diğer ahşap çalışma makineleri kullanılmış satılık (1,366)

Üretici: Haas Model: HSZ-R 500 x 1800 Üretim Yılı: 2008 Makine Tipi: Islak Çekiç Mil Durum: Kullanılan Teknik Özellikler - Rotor çapı: 1300 mm - Makine giriş genişliği: 1800 mm - Perforasyon (teslim edildiği gibi): 16 mm çapında - Çekiç aletleri sayısı (tam takım): 440 parça - Öğütme çubukları bölgesi 1 (Mahlleisten Ml.1): 54 parça - Öğütme çubukları bölgesi 2 (Mahlleisten Ml.2): 42 parça - Toplam makine ağırlığı (motor dahil): yaklaşık 12.350 kg - Yem kanalı ağırlığı: yaklaşık 1.100 kg - Ses gücü seviyesi (tam yükte, 5 m mesafe): 90 dB(A) - Hidrolik ünite

Dimensions (L/W/H): 2070x800x2500 mmWeight: 450 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2570x1100x2490 mmWeight: 400 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x800x2500 mmWeight: 400 kgTotal power requirement: 2,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 100 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 90 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kenar bantlama makinesi Tip: EDGETEQ S-300 Üretici: Homag Yıl: 2020 Makine iyi durumda, tam işlevsel, güç altında Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Üretici: Italpresse Model: BG/660 Üretim Yılı: 2002 Teknik Özellikler - Kontrol Voltajı: 220 V - Çalışma Voltajı: 400 V - Frekans: 50 Hz - Fazlar: 3+MP+PE - Maksimum Güç: 108 kW - Maksimum akım: 160 A - Kablo Kesit (Besleme): 70 mm2 - Statik Yük Kapasitesi: 27.500 daN - Dinamik Yük Kapasitesi (aletle): 36.000 daN Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Üretici: Brandt Makine Türü: Kenar Bantlama Makinesi Model: KDF 220 Üretim Yılı: 2012 Teknik Özellikler - Besleme Voltajı: 400Y/230V - Fazlar: 3 Faz - Frekans: 50 Hz - Sigorta: 16 A - Maksimum Tam Yük Akımı: 14 A - Kısa devre akımı derecesi: 5 kA rms simetrik - Kontrol Voltajı: 24 V - En Büyük Motor: 4.5 A - En Büyük Isıtıcı: 2.4 A - Koruma Tipi: 1 Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Manufacturer: Fraxinus - Desco , Year: 2008, Superordinate control: yes, Cycle performance units/min: 5, Work piece width min-max mm: 155-1070, Min.-max. workpiece length in mm: 482-3000, Min.-max. workpiece height in mm: 18-250, Vorschub der Montage m/min: regelbar, Roboterbeschickung für Pappe: yes, Stacking locations: 3, Ausrichtlineal Montagelinie: yes, Length of wrapping belt mm: 25000, Roboteraufstapelanlage: yes, Stacking locations: 3, Carton at pallet: yes, Stacking patterns possible: yes, Discharge station: 1, Einschleussstation: yes, Packing belts: 1, Automatic carton sealer: yes, Folieneischlagstation : yes, Folienbreite max mm: 1500, Foleinschrumpfanlage: yes, Stacking robot: yes, Stacking locations: 2, Pallet buffer: yes, Automatic pallet wrapper: no, Pallet buffer: yes, Feeding speed adjustable: yes, Feed out conveyor for pallets: yes, Sice - euro-pallet: yes, Belt width m ...

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996

Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece sup ...

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: IMA, Type: Novimat K/I/G80/1005/SR3 L12, Year: 2000, Program: IMA, Control: IMATRONIC 100, Work piece width min-max mm: 140 - 600, Min.-max. workpiece height in mm: 16 - 32, Min-max feed m/min: 5 - 25, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, Coil magazine: 12 fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Corner trace buffing: yes, Corner trace buffing: yes, Barcode: yes, Freiplätze: 1, Machine lenght mm: 12300, Noise enclosure: yes, Rückführung Typ: yes, Year :2000

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben 1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rol ...

Manufacturer: IMA Nowimat Leistenmaschine, Type: U/F/12/360, Year: 1996, Min-max edge material mm: 3-12, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 10-25, Premilling: yes, Application of separation agent: no, Coil magazine: 1-fach, Strip magazin: Ja, Min.-max. batten magazine mm: yes, Mitre stations: yes, Radius milling axis adjustment: yes, Corner tracing type: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: no, Bonding part EVA: yes, Groove milling: Freiplätze 3, Workpiece support: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1996

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze: ...

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: Homag PU und EVA, Type: KAL 310 310/6/A3/S2, Year: 2008, Control: NC 22, Software: Homag, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 10-25, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: 2-fach, Mitre stations: HL 81, Bevel milling: yes, Corner tracing type: FF 12, 4 motors: Ja, Radius scraper: yes, Type of scraper: PN 10, Flat scraper: FA 11, 4 motors: Ja, Ersatzverleimteil : PU, Bonding part EVA: EVA, Buffing unit: yes, Separation agent setup: yes, Year :2008

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996