleme makinesi SIG Tip Blomax 8 Preform besleme sistemi Hava konveyör sistemi KHS Aseptik dolgu ve kaplayıcı Kapsül besleme ünitesi Soğutucu (bir kompresör çalışmıyor) HEPA F ...

Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data Manufacturer: SIG Corpoplast Model: BLOMAX 18 Series III Year of construction: 2003 Machine type: rotary stretch blow moulder for PET bottles Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base Blow air press ...

Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data Product: still wine Containers: glass bottles, design bottle 0.75 l Line output: 12,000 bottles/h Closures: natural cork, aluminium roll-on screw caps, shrink capsules Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off dep ...

Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper Application: filling and closing of glass bottles Fil ...

Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data Manufacturer: Krones Model: AirCo Year of manufacture: 2011 Machine type: air conveyor, neck handling of empty PET bottles Total conveyor length: approx. 60 m Declining sections: 10 sections at 10°, approx. 16.8 m in total Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right Fan units: 7, each with filter housing Diverter: 1 Conveyor sections In  ...

Overview This GALDI RG50/2 UCS is an automatic form-fill-seal machine for gable-top cartons, built in 2007 in Italy. It erects the cartons from flat blanks, fills and seals them at up to 3,000 cycles per hour, and a cap applicator is included. The machine currently fills liquid egg products and is suitable for milk and other liquid food products. It is still installed and in production. Technical data Manufacturer: GALDI (Italy) Model: RG50/2 UCS Year of manufacture: 2007 Machine type: automatic form-fill-seal machine for gable-top cartons Capacity: up to 3,000 cycles per hour Carton format: 95 x 95 mm cross section Products: liquid egg products; suitable for milk and other liquid foods Installed power: 28 kW Power supply: 380 V / 50 Hz Weight: 5,000 kg Equipment Magazine for flat carton blanks Filling station with sanitary product valves Cap applicator Control panel with QuickPanel View ...

Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data Manufacturer: Scaligera Model: ULISSE 4000 Year of manufacture: 2016 Machine type: sleeve labeler with steam shrink tunnel Output: up to 4,000 cans/h Containers: sleek and standard cans Machine direction: left to right Power supply: 400 V, 3-phase, 50 Hz Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) Max. current: sleever 7 A,  ...

Overview Robotic end-of-line palletizing system from a wine bottling plant, consisting of two ABB FlexPalletizer robot cells, an empty-pallet destacker, a Strapex SWR 30 rotating-ring stretch wrapper with its chain conveyor, and the safety fencing of the installation. The robots stack the packed cases onto pallets fed from the destacker; the loaded pallets run on the chain conveyor through the wrapper. The system is still installed in Belgium and can be viewed by appointment. Technical data Robots: 2 x ABB FlexPalletizer, 4-axis, each with its own ABB robot controller Gripper clearance: 1,200 x 240 mm Pallet size handled by the destacker: 1,100 x 1,200 mm Stretch wrapper: Strapex SWR 30, rotating ring, film width 500 mm, clearance diameter 2,000 mm Wrapper pallet loads: 1/4 EURO, 1/2 EURO, EURO and 1,200 x 1,000 mm, load height up to 2,400 mm Film: pre-stretched LLDPE, pre-stretch levels ...

Üretici: Pack und Palettiertechnik Rudolf Steinle Gersthofen GmbH Tip: RAPID-EK Üretim Yılı: 1993 Kutuların temel alanı: 400 mm × 300 mm, Euronorm paletleri için uygundur 1200 mm × 800 mm Kullanılabilirlik: 13.01.2027 tarihinden itibaren Söküm: alıcı tarafından İzleme: düzenlemeye göre Konum: Bavyera, Almanya Hava basıncı: 6 bar Bağlantı: 220/380 V, 50 Hz Kontrol: 24 V DC

Radenska & Steinle (RS) ARO-P3 Açıcı, genellikle şişeleme hatlarında şişeleri sandıklardan veya kutulardan açmak için kullanılan endüstriyel bir içecek makinesidir Eşya Şartı: Çalışır Durumda Kullanılabilirlik: 13.01.2027 tarihinden itibaren Söküm: alıcı tarafından İzleme: düzenlemeye göre Konum: Bavyera, Almanya Güç: 3 kW Bağlantı: 380 V, 50 Hz Hava basıncı: 6 bar

Radenska & Steinle (RS) SPN-2S, öncelikle içecek endüstrisinde geri dönebilir şişe kutularının temizlenmesinde kullanılan profesyonel bir kafes yıkayıcıdır. Eşya Şartı: Çalışır Durumda Kullanılabilirlik: 13.01.2027 tarihinden itibaren Söküm: alıcı tarafından İzlemek. Düzenlemeye göre Bağlantı: 380 V, 50 Hz Güç: 8 kW Konum: Bavyera, Almanya

Schymanski GmbH (MAG) tipi: SIRIO 8-24, ağırlıklı olarak içecek endüstrisinde geri dönebilir şişeler için kullanılan endüstriyel bir şişe yıkama makinesi / şişe yıkama makinesidir. Eşya Şartı: Çalışır Durumda Kullanılabilirlik: 13.01.2027 tarihinden itibaren Söküm: alıcı tarafından İzleme: düzenlemeye göre Konum: Bavyera, Almanya Bağlantı: 400 V, 50 Hz