delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,196)

bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x hareketi: 700 mmy hareketi: 420 mmz hareketi: 610 mmtabla boyutu: 1260 x 490 mmiş mili konikliği: HSK E50 iş mili dönüş hızı aralığı: 36000 U/daktakım değiştirme ünitesi: 42 makine ağırlığı yaklaşık: 5 tHEIDENHAIN TNC430 spindlewww.marcels-maschinen.ch Soğutma sıvısı Bu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

çelikte delik kapasitesi (çap): 28 mmboğaz: 200 mmdelik stroku: 105 mmtabla yüzey alanı: 360x340 mmMil/tabla mesafesi maks.: 540 mmdönüş hızı aralığı - kademesiz: 120-3000 U/daktoplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: tmakinenin boyutları yaklaşık: mBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode  ...

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Üretici: LINEMATIC Ürün Kodu: LM34/705 Üretim Yılı: 2004 Güç: 14 kW Gerilim: 400 V, 20 A, 50 Hz Faz: 3 fazlı + Nötr + Koruyucu Topraklama CE sertifikalı Daha fazlasını burada bulabilirsiniz - / Bize şu adresten ulaşın: -

Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delme çapı: 18 minDelme kapasitesi çap maks.: 15 mmDelik derinliği: 90 mmBoğaz: 215 mmMil: BIS 360 mmMil: 560 mmTabla plakası: 350 x 290 mmSütun çapı: 75 mmToplam yükseklik: maks. 1050 mmağırlık: yaklaşık 100 kgİğ dönüş hızı - kademesiz: 100 - 1800 U/dakMotor hızları:: 700 / 1400 U/dakKutup değiştirme motoruBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

boğaz: 180 mmtüy stroku: 80 mmsürekli kapasite: 20 mil konikliği: MK 2 tabla boyutu: 280 x 245 mmmakinenin yüksekliği: yaklaşık 1000 msütun çapı: 73 mmmil mesafesi /tabla: maks. 425 mmboyutlar: yaklaşık 615 x 330 x 1015 mmağırlık: yaklaşık 60 kgdahil. yardımcısı HM Müller HT100PTBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...

2001 Hurco VMX40 Teknik veri: - Ultimax 4 kontrolü - Ağ kartı - DXF yazılımı - Takım değiştirici 24 yer - SK40 tutucu - İş mili hızı 10-10.000 rpm - Talaş konveyörü - Çalışma süresi 5279 Seyahat: - X ekseni 1.020 mm - Y ekseni 510 mm - Z ekseni 610 mm Daha fazlasını burada bulabilirsiniz - / Bize ulaşın -