stephan et ve balık işleme makineleri kullanılmış satılık

If you have any questions: 01718367957

Stephan micro cutting and vacuum mixing plant, consisting of: Stephan Mikroschneider, machine type: MCH 20/VM, machine number: 726.107.02, year of construction: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixing plants, machine type: VM/MC 450/450/20, machine number: 726.107, year of construction: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume tank: 485 liters, permissible operating pressure container: -1 / 0.3 bar, permissible operating temperature container: 95 °C, Volume jacket: 38 liters, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of construction: 2000, Q: 30 m³/h, overall dimensions mixing plant: 4900 mm x 1950 mm x 3400 mm, incl. s/s platform with stairs, di ...

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

Stephan Feinstzerzerer Type: MCH-D 60 Drive: 49 KW performance in the hour depending on the desired fineness of the starting product. From 2000 to 3500 Kg/hour This machine is ready for operation, as from the customer. With used but outdated cutting sets

The manufacturer is probably the company Stephan.Der of heated tray fits under a Stephen...

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Stephan MCHD 30-II micro cutter

Cutting sets and moving in snails Suitable for Stephan Machines

Used machine with 110 KW as a retro-fit machine We are also happy to work on your Stephan machine as in the pictures in the appendix as retro-fit

Stephan UMB40 Universal Machine with two speeds 1420/2870 rpm Use of knives as well as additional work Machine tiltable for removing the processed medium Stainless steel bowl Power lever and engine cover should be repainted

Stephan MCV12 Microcut, continuous cutter, colloid mill, koial mill, ultra-fine shredder Voltage: 400V Speed: 2900rpm Power: 8800W Stainless steel funnel Spout with DN50 milk thread, thus the possibility of retrofitting a circulation device for product circulation neat condition smooth running should be thoroughly cleaned before use Video about test run available

Stephan UM5 Universal Machine Machine is in good condition according to its age two speeds + pulse button 400V Removable boiler with knife insert The plastic wings in the lid and the knife insert have probably run into each other and scratched more often, but this does not affect the function Video about test run available

Stephan UM25 Universal Machine two speeds 1440/2900 rpm Knife insert (blades are to be sharpened) Stainless steel boiler with double jacket (electrically heated, but without function) Machine tiltable for removing the processed medium Machine in very good condition Video about test run available

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches Machine must be thoroughly cleaned before use. the frame and the engine cover should possibly get a new paint neat and smooth running Viedo available via test run

Stephan UMB25 Universal machine used with two speeds incl. knife insert Machine tiltable for removing the processed medium Bowl made of stainless steel, 25 litres volume for up to 18 litres batches The machine is in very good condition, but must still be thoroughly cleaned before use. neat and smooth running Viedo available via test run

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Intensive kneader, Stephan, type TK 160

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.

Stephan UM5 Universal Machine Machine is in good condition according to its age Two speeds + pulse button 400V Removable boiler with knife insert Plastic sash in the lid at the tip worn, this does not affect the function Video about test run available

Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm

Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Batch size 2-7 Tabletop device: Bowl and lid made of stainless steel, polished inside, Knife holder polished Bowl with double jacket and temperature probe Polyamide transport sash for manual operation Control panel Vacuum-resistant design incl. pressure gauge and connections Membrane keypad for two speeds (1,420 and 2,810 rpm) Product temperature display and time selection Separate control box, drive motor with brake Application: Confectionery and bakery products, laboratories, cosmetic and pharmaceutical products

Universal machine Manufacturer: Stephan Type UMC 12 Capacity 12 litres Tool Polycarbonate lid Bowl made of V2A, ceramic-blasted, cool/heat double jacket Polyamide transport sash Control membrane keyboard 2011 in the equipment cabinet Knife holder with 2 Kullen knives Temperature sensor PT 100 Auxiliary contactor shutdown main motor when temperature reaches Operating instructions available

Stephan PrimeCut12 Universal Machine Two speeds: 1440/2880rpm Stainless steel kettle removable transparent plastic lid Crank for actuating the mixing blade Machine has considerable signs of use, the lid is covered with hairline cracks due to cleaning in the dishwasher, which do not impair the function, but are unsightly. Just like the stirring blade in the lid. The machine is equipped with a knife insert and a mixing insert and should always be thoroughly cleaned before use. Video about the test run available on YouTube

Stephan UM44 Universal Machine two speeds 1450/2900rpm with knife insert and meat grinder Tiltable for removing the processed medium neat condition, should still be thoroughly cleaned before use Video about test run available

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 210 kg,

Height=1.19 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 170 kg,

Height=1.29 m, Overall length= 0.55 m, Overall width= 0.8 m, Net weight= 230 kg,

Height=0.7 m, Overall length= 0.35 m, Overall width= 0.5 m,

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 205 kg,

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

Height=1.64 m, Overall length= 0.99 m, Overall width= 0.87 m, Net weight= 303 kg,

Height=1.6 m, Overall length= 0.7 m, Overall width= 0.9 m, Net weight= 217 kg,

Height=1.23 m, Overall length= 0.35 m, Overall width= 0.55 m, Net weight= 60 kg,

Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual

Single envelope tank 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Capacity of the tank : 12 liters , Charge capacity: 2 to 8 liters max

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Stephan UM44-S Universal Machine two speeds, 1410 + 2820 rpm + engine brake! Membrane keyboard with impulse switch with knife insert Machine tiltable for removing the processed medium Machine is in good condition and runs neatly and smoothly at both speeds, but should be thoroughly cleaned before use Video about test run available

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

Stephan cheese processing machine, type: TC 300, machine number: 716.815, number: 2878172, year of construction: 1990, 380 V, 3 Ph, 50 Hz, 67 kW, 123 A, dimensions: 3500 mm x 1800 mm x 2400 mm. Including s/s switch cabinet, dimensions: 2350 mm x 700 mm x 2200 mm.

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Mesa 900 is specifically designed to efficiently cut the cheeks and tongues of fish heads. It is suitable for processing all mid-sized fish heads without special adjustments. The machine is equipped with two separate tubs, one for collecting offal and the other for the already processed heads. This item was settled up for range 300 – 500 g cod heads weights but could be easily reset back for 600 – 1300 g weight range, on demand.

Totally overhauled Baader 189 Filleting machine for cod and whitefish This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

Filleting machine for salmon and trout in good working condition, overhauled in Denmark in 2017 This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably ...

Baader 142 gutting machine Condition: Overhauled The Baader 142 gutting machine is specifically designed for gutting salmon, sea trout, and coho within a weight range of 2 – 7 kg, whether with the head on or head off. The fish to be processed is manually loaded onto the machine. With the assistance of a powerful tail clip, the fish is gently transported. The machine utilizes electronic measurements and calculations to determine the precise position for making cuts on the fish. It excels at performing accurate mechanical princess cuts. The integrated suction devices and throat cutting tools effectively collect and remove the guts. The throat is separated from the inside of the head while ensuring that the gills remain intact on the fish. We provide all necessary units for operating the Baader 142, including the vacuum pump, cyclone, and inspection belts. Capacity: Able to pr ...

Kronborg Mark 5 Fish Gutting Machine is specifically designed for gutting a variety of fish, including cod, saithe, haddock, whiting, hake, and even river fish like carp. It is suitable for use on trawlers and in land-based factories. The fish is continuously placed in the feeding chamber, where a conveyor belt with catches transports them through a positional system of guiding plates to the gutting chamber. A rotating knife cuts the fish as required. After the cutting process, the fish passes through a rotating nylon brush and water sprays, effectively removing the remaining entrails. The gutted fish is then directed towards the outlet end for further transportation. Due to its compact size and lightweight design, Kronborg mark 5 is suitable for use on coastal fleet vessels and shore plants. Status: Overhauled Capacity: Able to process 40 fish per minute Size range: Fish  ...

Baader 200 Fish Filleting Machine is overhauled, specifically designed for producing fillets of salmon, trout, and similar fish species. It is well known for its high processing capacity, precision, and reliability. This machine is used in fish processing plants around the world to automate the filleting process, improving efficiency and reducing labor costs. Manufactured by Baader, a well-known German company specializing in fish processing equipment. It efficiently processes both gutted and headed fish, with the option to include or exclude the collar bone. The Fish Filleting Machine ensures that the fish is fed through the tools in a manner that minimizes stress, and guaranteeing a smooth surface on the fillets. In the case of salmon, the machine can produce fillets with or without the collar bone, and with suitable adjustments, it can also process salmon sides while retain ...

Baader 187 Fish Filleting Machine Condition: Refurbished Baader 187 Fish Filleting Machine is overhauled filleting machine presented here is specifically designed for processing small whitefish within a size range of 30 to 55 cm (12″ – 22″). This compact and efficient filleting system offers a streamlined solution for handling these smaller fish. The machine’s speed is adjustable, allowing for a range of 25 to 40 fish per minute, which can be customized to match the operator’s skill level. The production capacity of fillets per hour depends on the average fish size. Lower image demonstrates the exceptional cutting results achieved by the BAADER 187, producing clean fillets with intact belly flaps and minimal wastage. Technical Specifications: Working Range: Small whitefish from 30 to 55 cm Capacity: 25-40 fish per minute Power Consumption: 1.5 kW Water Consump ...

Baader 184 is fish filleting machine for processing whitefish. Condition: Refurbished This extensively overhauled machine is specially designed for filleting gutted and headed cod, saithe, and haddock within a size range of 30 to 70 cm in total length (equivalent to 0.3 – 2.5 kg, head and gutted weight). Depending on the fish type, it can also handle fish smaller than 70 cm. Baader 184 incorporates the renowned Baader filleting system, known for its high yield and operational reliability. Additionally, it features an integrated skinning unit for added convenience. Key Specifications: Capacity: 24-40 fish per minute Power Consumption: 10 kW Water Consumption: 25 liters per minute Dimensions: 6.15 x 1.70 x 1.50 meters Weight (Net/Gross): 2550/2850 kg

Baader 185 Fish Filleting Machine is a robust and overhauled machine designed for efficient filleting and skinning of various whitefish species. These are large and medium-sized cod, haddock, saithe, and merluza, among others. Condition: Refurbished Similar to the Baader 184, the Baader 185 features larger guidance assemblies and tools, enabling processing of a wider range of fish sizes. The machine’s working range accommodates fish with total lengths ranging from approximately: 50 to 100 cm (equivalent to 1 – 8.5 kg) for cod 50 to 90 cm (1 – 6 kg) for saithe 50 to 80 cm (1 – 4.5 kg) for haddock Additionally, it can handle de-headed fish: cod measuring 40 to 80 cm (0.8 – 6.5 kg) saithe measuring 40 to 75 cm (0.8 – 5.0 kg) haddock measuring 40 to 65 cm (0.8 – 3.5 kg) Equipped with an integrated skinning unit, the Baader 185 Fish Filleting Machine e ...

Baader 188 Fish Filleting Machine Manufacturing Year: 1980 Condition: Refurbished Baader 188 is filleting machine is specifically designed for processing whitefish, and it has undergone a thorough overhaul to ensure optimal performance. It is capable of handling whitefish within a working range of 35 to 70 cm in length, which corresponds to a weight range of approximately 0.4 to 2.5 kg. With a capacity to process 27 fish per minute, Baader 188 Fish Filleting Machine offers efficient and consistent filleting operations. It has a power consumption of 2.2 kW, making it energy-efficient. In terms of water usage, Baader 188 Fish Filleting Machine requires a consumption rate of 20-25 liters per minute, contributing to efficient operation. It has compact dimensions, measuring 3.80 x 0.95 x 1.60 meters, and a net weight of 930 kg. Technical Specifications of Baader 188: Work ...

Condition: Excellent, fully renovated Baader 417 Fish Heading Machine is specifically designed for heading various species of whitefish, including cod, pollack, haddock, and whiting. It can also be utilized for processing perch and similar fish species. Size range: Suitable for fish with an overall length ranging from 30 cm to 70 cm. Baader 417 can handle up to 40 fish per minute. Water consumption: Approximately 5 liters per minute. Power consumption: 1.87 kW. Electricity: 400 V / 50 Hz. Equipped with a plastic elevating belt featuring dividers. Belt width: 150 mm. Height dividers: 80 mm. Elevating height: 1450 mm. Dimensions (Length x Width x Height): 2160 mm x 885 mm x 1860 mm

Mesa 955 Fish Heading Machine Condition: overhauled. Machine designed for cutting lower jaws and cleaning fish heads using water-pressured brushers. It’s ideal for whitefish like cod, haddock, and pollock. The machine’s variable speed drive gives you precise control over fish heads during processing. Plus, it easily integrates into current production lines, enhancing workflow and efficiency.

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained

Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019

Used Baader fish fillet machine type 483. Year of manufacture 1993.

see picutre for hours Find more here - / Contact us at -

Height=1.06 m, Overall length= 0.9 m, Overall width= 0.71 m, Net weight= 75 kg,

Height=1.46 m, Overall length= 0.51 m, Overall width= 0.53 m, Net weight= 208 kg,

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

Net weight= 31 kg,

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

One unused rotary valve from Buhler, opening 275x250mm. Extra cone included, inside flange diameter 235mm.