delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,210)

spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...

çelikte delik kapasitesi (çap): 28 mmboğaz: 200 mmdelik stroku: 105 mmtabla yüzey alanı: 360x340 mmMil/tabla mesafesi maks.: 540 mmdönüş hızı aralığı - kademesiz: 120-3000 U/daktoplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: tmakinenin boyutları yaklaşık: mBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

x-travel: 1800 mmy-travel: 520 mmz-travel: 520 mmcontrol: iTNC 426-M spindle speed:: 8000 UpMrapid travel x/y/z: 30 m/mintool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nmweight of the machine ca.: tdimensions of the machine ca.: mMachine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode  ...

x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: feed speeds: 20.000 mm/minrapid traverse: 30 m/minFeed force: 5 kNtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,0 x 3,0 x 2,8 mChip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: XYZ Coolant-Air-Blast- ...

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1000 x 560 mmspindle taper: HSK 63 A spindle turning speed - stepless: 20 - 16.000 U/minspindle power: 15 kWmax. torque on the spindle: 9 Nmfeeds x/y/z -stepless: 1 - 30.000 mm/minrapid traverse: 35 m/minfeed power: 8000 NATC: 30 Stationencontrol: HEIDENHAIN, TNC 430 total power requirement: 32 kVAweight of the machine ca.: 7,2 tdimensions of machine L x W x H: 2,75 x 2,30 x 2,95 mAccessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Çelikte delik kapasitesi (çap): mmarm uzunluğu: mmiş parçası yüksekliği maks.: mmtoplam güç gereksinimi: kW makine ağırlığı ca.: tmakine boyutları ca.: mBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Üretici: Elumatec Ürün Kodu: SBZ 122/31 Üretim Yılı: 2007 Makine Tipi : Çubuk İşleme Merkezi İşleme Uzunluğu: Çubuk destekli 3750 mm / 3500 mm desteksiz Eksen Hareketi: X = 350 mm, Y = 280 mm, Z = 300 mm Hız: 30 m/dak konumlandırma hızı (tüm eksenler) Doğruluk: ±0,1 mm Mil: 6 kW, 21.000 rpm, HSK F63 Takım İstasyonları: 5 Takım Çapı: 200 mm (manuel), 92 mm (otomatik) Testere Bıçağı Çapı: 500 mm Hava Tüketimi: Döngü başına ~50 l Basınçlı Hava Gereksinimi: >7 bar Güç Kaynağı: 400 V, 3 fazlı Daha fazlasını burada bulabilirsiniz - / Bize şu adresten ulaşın: -

x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Üretici: LINEMATIC Ürün Kodu: LM34/705 Üretim Yılı: 2004 Güç: 14 kW Gerilim: 400 V, 20 A, 50 Hz Faz: 3 fazlı + Nötr + Koruyucu Topraklama CE sertifikalı Daha fazlasını burada bulabilirsiniz - / Bize şu adresten ulaşın: -

Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Çelikte delik kapasitesi (çap): 40 mmBoğaz: 380 mmDelik stroku: 160 mm: 4 hız: 60 - 1250 U/basılabilir boyut: - mmToplam güç gereksinimi: 3,3 kWağırlık: 900 kgboyutlar: - mmÖzellikler:-Sağlam tasarıma sahip dişli delme makinesi-Kolona monte delme masası-Sağa/sola dönüş-Besleme-Soğutma sistemiBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-hareketi: 760 mmy-hareketi: 610 mmz-hareketi: 610 mmkontrol: Heidenhain 530 toplam güç gereksinimi: kW makine ağırlığı yaklaşık: 6700 kg makine boyutları yaklaşık: mBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Delme çapı: 18 minDelme kapasitesi çap maks.: 15 mmDelik derinliği: 90 mmBoğaz: 215 mmMil: BIS 360 mmMil: 560 mmTabla plakası: 350 x 290 mmSütun çapı: 75 mmToplam yükseklik: maks. 1050 mmağırlık: yaklaşık 100 kgİğ dönüş hızı - kademesiz: 100 - 1800 U/dakMotor hızları:: 700 / 1400 U/dakKutup değiştirme motoruBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

boğaz: 180 mmtüy stroku: 80 mmsürekli kapasite: 20 mil konikliği: MK 2 tabla boyutu: 280 x 245 mmmakinenin yüksekliği: yaklaşık 1000 msütun çapı: 73 mmmil mesafesi /tabla: maks. 425 mmboyutlar: yaklaşık 615 x 330 x 1015 mmağırlık: yaklaşık 60 kgdahil. yardımcısı HM Müller HT100PTBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...

2001 Hurco VMX40 Teknik veri: - Ultimax 4 kontrolü - Ağ kartı - DXF yazılımı - Takım değiştirici 24 yer - SK40 tutucu - İş mili hızı 10-10.000 rpm - Talaş konveyörü - Çalışma süresi 5279 Seyahat: - X ekseni 1.020 mm - Y ekseni 510 mm - Z ekseni 610 mm Daha fazlasını burada bulabilirsiniz - / Bize ulaşın -