ahşap için presler kullanılmış satılık (325)

1- Bir adet döşeme kombinasyonu, Döndürme ve boşaltma 2- BTF Çoklu Foiler 3- Çoklu Pin Sistemi Faydalı alan 1330x2630 mm Maksimum tahta boyutu 1250x2550 mm Min folyo genişliği 1400 mm

Kapasite: 3 ton/saat Motor gücü 200Kw Kalıp çapı 1000 mm Silindir sayısı 5

Bu ORMA NPC/DIGIT 6/95 30/13 AS-BO, 2023 yılında üretilmiştir. Kullanılmış bir sıcak pres, 3000x1300 mm'lik bir pres alanına, altı silindire ve maksimum 400 mm'lik bir pres açıklığına sahiptir. Toplam 90 ton basınç sağlar ve 120 ÂC'ye kadar termo-yağ ısıtma için 18 kW'lık bir elektro-ısıtıcı içerir. Bu ORMA NPC/DIGIT 6/95 30/13 AS-BO kaplama presini satın alma fırsatını değerlendirin. Bu makine hakkında daha fazla bilgi için bizimle iletişime geçin.

Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not sellable in Italy. Auction-ID: A7-41268-803

The press is ideal for recycling wood chips, sawdust or similar biomass residues and impresses with its robust design, high pressing performance and reliable technology. Technical data (excerpt): • Manufacturer: RUF GmbH & Co. KG • Type: RB 1500 • Year of construction: 2019 • Voltage: 400 V • Frequency: 50 Hz • Rated current: 190 A • Degree of protection: IP54 • Control: Siemens SIMATIC HMI • Operating hours: approx. 2,300 h • Total weight: approx. 14,000 kg Scope of delivery: • Briquetting press RUF RB 1500 • AL-KO mobile dust collector • Storage tank / silo • Control cabinet and complete control system • Hydraulic power unit and drive units • Documentation (if available) Dismantling & loading: • Dismantling and loading can be taken over at an additional cost • In the case of self-dismantling, the dismantling of the control syste ...

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

Output table with mechanized rollers length 2400 x height 1034 mm, input table Max. floor opening: 200mm Total pressure [kg/cm²] 2.5 Total pressure [tonnes] 90 Auction-ID: A1-40971-6

Auction-ID: A1-41565-20

Motor: Valtaro Motori, 2.2 kW, 230/400V, IP55 Hydraulic pump: Bosch Rexroth (label: R932010893) Year of construction: Probably 2015 (according to pump) Auction-ID: A1-41565-27

Function: Designed for assembly and squaring of box frames Clamping system: Precise and secure assembly Capacity: Suitable for different cabinet formats Structure: Robust steel frame ensuring stability and durability Additional features: Adjustable stops and guides for flexible use depending on the task Auction-ID: A1-41441-409

Machine No. 0-306-99-0739, press length approx. 280 - 2500 mm, press height approx. 350 - 1400 mm, press depth max. approx. 800 mm, working height approx. 300 mm, press force approx. 5 - 25 kN (The article is in condition as existing and untested. The dismantling and loading costs are binding and the item is sold without contents/material!) Auction-ID: A7-41445-21

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-41245-317

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-41245-198

Heavy series pellet mill, 380 volt power supply, 100 kg hourly output NEVER USED Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-41244-137

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-41246-317

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-41246-198

4-sided clamp with pneumatic pistons Auction-ID: A7-39846-7

Machine No. 100-700/9, press length approx. 2450 mm, press height approx. 1350 mm, press width approx. 600 mm (The article is in condition as existing and unchecked. The dismantling and loading costs are binding! The item is sold without content / material!) Auction-ID: A7-40945-57

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3600x1650x2150 mmWeight: 6500 kgTotal power requirement: 52 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8500x1800x2150 mmWeight: 6000 kgTotal power requirement: 10 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4500x1500x2000 mmWeight: 6500 kgTotal power requirement: 22,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3480x1500x2000 mmWeight: 5500 kgTotal power requirement: 22,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.