diğer metal çalışma makineleri kullanılmış satılık (10,975)

liter capacity: 2,8 lpower fuel: Benzin Old model with carburetor. Modern classic engine runs, but has been removed for about 10 years. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

content: . cbmpower requirement: . kWbolt-diameter: 66 mmSwivel bucket We used the bucket on our 16-ton excavator for excavation work. Suitable for excavators up to a maximum of 22 tons. Not worn. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4070 mmy-travel: 1185 mmz-travel: 1985 mmtotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6000 x 4500 x 4000 mConsisting of: Working Range:Measuring column, longitudinal movement, X Axis 4,070 mmMeasuring slide, cross, as Y Axis (measuring head) 1,185 mmMeasuring slide, vertical, as Z Axis (vertical) 1,985 mmAdjustment of measuring head, roll axis 360 ° pitch axis 220 °Measuring table 5,000 x 2,000 mmWeight, approx. 15,000 kgSpace required 6,000 x 4,500 x 4,000 mmAccessories / Special Features :o 3D tracer head, with turning/swivelling device.o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering  ...

width: 33 mmbolt-diameter: 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 12,5 mmwidth: 600 mmheight over floor: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mEngine overhauled, 5 new rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mmgrinding width: 0 mmmax. module: min. module: total power requirement: 3 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mShaver cutter Ø, min./max. 64 - 320 mmModule range 1 - 12Shaver cutter width, max. 40 mmNo. of teeth 13 - 240Pitch block Ø 73 - 320 mmSpeeds of workpiece slide 5 / 20 / 30 / 40 teeth per min.Grinding slide speed 690 rpmGrinding slide Ø 762 mmGrinding wheel swivelling (pressure angle) 5 - 21 °Grinding slide swivelling (helical angle) 2 x 35 °Grinding slide adjustment, vertical 240 mmCutting speed 1 / 0.5 / 0.25 m/minSpindle drive 1.1 kWTotal electrical load, approx. 3 kW - 500 V - 50 HzWeight, approx. 4,200 kgAccessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers.Unfortunately the machin ...

x-travel: 450 mmy-travel: 400 mmz-travel: 400 mm: control: Heidenhain 355 cooling: total power requirement: 4 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mmy-travel: 1200 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUniversal 3D measuring center, double-column, modern software, many accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 0,5 tstroke: 500 mmheight of hook: 1750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency: 50 Hzweight: 3000 kgvoltage: 3 x 400 Voutput: 8,3 kwampere: 12 Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

packet weight: 900 kgx-travel: 200 mmnumber: 3 Stück : 2x AEG mit Steinen : 1x FAG mit Magnet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5 weight: 5 t: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 2,2 textruder diameter: x mm: x : x Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1989 angle stop: 30 -120 Gradgood condition: . : Anschlag weight: 600 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding tap pointer: . tube diameter: 5 - 20 mmtag length: 50 - 100 mmtotal wight: 1,4 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 620 mmwidth: 130 mmheight: 300 mmweight: 88 kg: Antik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2000 mmplate depth: 3500 mmplate height: 270 mmweight: 5,5 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1988 plate thickness: bei Stahl max. 3,3 mmtable:: 1100 x 700 weight: 1 tDimensions (L/W/H): 1,50 x 1,30 x 1,40 mmdrive: hydraulisch Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Krups A100 : . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 63 mmsquare edge steel: 55 mmflat steel: 100 x 25 mm: engine: 380 V, 6,3 kW weight: ca. 2.450 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measurement range: 300 - 400 mmdimension of workpiece: 300 - 400 mmcondition: gut Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: PELI 1400 : ja : ja : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 50 - 75 mmworking area: 75 - 100 mmworking area: 200 - 300 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

height: 1000 mmwidth: 720 mmdepth: 720 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 2.000 mmplate depth: 3.000 mmplate height: 600 mmweight of the machine ca.: 6 t: : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barliter capacity: 1400 m³ / mindimensions: 700 x 550 x 1100 mmtotal power requirement: 11 kWweight of the machine ca.: 275 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: RAUHEIS Hommel TKLT 1000 : ja weight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mmworking range: 80 (100) an 25 mmmilling drive: 380/420V, 18,5 KW, 50 Hz kWrevolutions per minute: Fräsantrieb: 1465 U/min: . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 lcoolant tank: mit Spänekasten lcontrol panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 220/380/420 V ampere: 4.75/2.75 Amotor speeds:: 1420 U/min. engine output: 1,1 kWweight: 100 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1978 : für Stangenprofile und... : ... für Flachmaterial material thickness: max. 24 mmworking length: 300 - 600 mmefective widths: 3 mal 170 mmdrive motor: 400 V, 11 kW, 50 Hz : . Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.