
2008 - VAT - 65046-PACG-AFI1, A-899024 - Vacuum pendulum control valve DN200 ISO-F with integrated p
Açık artırmaDoğrulanmış satıcı
Teklif¹ KDV hariç
Doğrudan satıcıya
410 €
1 / 1
Teknik veriler
· ID 170442030Makineler
- Teklif¹ KDV hariç
- 410 € (netto)
- Başlangıç fiyatı
- 410 € (KDV hariç)
- Açık artırma bitişi
- Açık artırmanın bitiş tarihi: 02.12.2026 – 11:03 CET.
- Konum
- 01189 Dresden
¹ Son bildirilen durum; müzayede evinin bilgileri esastır.
Identifikation
Kalem numarası51e715e4-ef3f-4f92-8888-9537de175ed7
Technik
Adet1
Açıklama
Valve Series: VAT 65.0 Spherical Valve Control System (Control & Globe Valve)
Nominal diameter: DN200 (8\")
Flange: ISO-F on both sides, 12x M10
Housing/plate: Aluminium EN AW-6082
Seals: FKM (Viton)
Pressure range: 1x10-8mbar to 1.2bar (abs)
Leak rate housing/valve seat: 1x10-9mbar·l/s
Max. differential pressure at the plate: 1,200mbar
Max. differential pressure when opening: 5mbar
Conductivity (molecular flow): 12,000l/s
Min. adjustable conductivity: 10l/s
Throttle time: 0.9s
Type. Closing/opening time: 3s/4s
Compressed air: 4-7bar
Cycles to first service: 1 million (closed) / 200,000 (close/open)
Max. housing temperature: 120°C
Drive: Stepper motor with encoder, drive type 241244 (Lot No. 20150, Barrel No. 32)
Integrated pressure regulator: with sensor supply (PLC, ±15V DC) and Power Failure Option (PFO), RS232 interface, 1 sensor input (0-10V)
Power supply: 24V DC ±10%, ESC + motor max. 50W, PFO max. 10W, PLC max. 36W
Connectors: POWER D-Sub 9-pin (male), SENSOR D-Sub 15-pin (female), INTERFACE D-Sub 25-pin (female), SERVICE D-Sub 15-pin HD (female), ground bolt, 4-digit display
Valve heating: black insulating/heating jacket with VAT connection box 'BS heater 213012 Ind.B', silicone connection cable with flat plug sleeves
CE Marking (08)
Weight valve according to manufacturer: approx. 22kg (without heating jacket)
Accessories:
Mounted insulating/heating jacket with heater connection box and connection cable (flat sockets, cable label 'Pendlum Valve Heater'), pneumatic right-angle plug-in fitting on the drive, flange screws in the flange holes.
Auction-ID: A7-52036-63
Nominal diameter: DN200 (8\")
Flange: ISO-F on both sides, 12x M10
Housing/plate: Aluminium EN AW-6082
Seals: FKM (Viton)
Pressure range: 1x10-8mbar to 1.2bar (abs)
Leak rate housing/valve seat: 1x10-9mbar·l/s
Max. differential pressure at the plate: 1,200mbar
Max. differential pressure when opening: 5mbar
Conductivity (molecular flow): 12,000l/s
Min. adjustable conductivity: 10l/s
Throttle time: 0.9s
Type. Closing/opening time: 3s/4s
Compressed air: 4-7bar
Cycles to first service: 1 million (closed) / 200,000 (close/open)
Max. housing temperature: 120°C
Drive: Stepper motor with encoder, drive type 241244 (Lot No. 20150, Barrel No. 32)
Integrated pressure regulator: with sensor supply (PLC, ±15V DC) and Power Failure Option (PFO), RS232 interface, 1 sensor input (0-10V)
Power supply: 24V DC ±10%, ESC + motor max. 50W, PFO max. 10W, PLC max. 36W
Connectors: POWER D-Sub 9-pin (male), SENSOR D-Sub 15-pin (female), INTERFACE D-Sub 25-pin (female), SERVICE D-Sub 15-pin HD (female), ground bolt, 4-digit display
Valve heating: black insulating/heating jacket with VAT connection box 'BS heater 213012 Ind.B', silicone connection cable with flat plug sleeves
CE Marking (08)
Weight valve according to manufacturer: approx. 22kg (without heating jacket)
Accessories:
Mounted insulating/heating jacket with heater connection box and connection cable (flat sockets, cable label 'Pendlum Valve Heater'), pneumatic right-angle plug-in fitting on the drive, flange screws in the flange holes.
Auction-ID: A7-52036-63



