diğer makineler ve tesisler kullanılmış satılık (18,667)

HPC300 Mounted Compactor (without rotor) New device Weight class: 1.5 - 3.5 t Weight: 115 KG (without pick-up) Centrifugal force: 30kn (3 ton) Vibration frequency: 2000 rpm Oil flow: 30-60 l/min Operating pressure: 100-130 bar Hose Connectors: Inch Base plate: 600x370x25mm Height: 670mm Attention: A hammer line (pressureless return) is required. Scope of delivery: Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-50852-805

n° 4 indoor/outdoor LED headlights \"in their original state\", never used Overall dimensions: 1200 x 800 x 400 mm Weight: 10 kg Auction-ID: A7-50799-370

Sanitary container in split design for men and women with separate entrances. Equipped with toilets, urinals, hand basins, water heating, heating and complete electrical installation. The two sanitary areas are structurally separated and each accessible via its own outer door. Hot water is provided decentrally via under-sink boilers directly at the sinks. Ventilation is done mechanically via the built-in exhaust fans. On-site connections for water, sewage and electricity are required for operation. Installation at ground level on load-bearing ground, relocation with forklift or crane possible. Thanks to forklift pockets and corner fittings, they are suitable for mobile use, both in permanent stationary operation and at changing locations. Typical assignments are construction sites, assembly and conversion phases, temporary extensions of existing sanitary facilities and events.  ...

Cone splitter HKS200 basic engine Weight class: 1.5-3 t Max Torque: 1871 Nm Weight: 55 kg without drill cone Weight: 79 KG with drill cone Operating pressure: 80-205 bar Oil flow: 23-53 l/min Wood diameter: 350mm (max) Drive shaft: 65mm (round) Drive Type: Planetary Gearbox Revolutions/min: 40 -92 Dimensions: 595x200 without taper Dimensions: 760x200 with drill cone Cone diameter: 200mm Replaceable cone tip Auction-ID: A1-50852-610

Bema 40 Classic 1550 Stapler hydraulic sweeper Brand: Bema Model: Bema 40 Classic Type: 1550 Stapler Year of construction: 2005 Machine number: 05077369 Own weight: 545 kg Product Type: Hydraulic Attachment Sweeper for Forklift / Tool Carrier Features: Hydraulic drive Head Sweeping Roller Hydraulically driven side brush Sweeping dirt collector Hydraulically operated sump Hydraulic hoses and connections Forklift pockets for forklift pick-up Adjustable forklift holder Swivel/support wheels Height-adjustable wheels Adjustable brush setting Rubber seal / dirt guide Protective caps CE marking COM-keur / Safety check contractors Inspection number 2932882 Inspection sticker with indication 2028 Application: professional attachment sweeper for cleaning industrial sites, pavements, parking lots, halls and industrial sites. Suitable for mounting on a forklift or suitable tool carrier. Condition ...

Auction-ID: A1-47422-198

Perfect to drink: now Best drink for: 2028 Stored in an air-conditioned manner (no temperature fluctuations) Fruity red wine with notes of ripe black fruit such as blackcurrants and blackberries. Sultry inset with lots of juice and ripe tannins. Drinkable and digestible. Auction-ID: A1-47449-105

Equipped with: PTO speed 540e/750/1000. Partot bluetooth, front linkage, 5 double valves at the rear, 2 valves at the front, towbar piton-fix, Trelleborg tyres at the rear, Michelin at the front. Auction-ID: A1-47394-19

Used engine Auction-ID: A1-47366-98

HÄNER HCM250 Concrete mixing bucket for wheel loaders and excavators without mount Working width: 1140 mm Height: 890 mm Depth: 710 mm Nominal capacity: 250 l Maximum capacity: 290 l Curb weight: 505 kg Concrete weight: 605 kg Total weight: 1080 kg Required oil volume: 40-90 l/min Maximum pressure range: 240 bar Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM250 concrete mixing bucket has the following data and specifications: – Side panels and base body made of 10mm S355 – Mixer screw rings made of wear-resistant HB500; thickness 12 mm – Mixer shaft made of C45 solid steel; diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free-moving rollers – central hydraulic drain port piston rod protection – high-quality hydraulic motor � ...

Used Auction-ID: A1-50849-547

Shock absorber right front broken and rear driveshaft cover torn, so it ticks while steering. Auction-ID: A1-47422-184

Dimensions: L12 x W6 x H4 m Transport dimensions: L1.2 x W1.5 x H1.2 m Power consumption: 1.5kW (220V) Setting up/dismantling: 3 people Capacity: 8 people per minute Including required 3 blowers and Dutch approval certificate. Auction-ID: A1-47449-119

The 000W electric heat gun is ideal for removing paint and enamel, deforming and welding plastic pipes, defrosting frozen non-plastic water pipes, removing adhesives, shrink tubing, and many other DIY jobs. Auction-ID: A7-50796-247

1 set of 4 pcs. Rim 9.00X15 Profile:10mm Auction-ID: A1-50849-488

Del Morino Flash 125 P Rotary Tiller / Mounted Tiller (Used machine) • Manufacturer: Del Morino • Model: Flash 125 P • Year of construction: 2016 • Serial No.: 91768 • Net weight: 125 kg • PTO speed: 540 rpm • Design: Mounted tiller / rotary tiller • Working width: approx. 125 cm • Three-point mount • PTO drive Milling unit: • Rotating milling shaft • Multiple curved cutter blades • Bolted knife mount • Lateral drive • Protective housing above the milling shaft • Height / working depth control via lateral adjustment Equipment: • Three-point buck • Angular gearboxes • PTO shaft connection • Protective funnel in the PTO area • Sturdy steel construction • Safety and warning stickers available Condition: • Used condition • Signs of wear and tear due to age and use • Paint with scratches and minor chipping • Milling blade with visible s ...

including trailer Auction-ID: A1-47422-98

In bulk and in consumer packaging. Total 6400 units. Auction-ID: A1-47449-307

Party event games. Consisting of the following games: Sling board Clog Ski Run Stick catching red disc golf large shuffleboard 2x Ball Moving 2x Stretchers Beach goals Dumbball Man doesn't annoy you 2.5 x 2.5 Bowling sets Clog Ski Run Carry chair 3 x Hockystick set Baseball Set Minigolf set large holes cheese Nerf guns Please note: accessories such as balls etc. are included, but are not in the picture. There is 1 set of shuffleboard stones for 2 shuffleboards. Auction-ID: A1-47449-124

Auction-ID: A1-47394-231

Technical data Supply voltage: 230 V / 50 Hz Motor power: 700 W Motor speed: 26000 rpm Spindle diameter: 6 mm Auction-ID: A7-50796-88

No license plate; Hela Lanz; 1 cylinder diesel; Auction-ID: A1-47394-265

1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50796-8

Häner Swivel Actuator HSA-MS03-M-4 New device Excavator weight class: 1.9 - 4 t Mount: MS03 Mechanical (Lehnhoff compatible) Excavator-side mount optional: Ø30 mm bolt (optionally convertible) Ø32 mm bolt (optionally convertible) Ø35 mm bolt (standard installed) Ø38 mm bolt (optionally convertible) Ø40 mm bolt (optionally convertible) Handle width: up to 145 mm Kinematics (center-center bolt distance): variable adjustable from 140 mm - 200 mm the following distances are adjustable (in mm) : 140; 144; 149; 155; 159; 166; 170; 174; 181; 185; 191; 196; 200) Weight: 128 kg Swivel angle: 2x 90° Torque: 900 Nm Holding torque: 2,400 Nm Recommended oil flow 30 l/min Working pressure: 180 - 210 bar Colour: RAL9005 semi-gloss + RAL6018 semi-gloss Load hooks Auction-ID: A1-50852-1670

Pair of jacks, never used Overall dimensions: 400 x 400 x 400 mm Weight: 60 kg Auction-ID: A7-50799-433

Portable Air Heater LPG/Gas Operates, Piezo Ignition, Fan, Insulated Handle, Overheat Protection, Gas Leak Protection Auction-ID: A7-50799-229

Equipped with: Swivel tipping bucket, tracks recently replaced, seat platform, Bucket size (LxWxH) 104x105x70cm Auction-ID: A1-47394-227

Kubota LA714EC front loader (new device / stock unit) • Manufacturer: Kubota • Type: LA714EC • Design: Front loader • Year of construction: 2019 • Serial number: F0672 • Net weight: 442 kg • Colour: Kubota Orange Equipment: • Hydraulic lifting cylinders • Hydraulic device actuation • Hydraulic lines and quick couplings • Front loader swingarm • Matching attachment / mounting brackets included • Various fastening and mounting parts Condition: • Still in transport / storage rack • Hydraulic lines and connections fully available • Scope of delivery according to illustrations Note: • Compatibility with the respective tractor model must be checked before installation Auction-ID: A1-50915-30029

1/2\" electric impact wrench complete with 17, 19, 21 and 22 mm CrV steel sockets. Thanks to the LCD display, the screwdriver allows you to adjust the tightening torque between 150 and 350 Nm, while when unscrewed the torque is 500 Nm. It is electrically powered, so it does not require a compressor. The screwdriver is perfect for use in mechanical workshops and domestic garages. Auction-ID: A7-50799-18

BMW 325i Coupé (E92) – Accident vehicle Vehicle data: - Manufacturer: BMW - Model: 325i Coupé (E92) - Year of manufacture: 2011 - Registration date: 17.08.2011 - Mileage: 120,591 km (according to the speedometer) - Engine: 3.0-liter gasoline engine - Displacement: 2,996 cm³ - Power: 160 kW / 218 hp - Transmission: 6-speed manual transmission - Drive: Rear-wheel drive - Body: Coupe, 2 doors - Colour: Grey/Silver Metallic Equipment (as far as can be seen): - Leather interior, black - Electrically adjustable front seats - Heated front seats - Electric glass sliding/lifting roof - Multifunction leather steering wheel - Air conditioning - BMW Business CD radio - Electric windows - Electrically adjustable exterior mirrors - Parking aid (PDC) - Alloy wheels - Fog lights - Wood décor in the interior Vehicle condition / damage: - Accident vehicle with significant body damage - Significant d ...