delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,265)

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 520 mm: 230 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,1 x 0,9 x 1,15 mdomestic equipments• Digital depth gauge• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm: 375 U/min.working area: 180 - 1000 mmengine output: 0,7 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was created with ModulMWS - the soft ...

bore capacity in steel (diameter): 25 mmthroat: 170 mmbore stroke: 50 mm: 16 mmspindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min: 280 mm: 155 mmtable surface area: 500 x 180 mmconnected load frequency: 230 Vmax. distance between table and spindle-nose: max. 320 mmtotal power requirement: 0,8 kWweight of the machine ca.: 150 Kgdimensions of the machine ca.: 670 x 550 x 910 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 180 mmbore stroke: 85 mmspindle taper: MK 2 spindle diameter: 47 mmspindle turning speed range: 320 - 3300 U/min: 230 mm: 100 mmtable surface area: 420 x 155 mmconnected load frequency: 230 V: 900 x 600 x 300 cmtotal power requirement: 0,75 kWweight of the machine ca.: 8o Kgdimensions: 0,7 x 0,7 x 0,8 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 115 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 350 mm: 130 mmtable surface area: 590 x 190 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmfeed: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,7 x 0,95 x 1,75 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 metrisch: 400 U/min.0: 6 - 8 barworking area: max. 1100 mmweight: 15 kgdimensions: 700 x 280 x 200 mmPneumatic tapping machineType with an adjustable angle, horizontal tapping possiblePneumatic tapping machines for M3 - M12 threads, angle adjustable.8 pcs. quick-change chuck with slipping clutch.Documentation in English!Optional: clamping table with grooves type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

iğ sayısı: 4 Çelikte delik kapasitesi (çap): 23 mmDelik stroku: 150 mmtoplam güç gereksinimi: kWMakinenin ağırlığı ca.: tMakinenin boyutları ca.: m

x-travel: 750 mmy-travel: 560 mmz-travel: 600 mmControl: HEIDENHAIN iTNC 530 total power requirement: 70 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mD E C K E L M A H O (Germany)Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision workModel DMC 75 V LINEAR Year 2005_______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mmTable clamping size 950 x 650 mmMax. Table load 1.000 kgMax. height of workpiece 60 ...

thread dia.: M3 - M16 mm: max. 187 U/min.working area: 180 - 1000 mmengine output: 0,7 kWweight: 22 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmControl: SIEMENS 840 C total power requirement: 12 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M16 metrisch: 312 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgdimensions: 700 x 600 x 200 mmElectric tapping machines for M3 - M16 threads,Angle adjustable.Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 380 mmz-travel: 300 mmControl: FANUC total power requirement: 12 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 800 mmz-travel: 700 mmControl: HEIDENHAIN iTNC 530 total power requirement: 50 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-Hareketi: 630 mmY-Hareketi: 550 mmZ-Seyahati: 500 mmtoplam güç gereksinimi: 10 kWMakinenin ağırlığı ca.: TMakinenin boyutları ca.: M

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min: 500 mm: 230 mmtable surface area: 720 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,1 x 0,9 x 1,2 mdomestic equipments• Digital display• Digital depth gauge for quill• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 feed range - spindle: 0 mm/Uspindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was crea ...

Çelikte delik kapasitesi (çap): 10 mmBoğaz: 0 mmDelik stroku: mmToplam güç gereksinimi: kWMakinenin ağırlığı ca.: tMakinenin boyutları ca.: m

honing diameter: 110 mmstroke: 150 mmthroat: mmtotal power requirement: 2,5 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 25 mmbore depth: 1000 mmswing diameter: mmtotal power requirement: 25 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: mT B T (Germany)CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mmTable clamping area 1,200 x 2,000 mmDrilling capacity in solid material, approx. 4 - 25 mmTool holder taper HSK 50Spindle speeds 1.260 - 15,000 rpmFeed rates / quickfe ...

x-travel: 500 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: 12 kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 510 mmtotal power requirement: 60 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kontrol: Siemens Sinumerik 840 D Seyahat: X ekseni: 800 mm Y ekseni: 1.050 mm Z ekseni: 850 mm Montaj: HSK 100 Takım magazini: 60 kat Dişli mili: 8.000 rpm İş parçası çapı maks.: 900 mm iş parçası yüksekliği: 1.450 mm Konveyör Alçak yataklı filtreli soğutma sıvısı cihazı Mil üzerinden soğutma sıvısı beslemesi 2 katlı palet değiştirici 3-Boyutlu Prob (Renishaw) Blum Lazer Aspiratör

teklif 25094 Özellikler: - Çelik delme kapasitesi ST 60 50 mm - Çelik delme kapasitesi ST 60 60 mm - Delme mili tutucusu MK 4 - Delme mili stroku 225 mm - Delme mili hızları kademesiz olarak ayarlanabilir 35 – 950 rpm - Sağ - Saat yönünün tersine dönüş - 3 besleme 0.1; 0,16; 0,25 mm/dev - Projeksiyon 360 mm matkap milinden tabla / taban plakasına olan mesafe 740 / 1220 mm - 2 T yuvalı masa 700 x 590 mm El krankı ile raf üzerinden yüksekliği ayarlanabilir - Sürücü 400 V / 2,2 / 4,0 kW - Alan gereksinimi yakl. G 700 x Y 2150 x D 1150 mm - Ağırlık yakl. 850 kg - ile: - Acil durdurma butonu -Aydınlatma - Soğutma sıvısı cihaz�

spindle diameter: 125 mmx-travel: 1.500 mmy-travel: 1.250 mmz-travel: 1.000 mmw-travel: 550 mmtable surface area: 1.000 x 1.250 mmworkpiece weight: 6.000 kgquill stroke: 550 mmtool taper: ISO 50 number of spindle speeds: 5-3.700 U/min.max. torque: 2012 Nmfeed speeds: 1-6000 (x-Achse) mm/minfeed speeds: 1-6000 (y-Achse) mm/minfeed speeds: 1-6000 (z-Achse) mm/minrapid traverse x/y/z: 15/ 15/ 15 m/mindimensions of the machine ca.: 7,51 x 5,07 x 3,33 m: 63 kVAEquipment/ Accessories:- CNC control Siemens 840 D - 60 ATC- Coolant system with high-pressure pump 30 l/min.- 20 bar- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Özellikler: Üretici firma: 3M ESPE Türü: Lav CNC 500 Kontrol: Beckhoff Yapım Yılı: 2008 Basınçlı hava: 6,5 bar Anma gücü: 1 kW Nominal şebeke frekansı: 50/60 Hz Ağırlık Ağırlık: 620 kg Koşul Durum: Kullanılmış Fonksiyonel: Test edilmiş ve tamamen işlevsel

Kontrol: Heidenhain iTNC530 Seyahat: X ekseni: 4.000 mm Y ekseni: 1.200 mm Z ekseni: 1.300 mm Yatay A ekseni: 0-135 ° B ekseni: +-106° NC döner tabla: 50 rpm ile 1.250 mm Arıza devresi Ø: 1.600 mm, Tork sürücülü 50 rpm Takım magazini: 60 kat Takım tutucu: HSK 100 Motor mili: 15.000 rpm / 90kW Aksesuar -lar -Konveyör - 5 eksenli eş zamanlı paket - 2023'teki son büyük bakım -Emme - IKZ 70 çubuğu - Telsizli 3D prob - Takım kırılma tespiti - HR 550 FS telsizli el çarkı