diğer makineler ve tesisler kullanılmış satılık (20,037)

Land Reko SCP-850-12 Abrasive Blasting Cabinet Enclosed pressure abrasive blasting cabinet for manual surface preparation and cleaning of industrial components. Manufacturer: Land Reko Sp. z o.o. sp.k. Model: SCP-850-12 Year: 2021 Serial number: 159/2021 Series: AI 2022 No. 00262 Chamber volume: 850 litres Maximum working pressure: 12 bar Electrical supply: 230 V Operating temperature: 10–50 °C Configuration: Large viewing window, twin glove ports, blasting hose/nozzle, grated work surface, pressure regulator and gauge, lighting controls, emergency stop, side access door and integrated lower pressure/blast-media vessel Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,100 × 1,900 mm Approximate weight: 350 kg All descriptions are indicative only. Auction-ID: A1-50546-4

Electrical NC joining module from Kistler with a nominal force of 10 kN, designed as an NCFH variant (linear axis with integrated force sensor). The system consists of the joining drive (blue, with servo motor and displacement measurement), a Polytec sensor head and the maXYmos NC evaluation monitor (type 5877AZ000). It is used in industrial joining technology for force-displacement-monitored assembly, e.g. for press-fitting, clinching or screwing components. The system is used and shows normal signs of wear due to use. The test equipment monitoring sticker (test year 24) is available. The device was last used in industry. Scope of delivery:1 Kistler NC joining module NCFH 10 200 300 B HC G1 Kistler maXYmos NC monitor type 5877AZ0001 Polytec sensor head (mounted)Connection cable (orange, green, black)1 Operating instructions maXYmos NC Type 5847 (folder with CD) Type joining module: NCFH ...

Used recirculating cooling unit (temperature control system) from LAUDA from the Variocool series with the model designation VC 1200/C. The unit is used for precise temperature control of processes in the laboratory and industrial sector, for example for cooling reactors, analysis equipment or other heat-sensitive processes. The cooling capacity is achieved via a refrigerant system with R-449A; the unit operates at 230 V / 50 Hz and has a power consumption of 2.8 kW. The unit is used and shows normal signs of use on the surface of the housing. There were operating stickers (temperature and pressure information) on the unit, which indicates active industrial use. Scope of delivery:1 recirculating cooling unit LAUDA Variocool VC 1200/CConnected hoses and valves (ASCO solenoid valve) visible, scope of delivery according to the condition shownWithout other accessories Type: VC 1200/C Order n ...

Optical inspection by camera, incl. LEBERT software Auction-ID: A1-50679-2

The Keyence XG-X2700 is a high-performance vision controller designed specifically for industrial applications with high demands on speed and precision. It belongs to the XG-X series and is compatible with 5 megapixel cameras. Description:- High-speed vision system for complex inspection tasks- Use in quality control, assembly supervision, robot guidance and barcode/OCR recognition- Supports various industrial network protocols such as Ethernet/IP, PROFINET and EtherCATCamera compatibility: Up to 5 MP (megapixels)Processing unit: High-performance DSPPower consumption: approx. 3.8 AWeight: approx. 1.75 kgInterfaces: Ethernet, USB, digital I/OsProgramming: User-friendly graphical interfaceDimensions: Compact, suitable for cabinet mounting Auction-ID: A7-50729-94

Electromechanical linear actuator from PROMESS from the assembly and testing technology sector. The system consists of a servo drive with an integrated measuring system and an external connection box. With a nominal torque of 1.05 Nm, a nominal speed of 6000 rpm and an integrated holding brake, the device is suitable for force- and displacement-controlled joining and press-fit processes in industrial assembly. The device is used and shows normal signs of use due to use. The components are complete and in good condition. Scope of delivery:1 Promess press-fit unit with servo drive DUM6-A4-24AW6-089B1 external connection box with M12 connectorsConnection cable between unit and junction box Type: DUM6-A4-24AW6-089B Year of manufacture: 2003 Serial number: 027516 Nominal torque (MN): 1.05 Nm Maximum torque (M0): 1.14 Nm Nominal current (IN): 1.64 A Nominal speed (nN): 6000 rpm EMF constant (k ...

26X various C-Grips in different size and type. Dimension 400 x 350 x 150 ( LxBxH in mm ) Weight approximate 15 Kg Auction-ID: A7-50717-39

Land Reko SCP-850-12 Abrasive Blasting Cabinet Enclosed pressure abrasive blasting cabinet for surface preparation and cleaning of industrial components. Manufacturer: Land Reko Sp. z o.o. sp.k. Model: SCP-850-12 Year: 2021 Serial number: 160/2021 Series: AI 2022 No. 00261 Chamber volume: 850 litres Maximum working pressure: 12 bar Electrical supply: 230 V Operating temperature: 10–50 °C Configuration: Front loading/access door with viewing window, integrated glove ports, blasting gun and hose, grated work surface, pressure controls, emergency stop and extraction connection Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,100 × 1,900 mm Approximate weight: 350 kg All descriptions are indicative only. Auction-ID: A1-50546-2

Part of the production line, power 600 W, operating pressure 6 bar Auction-ID: A1-50679-6

Ercom K-1200 Sand Blasting Machine Manual enclosed abrasive blasting cabinet for cleaning and surface preparation of industrial components. Manufacturer: Ercom Model: K-1200 Year: 2017 Serial number: 1206 Power: 2.2 kW Electrical supply: 380–400 V Frequency: 50/60 Hz Certification: CE marked Configuration: Viewing window, twin glove ports, hopper-bottom abrasive collection, external electrical control panel and extraction connection Condition: Used Operational status: Untested Dimensions: 1,200 × 1,300 × 1,745 mm Weight: 450 kg All descriptions are indicative only. Auction-ID: A1-50546-7

Connecting conveyor beltsize: 1500 x 610 x 950 mm (WxDxH) Auction-ID: A7-50729-130

DEUTZ-FAHR 9340 TTV Tractor Manufacturer: DEUTZ-FAHR Model: 9340 TTV Serial number: WSXAE50200LD50084 Year: 2019 Hours: Approx. 9,000 h Engine power: 340 HP Type: VT94 D41F Features: Front linkage, front PTO, GPS guidance/navigation, 10 rear hydraulic spool valves with tipper outlets and air conditioning Technically permissible maximum weight: 18,000 kg Auction-ID: A7-50716-1

The ESUC supply unit is used exclusively for the operation of surface cleaning devices of Dr. Escherich GmbH.It supplies these cleaning devices with high voltage for the dischargers, compressed air and provides an extraction system with filtering. Only dry dusts can be separated in the filters. Explosive, toxic, biologically active or sticky dusts and vapours must not be extracted. The device is not suitable for use in potentially explosive areas. The ESUC NC supply unit is used to operate non-contact cleaning devices such as TAIFUN-CLEAN and STATIK-AIR. The ESUC RC supply unit is used to operate ROTORCLEAN contact cleaning devices. However, these supply units can also be used for non-contact devices. The ESUC RC version is designed for the operation of max. 2 ROTORCLEAN. Frequency control of the brush speed is possible. incl. ionization module and power supplyTaifun-Clean Control Combi  ...

Part of production line for optical inspection of printed circuit boards, strip length 1200 mm Auction-ID: A1-50679-13

Part of the production line, power 100 W, operating pressure 6 bar Auction-ID: A1-50679-20

HATZENBICHLER 3000 Deep Subsoiler Manufacturer: HATZENBICHLER Model: 3000 Type: Deep subsoiler Working width: 3,000 mm Application: Deep soil loosening and breaking up compacted soil layers Auction-ID: A7-50716-11

Wall-mounted control cabinet in compact industrial design with transparent door and internal mounting rails. The housing is intended for the construction of electrical, network or control components and is suitable for the clear storage of distributions, patch components or clamping technology. The visible version includes a glazed front door, integrated cable grommets and a side ventilation area. The device is used and shows normal signs of wear and tear due to age and use. The control cabinet is offered without a key. It is sold without pictured contents. Scope of delivery:1 wall-mounted control cabinet with viewing doorInternal mounting rails and brackets according to existing designVisible internal cablesWithout keyWithout other accessories Design: Wall-mounted control cabinet with transparent door Area of application: Electrical, network or control technology Door: Front door with v ...

Lot Title: SEEWER RONDO Industrial Lamination Line – 5 Heads – Bakery / BiscuitFactory Brand: RONDOModel: QUINTOYear: 1986SEEWER RONDO Industrial Lamination and Grading Line, QUINTO Model, Swiss Manufacture, Year 1986. Intended for continuous processing of dough for biscuits, bakeries and pastry shops. Known characteristics: 5 successive lamination heads, announced working width of approx. 600 mm, large infeed hopper, integrated conveyors and adjustment of the lamination units. Machine on wheels, with manufacturer's plate present. Stock of spare parts included. The machine is installed and used in the production unit and can be seen in operation and tested by appointment. Auction-ID: A1-50735-2

Part of the production line, power 600 W, operating pressure 6 bar Auction-ID: A1-50679-12

Cherry sorting machine equipped with 16 photo cameras and 16 infrared cameras. Each cherry is photographed 35 times from different angles for detailed inspection and sorting. The machine sorts cherries by quality, size, and colour and features 17 exit lines, including A, B, C and sample grades. Capacity: 4 tonnes/hour. Auction-ID: A7-50727-1

Combination of hot plate welding machine (balti ag) and hot melt adhesive technology pump for PUR hot melt adhesives. With dosing pump and control, suitable for joining and gluing plastic parts (pipes, profiles, plates). Supplied on pallet. Function not testedWeight: approx. 200 kg; Operating voltage: 400 V, 50 Hz; Hot plate welding machine with clamping device and control; Hot melt adhesive technology Pump for PUR hot melt adhesives with control unit Auction-ID: A7-50729-115

Pilot version of a solid-state laser system with cooling water connection, controller and laser head. Suitable for precise laser processing. Controller S-V 3.35, diode max. 27.7 A, divergence < 2.5 mrad, wavelength 1064 nm, meter reading 17,986 h, dimensions approx. 500×600×1500 mm. Auction-ID: A7-50729-116

Unused stainless steel filter housing with certificate and drawingsTHREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M241217E01, year 2011, ATEX II 2 GD Auction-ID: A7-50729-170

17X Various C-Clamps Pliers in different size and type. Dimension 480 x 350 x 150 ( LxBxH in mm ) Weight approximate 14 Kg Auction-ID: A7-50717-37

Land Reko SCP-850-12 Abrasive Blasting Cabinet Enclosed pressure abrasive blasting cabinet for manual surface preparation and cleaning of industrial components. Manufacturer: Land Reko Sp. z o.o. sp.k. Model: SCP-850-12 Year: 2021 Serial number: 161/2021 Series: AI 2022 No. 00260 Chamber volume: 850 litres Maximum working pressure: 12 bar Electrical supply: 230 V Operating temperature: 10–50 °C Configuration: Large front viewing window, twin glove ports, blasting hose/nozzle, grated work surface, pressure regulator and gauge, lighting controls, emergency stop, hinged access doors and dust-extraction connection Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,100 × 1,900 mm Approximate weight: 350 kg All descriptions are indicative only. Auction-ID: A1-50546-3

Washbasin with base cabinet in complete stainless steel design- Automatic tap- Broen eye wash- 1 shelfDoor with circumferential sealDimensions: 1170x380x900 mm Auction-ID: A7-50729-153

Magazine loading systemSize: 1500 x 2850 x 1830 mm (WxDxH) Auction-ID: A7-50729-134

Shuttle Magazine Unloader Located at the end of the SMT line, this unit consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) individually into an empty magazine rack using a pneumatic slider mounted on the single shuttle. LED Tower Lamp (with Buzzer)Touch Screen (Control Panel)Controlled by PLCSMEMA InterfaceIntegrated Single Shuttle Conveyor Auction-ID: A7-50729-132

Brand: CECCATO OLINDO Model: MAGIC (Excavator) Type: Electric pellet mill Engine power: 7.5 kW Power supply Upper hopper with protective grid Integrated control box with emergency stop Full casing Mounted on wheels with handling handle Auction-ID: A1-50704-411

SINGLE MAGAZINE LOADERWorking height: 950 +/-20 mmWorking width: 250 - 510 mmSize: 1400 x 1420 x 1830 mm (WxDxH) Auction-ID: A7-50729-135