diğer metal çalışma makineleri kullanılmış satılık (10,969)

inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/mindrive motor: 0,55 kWtotal power requirement: 0,55 kWweight of the machine ca.: 50 kgdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mmShipping weight: ? kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 630 mmtable load: 1 ttable height: 170 mmtotal power requirement: 0 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 900750170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 160 mmtotal power requirement: 0 kWShipping weight: ca. 700 kgPacking: - mmVarious chucks, jaws, tensioners etc - see photosThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 6 diameter: 160 mmturning length: ? mmtotal power requirement: 0 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,20,81 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 665 mmy-travel: 465 mmz-travel: 350 mmweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,11,12,2 mNo. 02983D measuring machine DEA OMICRON A 001Working area: 665 x 465 x 350TROLL - microprocessor systemL x W x H 1100 x 1100 x 2200 mmWeight approx. 620 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: ? mmpower requirement: 1 kWtotal power requirement: 1 kWweight of the machine ca.: ? tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeve Ø28 mm -Type: F28X2X75 -Recording: MK2 -Quantity: 2x adjusting sleeves available -Price: per piece -Dimensions: Ø 40 x 170 mm -Total weight: 0.6 kg/pc.

A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible.

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Key data: 600 mm, 400 mm, 310 mm

En iyi durumda yüksek kaliteli FANUC tel EDM makinesi. Makine iyi bakımlıdır, çalışmaya hazırdır ve alet, kalıp ve hassas makine yapımında hassas tel EDM çalışmaları için uygundur. Üretici: FANUC Model: ROBOCUT α-1iD Tip: A04B-0320-B001 #E5 Makine No.: P089D1671 Üretim yılı: 09/2008 Kontrol: FANUC Serisi 310iS-WA Makine Tipi: CNC Tel EDM Makinesi X ekseni: 600 mm Y ekseni: 400 mm Z ekseni: 310 mm U ekseni: 200 mm V ekseni: 200 mm Hızlı dönüş X: 900 mm/dakika Hızlı dönüş Y: 900 mm/dakika Hızlı dönüş Z: 900 mm/dakika Hızlı dönüş U: 450 mm/dakika Hızlı dönüş V: 450 mm/dakika Maksimum iş parçası ağırlığı: 1.000 kg Makine ağırlığı: 3.000 kg Ana bağlantı: 200 V AC, 3 fazlı, 50/60 Hz Bağlı yük: 13 kVA Telin otomatik dişlenmesi Tam bir banyoda işleme Uygun tel çapı: 0,10-0,30 mm Durum: En İyi Durum  ...

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Teknik veriler: Üretici: Keyence Tür: XM-C1000 Serisi 3D Projektör Kontrol: Keyence Ölçüm aralığı: 600 x 300 x 200 mm En küçük ekran birimi: 1 μm Minimum açı: 0.0001 Masa yükü: maksimum 25 kg Bireysel bileşenler 3D Üretim Probu: XM-P2000 Koordinat Ölçüm Makinesi| XM-C1000 3D İmhalat Ölçüm Sistemi Monitörü: XM-M1200 3D Üretim Metroloji Kontrol Ünitesi PC: XM-1600 Model RO66-55 3D Üretim Ölçüm Sistemi Kamera ve Tablo: XM-S1200 Durum Durum: Kullanıldı Fonksiyonel: test edilmiş ve tamamen işlevsel Diğer ekipman ve aksesuarlar şunları içeriyordu: Mobil alet arabası da dahil Orijinal ambalaj kutusu dahil.

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 950 mm -Depth: 420 mm -Height: 1950 mm -Shelves: 9 pieces, but only 2 mounting brackets -Door: lockable, without key -Weight: 67 kg

IRLE IRD 1600 CNC Son İşleme Makinesi Üretici: IRLE Tip: IRD 1600 CNC Üretim yılı: 2004 Kontrol: İşlenecek maksimum boru çapı 1.625 mm, en az işlenmiş boru çapı 406 mm, en fazla işlenecek boru uzunluğu 13.200 mm En az işlenen boru uzunluğu en az 6.000 mm, en az boru duvar kalınlığı 12 mm Kopyalama için maksimum boru duvarı kalınlığı yaklaşık 40 mm CNC operasyonunda işlenecek maksimum boru duvarı kalınlığı, maksimum 70 mm boru ağırlığı 250 KN alınacak Salon koridoru ile boru girişi arasındaki yükseklik 800 mm Makinenin toplam uzunluğu yaklaşık 24.000 mm Makinenin toplam genişliği yaklaşık 4.100 mm Mengenenin zeminden üst kenarına toplam yükseklik 5.000 mm Makine ağırlığı yaklaşık 700 KN 01 - Seyahat sürücülü ara yatak Yatak uzunluğu yaklaşık 3.950 mm Yatak genişliği yaklaşık 1.800 mm Yatak yüksekliği ...

ERCOLINA MB 42 / Mandrel tüp bükme makinesi -CE - Tanımlayıcı -İnşaat yılı 2009 -Bükülme kapasitesi / çelik boru 42.4x3mm -Maksimum tüp çapı alüminyum / bakır 54x2mm -Bükülme performans mobilya yapım borusu 48x1.5mm -30mm'ye kadar katı malzeme -Maksimum eğilme açısı 210 derece -Dijital ekranlı elektronik kontrol -Maksimum. 30 x program belleği -9 x bükülme içeren programlar - Aşırı Yük Koruması / Evet - Çalışma: Çift ayak pedalı (bükme - geri dönüş) -Maksimum eğilme hızı 2 rpm. -1x araç dahil. -1.1 KW -Ayak anahtarı -Dokümantasyon Boyutlar: LxWxH 0.5x0.6x1.2 metre / Ağırlık 100Kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, quick-change holder, turning tool holder, clamping holder, turning tool holder, lathe turret tool holder -Manufacturer: Kelch, tool holder steel holder -Socket: Ø 32 mm, bolt circle Ø 102x18 mm -Quantity: 1x holder available -Dimensions: 295/140/H110 mm -Weight: 8.8 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.1-100M -Hole: Ø 40 mm -Dimensions: Ø 105 x 50 mm -Weight: 2.3 kg

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Fette, roller end mills, disc cutters -Type: A175x20N -Hole: Ø 40 mm -Dimensions: Ø 166 x 18 mm -Weight: 2.5 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head, partially without indexable inserts -Cutting head: Widia type WIDAX M40 Ø 125 R-8 -Number of teeth: 8 -Hole: Ø 40 mm -Dimensions: Ø 130 x 62 mm -Weight: 3.7 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R257.1- 125 -Hole: Ø 40 mm -Dimensions: Ø 136 x 62 mm -Weight: 3.9 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm -Weight: 38.5 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head without indexable inserts -Type: WIDAX Ø 123 mm -Hole: Ø 40 mm -Quantity: 2x milling heads available -Price: per piece -Dimensions: Ø 123 x 27 mm -Weight: 1.6 kg/pc.

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widia, Indexable insert milling cutter, face milling cutter, cutter head -Type: WIDAX 1185837 Ø 125 mm -Hole: Ø 40 mm -Dimensions: Ø 125 x 27 mm -Weight: 1.7 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head corner cutter -Type: Ø 160 mm -Recording: SK50 -Dimensions: Ø 160 x 250 mm -Weight: 11.2 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: Ø 167 mm -Hole: Ø 50 mm -Dimensions: Ø 167 x 62 mm -Weight: 5.9 kg