huvema sac levha çalışması kullanılmış satılık

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning dia. in gap: 515 mm spindle bore: 38 mm spindle turning speed range: 30 - 2200 U/min feeds - longitudinal: 0,067 - 1,485 mm/U feeds - cross: 0,033 - 0,742 mm/U voltage: 400 V / 50 Hz total power requirement: 2,5 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min grinding range: 150 x 540 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m Art.-No.16680 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660x27x0,9 mm cutting width: 400 mm cutting capacity - flat: 400 x 220 / 90° mm cutting capacity - round: 320 /90° mm speed: 20 - 100 m/min cutting capacity - flat: 280 x 200 / 45° mm cutting capacity - round: 280 / 45° mm sawing motor: 1,5 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2 kW weight of the machine ca.: 670 kg dimensions of the machine ca.: 1800 x 850 x 1200 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 235 mm turning length: 1000 mm turning dia. in gap: 560 mm spindle bore: 52 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/min feeds - longitudinal: 0,015 - 0,6 mm/U face feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mm thread - inch: 4 - 120 Gang / inch. tailstock quill diameter: 50 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 7,5 kW weight of the machine ca.: 1,85 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 325 mm saw band length: 4380x34x1,1 mm cutting width: 450 mm cutting capacity - flat: 450 x 325 / 90° mm cutting capacity - round: 325 /90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW total power requirement: 3 kW weight of the machine ca.: 1010 kg dimensions of the machine ca.: 2100 x 860 x 1500 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 300 mm no. of working stations: 2 Stück manually feed: ja 0 max. width of grinding wheel: 50 mm grinding wheel hole diameter: 25 grinding wheel speeds: 1420 U/min voltage: 400 V / 50 Hz total power requirement: 2 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 0,6 x 0,5 x 1,2 m • Work bench grinder with a disk diameter of 300 mm, • We are able to supply an under frame additionally, similar in execution as shown in the picture, additional price: EUR 210.00. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw  ...

sheet width: 2020 mm plate thickness: 2 mm distance between columns: 2030 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 1,22 t dimensions of the machine ca.: 2,5 x 1,0 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 9500 x 54 x 1,6 mm cutting width: 1020 mm cutting capacity - flat: 1020 x 1020 mm cutting capacity - round: 1020 mm speed: 20 - 100 m/min sawing motor: 4 kW hydraulic motor: 2,2 kW total power requirement: 7,5 kW weight of the machine ca.: 5860 kg dimensions of the machine ca.: 4500 x 1700 x 2750 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mm saw band length: 8200 x 41 x 1,3 mm cutting width: 810 mm cutting capacity - flat: 480 x 850 / 45° mm cutting capacity - round: 480 / 45° mm speed: 20 - 100 m/min sawing motor: 4 kW total power requirement: 6 kW weight of the machine ca.: 3100 kg dimensions of the machine ca.: 3000 x 1200 x 2350 mm Accessories: • Inverter • hydraulical vice • automatical movement to the top via hydraulical cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 315 mm cutting capacity - round: 100/ 90° mm cutting capacity - square: 90 x 90 /90° mm cutting capacity - flat: 85 x 110 / 90° mm cutting capacity - flat: 85 x 85 / 45° mm cutting capacity - round: 100 / 45° mm cutting capacity - square: 85 x 110 /45° mm saw blade turning speeds: 25 / 50 U/min voltage: 400 V / 50 Hz Motor output: 1 kW machine weight ab.: 240 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 370 mm cutting capacity - round: 115/ 90° mm cutting capacity - square: 110 x 110 /90° mm cutting capacity - flat: 110 x 110 / 90° mm cutting capacity - flat: 100 x 100 / 45° mm cutting capacity - round: 115 / 45° mm cutting capacity - square: 100 x 100 /45° mm saw blade turning speeds: 22 / 44 U/min voltage: 400 V / 50 Hz Motor output: 3 kW machine weight ab.: 270 kg Dimensions (L/W/H): 980 x 790 x 780 mm • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 40° left, 45° right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 25 mm, 225 mm, 150 mm

Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg

plate length: 1550 mm plate thickness: 3,5 mm number of rolls: 3 roll diameter: 120 mm total power requirement: 2,2 kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 2,2 x 1,5 x 1,6 m Electrically operated round roller via foot lever, Sturdy, welded construction stand, Rear roller adjustable for conical bending, Rollers are hardened, Top roller can be swivelled to remove the workpiece. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm thread dia.: M 24 mm feeds: 0,1 - 0,2 mm/U spindle turning speed range: 100 - 1450 U/min spindle taper: MT 4 table surface area: 560 x 385 mm Distance spindle/table max.: 780 mm distance spindle/base plate: 1320 mm voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 460 Kg dimensions of the machine ca.: 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t stroke: 400 mm table surface area: 800 x 500 mm feed down: 4,03 mm/sec feed up: 5,82 mm/sec column daylight: 820 mm oil pressure max. in the work cylinder: 400 bar oil volume: 26 l voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of tools: 156 St. 0: Handwerkzeuge : 6 St. weight: 55 kg range L-W-H: 840 x 480 x 760 mm The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Saw blade dimensions 315 x 2.5 x 32 mm - 2 saw blade spindle speeds approx. 40 + 80 rpm - Cutting range at 90° around 95 mm - flat 110 x 70 mm - at 45° around 90 mm - flat 85 x 70 mm - Mitre adjustable left + right up to 45 ° - Material vise - Drive 400 V / 0.75 / 1.3 kW - Space requirement approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg

Key data: 330 mm, 1000 mm, 330 mm

Turning length: 1,000 mm Turning diameter: 330 mm above bed 160 mm over cross slide Spindle Passage: 52 mm Spindle speeds: 70 - 2,000 rpm Equipped with: - 1x fixed bezel, 1x rotating bezel - Zahrade Theorem - Clamping pallet - Cheek chuck protection - Coolant device Country of origin: Netherlands Machine LxWxH: 1,800 x 650 x 1,400 mm Machine weight: 750 kg

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 240 mm : saw band length: 2965 x 27 x 0,9 mm table height: mm band speed: 37 / 76 m/min total power requirement: 1,0 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 1,0 x 1,6 x 1,4 m double miter band saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 350 mm saw band length: 4160 x 34 x 1,1 mm cutting width: 350 mm cutting capacity - flat: 400 x350 / 90° mm cutting capacity - flat: 400 x 350 / 30° mm cutting capacity - flat: 290 x 300 / 45° mm cutting capacity - round: 350 / 90° mm cutting capacity - round: 320 / 30° mm cutting capacity - round: 320 / 45° mm feeds - fine adjustment: 20-100 mm hydraulic motor: 0,37 kW coolant pump AC: 0,12 kW drive motor: 2,2 kW total power requirement: 2,7 kW weight of the machine ca.: 1,05 t dimensions of the machine ca.: 2100 x 1300 x 850 m Accessories : automatic sawing functions, hydraulic clamping, material feed via driven rollers, pneum. adjustable lowering speed, sawing programs adjustable via touch screen, EU quality and CE standards, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 3660 x 27 x 0,9 mm cutting width: 320 mm cutting capacity - flat: 320 x 300 /90° mm cutting capacity - round: 320 / 90° mm cutting capacity - square: 300 / 90° mm speed: 20 - 100 m/min sawing motor: 2,2 kW hydraulic motor: 0,37 kW coolant pump: 0,12 kW total power requirement: 2,8 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2100 x 1300 x 850 mm Features: • Inverter for adjustable speed • hydraulic lifting of the saw arm • automatic stop after sawing operation • manual saw blade tension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm total power requirement: 2.2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop () Furnishing: - Spindle speed continuously adjustable in 2x switching stages - TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - NEWALL digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle tap ...

sheet width: 1020 mm plate thickness: 2 mm distance between columns: 1020 mm bending angle max.: 135 ° total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1350 x 850 x 1175 m Max. bending angle 135° Manually operated with auxiliary spring on both sides. Upper beam opening 40 mm, Upper and lower beams segmented, Segment division: 25-30-35-40-45-50-75-100-150-200-270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 265 mm bore stroke: 150 mm taper MK: 3 MK table-size: 390 x 390 mm feeds: mm/U turning speeds: 100 - 3300 U/min total power requirement: 1,5 KW weight of the machine ca.: 0,35 t dimensions: 0,8 x 0,6 x 1,95 m Unused display machine with: - Thread cutting attachment - Variable spindle speed - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...

cutting diameter: 230 mm capacity 90 degrees: flat: 320 x 130 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: flat: 230 x 140 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 190 x 190 mm capacity 60 degrees: flat: 120 x 105 mm capacity 60 degrees: square: 105 x 105 mm capacity 60 degrees: round: 120 mm turning speed range:: 35 - 70 m/min dimensions of saw-band: 2720 x 27 x 0.9 mm height of material-table: 950 mm total power requirement: 1.0 / 1.5 kW weight of the machine ca.: 410 kg dimensions of the machine ca.: 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User ma ...

bore capacity in steel (diameter): 40 mm throat: 230 mm bore stroke: 130 mm taper MK: 4 MK table-size: 400 x 315 mm feeds: mm/U turning speeds: 105 - 1257 U/min total power requirement: 2,55 KW weight of the machine ca.: 0,35 t dimensions: 0,8 x 0,6 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 2,0 mm distance between columns: 1295 mm daylight opening: 46 mm : 135 ° total power requirement: Handbetrieben weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,8 x 1,2 m Segment bending machine, new. Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm. Including material stop, max 660mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 220 mm bore stroke: 120 mm spindle taper MT: 4 spindle turning speed range: 105 - 1257 U/min no. of turning speeds: 8 Stufen table surface area: 400 x 320 mm base plate: 390 x 650 mm voltage: 400 V / 50 Hz total power requirement: 1,1 / 1,8 kW weight of the machine ca.: 0,3 t range L-W-H: 2,1 x 1,0 x 0,7 mm with quick-action drill chuck 3-16 mm, drill chuck protection, work table can be rotated, swiveled and height-adjusted, coolant device, lighting, right/left spindle rotation, mechanical depth stop, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Line Salvagnini S4 P4 Year 2001/2003 S4 30 + P4 2220 + MD with unloading robot. Working line, regular assistance performed by the manufacturer

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1290 mm plate thickness: 5 mm pre-bending: ja roll diameter: 120 mm roll speed: 1 - 6 m/min total power requirement: 1,1 kW weight of the machine ca.: 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.