pressta eisele freze makineleri kullanılmış satılık

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

technically efficient, ready to work – after full service motor power: 2.2 kW cutter diameter: 250 mm milling angle: +45° / 90° / -45° pneumatic profile clamping cooling and lubrication system compressed air preparation station

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Ueberholungsjahr 2016 Baujahr 2010 Saegeblatt Hartmetall 500 mm Antriebsleistung Saegemotor 7,5 KW Drehzahl Saegemotor 2000-38000 min-1 Schnittgeschwindigkeit Saegeblatt 3100-6000 mm/min Saegeblattvorschub stufenlos Einstellbar 0-40 mm/ s Arbeitsbereich 90° max.:460 x 50 mm Nachschublaenge Pneumatisch: Einzelhub:max. 300 mm Servogesteuert: Einzelhub:max. 300 mm Mehrfachhub:max. 9999mm Nachschubgeschw. Servogesteuerte Nachschubeinheit 300 mm/s Druckluftanschluss bauseits 6 bar Gewicht(Saege)ca.: 1000 Kg Abmessungen LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) ca.: 900mm x600mm x800mm Technische Beschreibung Pressta Eisele Profilma 540 Retrofit Pressta Eisele Profilma 540 Retrofit Vollautomatischer Hochleistungs-Saegeautomat fuer NE-Metall und Kunstoffe Die Maschine befindet sich nach abgeschlossenem Retrofit sowohl technisch als auch op ...

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3800 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 2200 operating hours

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Key data: 500 mm, 45 °

The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 4400 operating hours Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Stroke actuation via footswitch Weight: approx. 600 kg

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and display Program control for automatic adjustment of the notch height, angles and notch height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Overhaul year: 2018 Year of construction: 2000-2008 Saw blades Carbide / HSS: 315-360 mm Power saw motor: 15 KW Infinitely variable speed: 15 - 130 min-1 Cutting speed Blade (350 mm): 16.4-142.8 m / min Saw height control adjustable: electronic Bdgmy08nkg Square 90° maximum working range: 100 x 100 mm Work area round 90° max.: 110 mm Supply length 5-970 mm (~ 9999 mm multiple hub) Supply AC servo max speed: 300 mm / s Compressed air connection provided on site: 6 bar Approximate weight saw: 1800 kg Dimensions Lxwxh: 1900mm x 1250mm x 2100mm LxB floor space: 1900 mm x 1250 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. The machine is completed retrofit, both technically and visually in mint condition. A  ...

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: PSU 450 G Country of origin: Germany Saw blade Ø mm: 450 Machine No.: 525/2 Type No.: 47301H0004 Conversion m/min: 10/20 Connection voltage: 400 V / 50Hz Weight approx. kg: 1170

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

CUTTING RANGE . MIN 10MM TO 75MM CUTTING LENGTH . 5-900 SINGLE STROKE -9999 REVERSE CUTTING SPEED. 0 - 40 MM SEC. INFINITELY ADJUSTABLE BACKWARDS 135MM/S MATERIAL FEED SPEED . MAX. 350 MM/S Pwrxaerqe RESILIENCE. MAIN CLAMP 10500N

saw blade diameter: 350 mm cutting diameter: 120 mm capacity 90 degrees: square: 110 x 110 mm capacity 90 degrees: flat: 140 x 110 mm capacity 45 degrees: flat: 140 x 90 mm total power requirement: 2,6 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 0,95 x 1,38 x 1,85 m Accessories: 1 used sawblade 350 mmø, coolant - with hydr. clamping of workpiece and hydr. feed of sawblade - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 mm cutting diameter: bis 90 mm cutting range flat: 120 x 75 mm turning speeds: 40/80 U/min miter cut: 45°/90°/-45° ° weight of the machine ca.: ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

turning speeds: 40/80 U/min : 0025 voltage: 380 V clamping: ja kW miter: ja weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

miter: ja clamping: ja kW mechanical: Senkung weight of the machine ca.: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 - 315 mm cutting diameter: 80 - 102 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 1, 5 x 2 m No. 5230 Cold circular saw with additional gearbox for 4 speeds EISELE VMS II - S - PV ( Typ-Nr. 421 ) Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + fence) Weight approx. 400 kg Working range: Ø 80-102 /flat 160x75/82 Drive: 1,4/1,9 Feed - roller conveyor approx. 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 320 mm cutting diameter: 140 mm stroke: mm total power requirement: 3 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 45 degrees: round: 100 mm capacity 90 degrees: flat: 150 x 110 mm capacity 45 degrees: flat: 120 x 100 mm engine output: 1,8 / 2,6 kW : 500 mm weight: 450 kg dimensions: ca. 1100x710x1850 m Semi-automatic vertical cold circular saw with pneumatic clamping and feed device 4 saw blade speeds (2 via motor / 2via gearbox: 11/22/44/88 rpm integrated coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mm cutting range: 120 mm capacity 90 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 170 x 100 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 120 x 100 mm capacity 60 degrees: round: RE 100 mm capacity 60 degrees: square: RE 85 x 85 mm capacity 60 degrees: flat: RE 85 x 100 mm work height max.: 900 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar total power requirement: 1.4 / 1.9 kW weight: 340 kg range L-W-H: 1010 x 765 x 2175 mm Furnishing : - semi-automatic vertical cold circular saw - pneumatic quick clamping device - Infinitely adjustable saw blade feed - Comfortable miter adjustment - Convenient stroke adjustment of the saw unit via clamping levers - Generously sized gearboxes - with Eisele rotation compensation for a long saw blade service life - Con ...

saw blade diameter: 350 mm cutting diameter: 115 mm capacity 90 degrees: flat: 200 x 80 mm turning speeds: 1700/3400 U/min saw-blade dia.: 350 x 3.3 x 40 mm motor: 400 Volt total power requirement: 1.8 / 2.6 kW weight: ca. 600 kg range L-W-H: 1000 x 850 x 1500 mm - in checked condition - machine video - https://www.youtube.com/watch?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

saw blade diameter: 275 mm cutting diameter: 90 mm stroke: 250 mm turning speeds: 40 / 80 U/min capacity 90 degrees: square: 75 mm total power requirement: 1,0 / 1,4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 600 x 700 x 1600 mm Features: - Coolant system - One-sided miter adjustment - Saw blade 275 x 2.5 x 40 mm - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

saw blade diameter: 450 mm cutting diameter: 150 mm turning speeds: 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat: 240 x 70 mm capacity 60 degrees: flat: 170 x 70 mm capacity 30 degrees: flat: 120 x 70 mm capacity 90 degrees: round: 150 mm capacity 60 degrees: round: 145 mm capacity 30 degrees: round: 120 mm capacity 90 degrees: square: 140 x 140 mm capacity 60 degrees: square: 125 x 125 mm : 100 x 100 mm total power requirement: 3,6 kW weight of the machine ca.: 1150 kg dimensions: 1450 x 1610 x 1900 mm Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Stroke x: 600 mm traverse path y: 400 mm traverse path z: 400 mm spindle retainer: ISO 40 spindle speeds: 80-4000 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x & y/z 4/2.5 m / min. Supply: 380 V, 16 kVA kW space: 2450 x 2200 x 1900 mm weight: 2250 kg