diğer makineler ve tesisler kullanılmış satılık (19,847)

DEUTZ-FAHR 9340 TTV Tractor Manufacturer: DEUTZ-FAHR Model: 9340 TTV Serial number: WSXAE50200LD50084 Year: 2019 Hours: Approx. 9,000 h Engine power: 340 HP Type: VT94 D41F Features: Front linkage, front PTO, GPS guidance/navigation, 10 rear hydraulic spool valves with tipper outlets and air conditioning Technically permissible maximum weight: 18,000 kg Auction-ID: A7-50716-1

The ESUC supply unit is used exclusively for the operation of surface cleaning devices of Dr. Escherich GmbH.It supplies these cleaning devices with high voltage for the dischargers, compressed air and provides an extraction system with filtering. Only dry dusts can be separated in the filters. Explosive, toxic, biologically active or sticky dusts and vapours must not be extracted. The device is not suitable for use in potentially explosive areas. The ESUC NC supply unit is used to operate non-contact cleaning devices such as TAIFUN-CLEAN and STATIK-AIR. The ESUC RC supply unit is used to operate ROTORCLEAN contact cleaning devices. However, these supply units can also be used for non-contact devices. The ESUC RC version is designed for the operation of max. 2 ROTORCLEAN. Frequency control of the brush speed is possible. incl. ionization module and power supplyTaifun-Clean Control Combi  ...

Part of production line for optical inspection of printed circuit boards, strip length 1200 mm Auction-ID: A1-50679-13

Part of the production line, power 100 W, operating pressure 6 bar Auction-ID: A1-50679-20

HATZENBICHLER 3000 Deep Subsoiler Manufacturer: HATZENBICHLER Model: 3000 Type: Deep subsoiler Working width: 3,000 mm Application: Deep soil loosening and breaking up compacted soil layers Auction-ID: A7-50716-11

Wall-mounted control cabinet in compact industrial design with transparent door and internal mounting rails. The housing is intended for the construction of electrical, network or control components and is suitable for the clear storage of distributions, patch components or clamping technology. The visible version includes a glazed front door, integrated cable grommets and a side ventilation area. The device is used and shows normal signs of wear and tear due to age and use. The control cabinet is offered without a key. It is sold without pictured contents. Scope of delivery:1 wall-mounted control cabinet with viewing doorInternal mounting rails and brackets according to existing designVisible internal cablesWithout keyWithout other accessories Design: Wall-mounted control cabinet with transparent door Area of application: Electrical, network or control technology Door: Front door with v ...

Lot Title: SEEWER RONDO Industrial Lamination Line – 5 Heads – Bakery / BiscuitFactory Brand: RONDOModel: QUINTOYear: 1986SEEWER RONDO Industrial Lamination and Grading Line, QUINTO Model, Swiss Manufacture, Year 1986. Intended for continuous processing of dough for biscuits, bakeries and pastry shops. Known characteristics: 5 successive lamination heads, announced working width of approx. 600 mm, large infeed hopper, integrated conveyors and adjustment of the lamination units. Machine on wheels, with manufacturer's plate present. Stock of spare parts included. The machine is installed and used in the production unit and can be seen in operation and tested by appointment. Auction-ID: A1-50735-2

Part of the production line, power 600 W, operating pressure 6 bar Auction-ID: A1-50679-12

Cherry sorting machine equipped with 16 photo cameras and 16 infrared cameras. Each cherry is photographed 35 times from different angles for detailed inspection and sorting. The machine sorts cherries by quality, size, and colour and features 17 exit lines, including A, B, C and sample grades. Capacity: 4 tonnes/hour. Auction-ID: A7-50727-1

Combination of hot plate welding machine (balti ag) and hot melt adhesive technology pump for PUR hot melt adhesives. With dosing pump and control, suitable for joining and gluing plastic parts (pipes, profiles, plates). Supplied on pallet. Function not testedWeight: approx. 200 kg; Operating voltage: 400 V, 50 Hz; Hot plate welding machine with clamping device and control; Hot melt adhesive technology Pump for PUR hot melt adhesives with control unit Auction-ID: A7-50729-115

Pilot version of a solid-state laser system with cooling water connection, controller and laser head. Suitable for precise laser processing. Controller S-V 3.35, diode max. 27.7 A, divergence < 2.5 mrad, wavelength 1064 nm, meter reading 17,986 h, dimensions approx. 500×600×1500 mm. Auction-ID: A7-50729-116

Unused stainless steel filter housing with certificate and drawingsTHREE-SIXTEEN-L Housing, Part No. ALTD11GNW15ABH4, Lot M241217E01, year 2011, ATEX II 2 GD Auction-ID: A7-50729-170

17X Various C-Clamps Pliers in different size and type. Dimension 480 x 350 x 150 ( LxBxH in mm ) Weight approximate 14 Kg Auction-ID: A7-50717-37

Land Reko SCP-850-12 Abrasive Blasting Cabinet Enclosed pressure abrasive blasting cabinet for manual surface preparation and cleaning of industrial components. Manufacturer: Land Reko Sp. z o.o. sp.k. Model: SCP-850-12 Year: 2021 Serial number: 161/2021 Series: AI 2022 No. 00260 Chamber volume: 850 litres Maximum working pressure: 12 bar Electrical supply: 230 V Operating temperature: 10–50 °C Configuration: Large front viewing window, twin glove ports, blasting hose/nozzle, grated work surface, pressure regulator and gauge, lighting controls, emergency stop, hinged access doors and dust-extraction connection Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,100 × 1,900 mm Approximate weight: 350 kg All descriptions are indicative only. Auction-ID: A1-50546-3

Washbasin with base cabinet in complete stainless steel design- Automatic tap- Broen eye wash- 1 shelfDoor with circumferential sealDimensions: 1170x380x900 mm Auction-ID: A7-50729-153

Magazine loading systemSize: 1500 x 2850 x 1830 mm (WxDxH) Auction-ID: A7-50729-134

Shuttle Magazine Unloader Located at the end of the SMT line, this unit consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) individually into an empty magazine rack using a pneumatic slider mounted on the single shuttle. LED Tower Lamp (with Buzzer)Touch Screen (Control Panel)Controlled by PLCSMEMA InterfaceIntegrated Single Shuttle Conveyor Auction-ID: A7-50729-132

Brand: CECCATO OLINDO Model: MAGIC (Excavator) Type: Electric pellet mill Engine power: 7.5 kW Power supply Upper hopper with protective grid Integrated control box with emergency stop Full casing Mounted on wheels with handling handle Auction-ID: A1-50704-411

SINGLE MAGAZINE LOADERWorking height: 950 +/-20 mmWorking width: 250 - 510 mmSize: 1400 x 1420 x 1830 mm (WxDxH) Auction-ID: A7-50729-135

Light box for viewing X-ray films, homogeneous light surface, adjustable brightness. Bulb 4×15 W; 230 V, 50 Hz, 0.63 A. Auction-ID: A7-50729-164

Kverneland RAU MXRP6 Seed Drill Manufacturer: Kverneland RAU Model: MXRP6 Serial number: S4573 Year: 2003 Features: Hydraulic folding and unfolding Condition: Fully operational and in working condition Auction-ID: A7-50716-12

22x Various heavy duty screw clamp in different size and type. Dimension 900 x 350 x 400 ( LxBxH in mm ) Weight approximate 60 Kg Auction-ID: A7-50717-36

Model: LDP150B Type: Three-phase electric pellet mill Engine power: 4 kW Power supply: 380 V – 50 Hz – 3 phases Recommended material moisture: 10–18% Production Capacity: Feed pellets: 90–120 kg/h Wood pellets: 50–100 kg/h Indicative production: 30–50 kg/h depending on the material used Galvanized steel feed hopper with protective grid Direct Coupling Transmission Independent electrical cabinet with: Ammeter Voltmeter Start/Stop Button Emergency stop Engine Thermal Protection Dimensions (L × W × H): 800 × 450 × 670 mm Net weight: 95 kg Gross weight: 110 kg Condition: New Auction-ID: A1-50704-409

The Kistler maXYmos NC is an NC-controlled joining and monitoring system for quality assurance in assembly and joining processes. The system consists of a maXYmos monitor (type 5847/5877AZ000) for process monitoring and an electrical NC joining unit (NCFT, model T-13646) with an integrated force transducer and displacement measurement. It is suitable for monitoring and controlling pressing, joining and press-fitting processes in manufacturing and assembly technology. The system is used and shows normal signs of use due to use. All main components are present and complete. Scope of delivery:1 maXYmos NC monitor (type 5847)1 NCFT NCFT joining unit (model T-13646, weight 5.8 kg)1 orange motor cable (coiled, approx. 10–15 m)1 grey encoder/signal cable (coiled)1 green encoder cable (coiled)1 white cable (coiled)1 red cable (coiled)Other connection cables and wires Type monitor: maXYmos NC t ...

Part of the production line, power 900 W Auction-ID: A1-50679-3

Industrial liquid chiller (water chiller) industrial chiller's main purpose is to lower and precisely maintain the temperature of water or a glycol/water mixture, which is then circulated through industrial machinery or processes to prevent overheating. Machinery & Process Cooling: Used to cool equipment in plastics manufacturing (injection molding, extrusion, blow molding), laser cutting, welding machines, CNC spindles, and chemical reactors. Auction-ID: A7-50717-16

2x Lattice Box Stainless SteelStainless Steel Lattice Box with Runners, Lid and Front Half Foldable The boxes come from the pharmaceutical industry. It is a completely closed welded construction. This makes the boxes submersible and also suitable for the food industry. non-stackableLattice Box, Type: 650Manufacturer: LKE Schneider Leichtbau GmbHMaterial: Stainless Steel 1.4301Bars: Tube D= 22 mmLoad capacity: 1,000 kgSize: 1,245 x 845 x 890 mmWeight: approx. 76 kg per piece Auction-ID: A7-50729-140

Stencil printer (spare parts dispenser)Size: 1500 x 2200 x 2000 mm (WxDxH) Auction-ID: A7-50729-136

Manufacturer: RittalSeries: TopThermType: SK 3387.540Designation: Enclosure Cooling UnitYear of construction: 25.09.2019Origin: Made in ItalyTechnical data:Nominal voltage: 400 V / 50 Hz / 3~Nominal current: 3.9 AStarting current: 17.0 AFuse: 6.3 – 10 ARefrigerant: R134aFilling quantity: 1,800 gTotal cooling capacity (DIN EN 14511):L35 L35: approx. 3.8 kWSensitive cooling capacity: approx. 3.47 kWEER: 2.38Operating temperature: +10 °C to +55 °CDegree of protection: Internal circuit: IP54External circuit: IP34Weight: 77 kg Auction-ID: A7-50729-82

Jenoptik JOL-D5.1-BP disk laser with SCANLAB SCANgine 14 scanner head, control cabinet with control and power electronics, Delta Elektronika power supplies, camera and optics unit, safety module, control panel with emergency stop, pilot laser, diode laser insertion, corrugated tube with cable set. Wavelength 1064 nm, 5 W CW / 35 kW peak, pilot laser 650 nm, scanner SCANgine 14, mains 230 V, max. 800 VA Auction-ID: A7-50729-109