freze makineleri kullanılmış satılık (2,418)

Machine type: CNC Vertical Machining Center Manufacturer / Brand: MÜGA Werkzeugmaschinen GmbH Model / Type: R6040 Year of manufacture: 2011 Serial number: ACMM6 004 Control unit: Mitsubishi M70 CNC Country of manufacture: Germany Worktable: Table size: 700 x 410 mm Max. table load: 250 kg Travel ranges: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Spindle type: Direct drive Tool system: Tool magazine capacity: 12 positions Max. tool diameter: 80 mm Max. tool length: 250 mm Feeds: Rapid traverse: up to 28 m/min Measuring systems: Renishaw tool measurement: yes Renishaw workpiece measurement: yes Electrical data: Voltage: 400 V Frequency: 50 Hz Connected load: approx. 19 kW Dimensions and weight: Overall dimensions (L x W x H): approx. 2,654 x 1,700 x 2,400 mm Approx. weight: 3,300 kg Con ...

Machine type: CNC Vertical Machining Center Manufacturer: KNUTH Werkzeugmaschinen GmbH Model / Type: VMC 1400 F Year of manufacture: 2015 Serial number: 159472 Worktable: Table size: 1800 x 800 mm Table height: 880 mm T-slots: 18 mm / 6 slots Max. table load: 2000 kg Travels: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Distance spindle–table: 120 – 830 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Main motor power: 10 kW Feed rates: Rapid traverse (X/Y/Z): 24 m/min Working feed (X/Y/Z): 10 m/min Accuracy: Positioning accuracy: ±0.005 mm Repeatability: 0.005 mm Pneumatics: Air pressure required: 6 bar Air consumption: 400 l/min Electrical data: Installed power: 35 kVA Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight: Footprint: approx. 2980 x 2150 mm Dimensions without / with chip conveyor: approx. 4310 / 5340 x 3150  ...

Machine type: Universal milling machine Model: X6336A UNUSED - approx working hours around 20 Table size: 1370 x 360 mm Table travel X/Y/Z: 1000 / 320 / 400 mm T-slots: 3 / 18 / 80 mm Max table load: 800 kg Spindle taper (vertical): ISO 40 Spindle taper (horizontal): ISO 50 Spindle quill travel: 127 mm Spindle speed (vertical): 66 – 4540 rpm Spindle speed (horizontal): 60 – 1800 rpm Main motor (vertical): 5 HP Main motor (horizontal): 4 kW Z-axis rapid motor: 1.1 kW Coolant pump motor: 90 W Distance spindle to table (vertical): 155 – 700 mm Distance spindle to table (horizontal): 0 – 400 mm Extension arm travel: 450 mm Extension arm rotation: 360° DRO: 3-axis (SINO) Control: Manual Included accessories: – NT40 milling chuck – Tool kit – Quartz working lamp – Gad tongs – Partial protection Power supply: 380 V / 50 Hz Overall dimensions (L x W x H): 2220 x  ...

Table size: 700 × 200 mm Automatic feed on X and Y axes Accessories included (vice, dividing head, milling cutters, drill bushings, etc.) Auction-ID: A7-43759-3

In pvc storage case Auction-ID: A1-42628-98

In pvc storage case Auction-ID: A1-42628-85

Auction-ID: A1-42628-100

Auction-ID: A1-43330-51

number of spindle speeds: 6.000 U/mintool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SXequipped with ITC and chip conveyor.Additional equipment:+ Full NC table 360.000  0,001 degThe machine is in a well-maintained condition.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: FH 630SX | FH630 | FH-630 | FH 630 SXThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 700 x 270 mmtaper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/minturning speed range - horizontal: 8. 110 - 1230 U/minfeeds: 8: 25 - 285 mm/minweight: 900 kgquill stroke: 60 mmtotal power requirement: 3,7 kWrange L-W-H: 1,3 x 1,38 x 1,65 mCondition: ready for operation: Video available on our website.: CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mmSlotting head: Hub 80 mmUniversal tool milling machine with 2 axis digital display and swivelingvertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Ma ...

x-travel: 6.500 mmy-travel: 1.500 mmz-travel: 2.000 mmControl: HEIDENHAIN iTNC 530 HSCI clamping table: : surface area: 7.300 x 1.200 mmtotal power requirement: kWweight of the machine ca.: 58 tdimensions of the machine ca.: 14,5 x 7,0 x 4,85 m• Heavy-duty traveling column milling machine with controlled NC milling head, fixed table, andtransversely movable column• HEIDENHAIN iTNC 530 HSCI CNC control with 15 screen and stainless steel housing,control panel movable to the front of the machine• Second operator station mounted on the machine stand• Nicolas Correa universal milling head type UAD, 0.02x0.02°, SK50• Spindle speed max. 6,000 rpm, power 28/42 kW, max. torque 1,375 Nm, two gear stages• Preloaded precision ball screw drives and servo motors in all linear axes• HEIDENHAIN HR550 electronic wireless handwheel• Operating mode 3• Hexagon M&H 3D probe• Automatic h ...

x-travel: 710 mmy-travel: 600 mmz-travel: 500 mmNC-rotary table: 630 mmspindle taper: SK 40 spindle turning speed range: 18 - 6300 U/mincontrol: DIALOG 4 feed: 2 - 3600 mm/minrapid traverse: 6 m/mintable load: max. 485 kgquill stroke: 80 mmspindle drive: 9,5 kWtotal power requirement: 20 kVAweight of the machine ca.: 4,6 tdimensions: 3,8 x 2,24 x 2,35 mAccessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.800 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 25 / 35 kWmax. Torque: 130 / 87 Nmtool taper: HSK A63 DIN 69893swivellable: B: +/- 100 °work table:: table surface area: 2.100 x 700 mmmax. table load: 1.500 kgnumber of T-slots: 7 NC-Rotary table:: table diameter: 750 mmmax. table load: 500 kgnumber of T-slots: 7 rotatable: C: 360 °tool magazin:: number of toolpositions: 30 pos.tool taper: HSK A63 DIN 69893max. tool weight: 6,0 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange-time chip to chip: 7,6 secfeeds:: rapid traverse ( X / Y / Z ): 40 m/minAccelaration: 4 m/s²feed speeds: max. 40.000 mm/minFeed force ( X / Y / Z ): 8 kNtotal power requirement: 70 kVAweight of the machine ca.: 13,0 tdimensions of t ...

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maksimum tekerlek çapı: 36 mm dişli genişliği: 36 mm max. modül: 10 dk. modül: toplam güç gereksinimi: makinenin 12 kW ağırlığı ca.: 11,2 tboyut çapı: mBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Bed size approx. L80 x W18 cm Auction-ID: A1-42986-802

cone distance min./max.: 0/108 mmPitch angle min/max: 5°/84° Pitch diameter (1:1 ratio): 152 mmpitch diameter (10:1 ratio): 216 mmDiametral pitch (finest/coarsest): 1.3/8.5 Mod.Face width gear wheel max.: 35 mmspeeds:: 98-286 weight of the machine ca.: 6577 kgdimensions of the machine ca.: 1560 x 2140 x 2200 mmEquipment/accessories:-Cutting tools-Spacer angle-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cone distance min./max.: 0-108 mmPitch angle min/max: 5°/84° Control: GE Fanuc Series 0-GC Pitch diameter (1:1 ratio): 152 mmpitch diameter (10:1 ratio): 216 mmDiametral pitch (finest/coarsest): 1.3/8.5 Mod.Face width gear wheel max.: 35 mmKnife spindle - Speed range: 41-121 U/minworking spindle speed range: 0-33.33 U/minweight: 9025 kgdimensions of the machine ca.: 2707 x 2720 x 2200 mmxmmxmmEquipment/accessories:-Knife-Chip conveyor-Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with various milling cutter and machine accessories. Auction-ID: A1-42986-803

Öğütme çapı: Mm, öğütme uzunluğu: mmmax. modül: 0 dakika. modül: 0toplam güç gereksinimi: makinenin kW ağırlığı ca.: gerekli alan: mBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Öğütme çapı: Mm, öğütme uzunluğu: mmmax. modül: 0 dakika. modül: 0toplam güç gereksinimi: makinenin kW ağırlığı ca.: gerekli alan: mBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-travel: 4000 mmy-travel: 1200 mmz-travel: 1000 mmControl: Heidenhain type: iTNC 530 milling-head swivable +/-: 90 °spindle taper ISO: 50 table surface area: 4200x1000 mmchip conveyor: Rapid movement: 10.000 mm/minspindle: 28 kWturning speeds: 50-4000 U/mintransmission ratio: 2 : coolant: total power requirement: 70 kWweight of the machine ca.: 21,4 tdimensions of the machine ca.: mHead 2 axis controlThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are pos ...

x-travel: 200 mmy-travel: 200 mmz-travel: 400 mmControl: Siemens 840 D total power requirement: 84 kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-seyahat: 4300 mmy-seyahat: 1000 mmz-yolculuk: 1700 mmKontrol: TNC430 : : ja Bu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturuldu.

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/mintransmission ratio: 2 drive capacity - spindle motor: 6 kWtension force: 10 kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mIncludes:Heidenhain TNC124 point-to-point controlElectrical documentation availableCoolant system2 work lightsMachine viseVarious tool holdersVarious SK40 toolsEnclosure with 2 sliding doors available, pictures to followThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmCNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/mintable-size: 620 x 390 mmtable load: 250 kgpower capacity: 5,5 kWfeeds -stepless-: 2 - 6.000 mm/minquill stroke: 80 mmcoolant: voltage: 380 Vtotal power requirement: 11,0 kVAweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,85 x 1,90 x 1,80 melectric cabinet: 1,35 x 0,70 x 1,70 m- Serial-No.: 2836-0175- control: DIALOG 11- electrical hand wheel- horizontal milling spindle- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Taiwan : 48000 €: 916.8 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidway ...

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.