
Häner HCM500R+B for excavators and wheel loaders without mount
Açık artırmaDoğrulanmış satıcı
Teklif¹ KDV hariç
Doğrudan satıcıya
1.400 €
1 / 1
Teknik veriler
· ID 170465922Makineler
- Teklif¹ KDV hariç
- 1.400 € (netto)
- Başlangıç fiyatı
- 1.400 € (KDV hariç)
- Açık artırma bitişi
- Açık artırmanın bitiş tarihi: 27.11.2026 – 15:16 CET.
- Konum
- 57462 Olpe
¹ Son bildirilen durum; müzayede evinin bilgileri esastır.
Identifikation
Kalem numarası7498b47e-b01f-4572-9eff-9452af96d12d
Technik
Adet1
Açıklama
HÄNER HCM500 Concrete Mixing Bucket for Wheel Loaders and Excavators
New device
Working width: 1970 mm
Height: 900 mm
Depth: 930 mm
Nominal capacity: 500 l
Maximum capacity: 550 l
Curb weight: 800 kg
Concrete weight: 1200 kg
Total weight: 2000 kg
Required oil volume: 60-150 l/min
Maximum pressure range: 240 bar
Open/Close Hose Connectors: 1/2 inch
Hose Fittings Turn: 1/2 inch
Drive Type Mixing Shaft: Chain
Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device.
Our HCM500 concrete mixing bucket has the following data and specifications:
– Side panels made of 12 mm S355
- Base body made of 10 mm S355
– Mixer screw rings made of wear-resistant HB500; thickness 15 mm
– Mixer shaft made of C45 solid steel; diameter 65 mm
- Cutting edge made of 20mm HB400
– Roller bearings with free-moving rollers
– central hydraulic drain port piston rod protection
– high-quality hydraulic motor
– Solenoid valve with 12V electrical kit for drain opening
– galvanized mesh opening with teeth to tear
open bags
– Interchangeable system for excavators and wheel loaders
– Rubber drain hose with guide rod
– CE certificate with operating and maintenance instructions
Application note: When using the wheel loader mount, the excavator mount must be unscrewed beforehand.
Auction-ID: A1-52495-1330
New device
Working width: 1970 mm
Height: 900 mm
Depth: 930 mm
Nominal capacity: 500 l
Maximum capacity: 550 l
Curb weight: 800 kg
Concrete weight: 1200 kg
Total weight: 2000 kg
Required oil volume: 60-150 l/min
Maximum pressure range: 240 bar
Open/Close Hose Connectors: 1/2 inch
Hose Fittings Turn: 1/2 inch
Drive Type Mixing Shaft: Chain
Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device.
Our HCM500 concrete mixing bucket has the following data and specifications:
– Side panels made of 12 mm S355
- Base body made of 10 mm S355
– Mixer screw rings made of wear-resistant HB500; thickness 15 mm
– Mixer shaft made of C45 solid steel; diameter 65 mm
- Cutting edge made of 20mm HB400
– Roller bearings with free-moving rollers
– central hydraulic drain port piston rod protection
– high-quality hydraulic motor
– Solenoid valve with 12V electrical kit for drain opening
– galvanized mesh opening with teeth to tear
open bags
– Interchangeable system for excavators and wheel loaders
– Rubber drain hose with guide rod
– CE certificate with operating and maintenance instructions
Application note: When using the wheel loader mount, the excavator mount must be unscrewed beforehand.
Auction-ID: A1-52495-1330



