guss freze makineleri kullanılmış satılık

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Table area: approx. 1550 x 420 mm -Grooves: 5 piece 16 mm -Dimensions: see photo -Total dimensions: 1630/420/H180 mm -Weight 461 kg

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

Clamping plate, welding table, welding table, straightening plate -Surface: milled -Cast table -Length: 1995 mm -Width: 1995 mm -Height: 320 mm -Plate thickness: 42 mm -Transport dimensions: 1995/1995/H320 mm -Weight: 1647 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: bayonet disc mounting -Outer diameter: Ø 240 mm -Cone size: 6, cone Ø 106, hole circle Ø 133.4 mm -Weight: 7 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 340 mm -Admission thread: M75 x 6 mm -Weight: 23 kg

Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg

Clamping angle for workpiece clamping -Thickness: 15 mm -Surface: milled -Dimensions: 270/105/H115 mm -Weight: 6 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg

Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 11, bolt circle Ø 235 mm -Weight: 67 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 440 mm -Weight: 74 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 500 mm -Short taper mount for: bayonet mount -Cone size 6, bolt circle: Ø 133.4 mm -Weight: 73 kg

Faceplate, faceplate chuck -Mouth size: Ø 500 mm -Camlock: Short taper flange, taper size 8, bolt circle diameter Ø 171.4 mm -Weight: 54 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Admission thread: M68 x 6 mm -Weight: 20 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 500 mm -Length: 500 mm -Height: 125 mm -with supporting ribs -Plate thickness: 40 mm -Weight: 66 kg

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg

Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Clamping angle for workpiece clamping -Dimensions: 196/80/H100 mm -Thickness: 12 mm -T-slots: 8 mm -Surface: milled -Weight: 3 kg

- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 810 mm -Length: 1205 mm -Working height: 820 mm -with supporting ribs -Sheet thickness: 25 mm -Weight: 260 kg

Clamping plate, welding table, welding table, straightening plate, straightening table -Width: 1000 mm -Length: 720 mm -Height: 200 mm -with supporting ribs -Plate thickness: mm -Weight: 486 kg

Clamping angle for workpiece clamping, measuring device, for vice -Hole circle: 140 mm -Shaft: Ø 30 mm -Groove: mm -Surface: milled -Dimensions: 182/195/H180 mm -Weight: 8 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 900 mm -Short taper: 11 -Cone: Ø 196 mm -Hole circle: Ø 235 mm -Through hole: Ø mm -Weight: 238 kg

Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Clamping angle for workpiece clamping -Dimensions: 151/391/H191 mm -Thickness: 18 mm -Surface: milled -Weight: 16 kg

Clamping plate, plate field, welding table, welding table, plate boring machine, surface plate, -with: holes -Width: 1000 mm -Length: 1000 mm -External height: 150 mm, panel thickness 100 mm -Number: 7x plates available -Price: per piece -Weight: 720 kg/piece

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Number: 1x prism -Price: complete -Dimensions: 200/171/H92 mm -Weight: 12 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -Dimensions: 151/78/H132 mm -Weight: 6.2 kg

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 450 mm -Conical mount: Ø 110 mm -Groove: 16 mm -Weight: 66 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slots, heavy-duty version -Material: Cast iron -Groove width: 20 mm -Groove spacing 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 21 mm -Groove: 44 x 19 mm -Dimensions: 203/103/H153 mm -Weight: 6.4 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 170/90/H200 mm -Weight: 10.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 150/50/H130 mm -Weight: 4.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

Base plate, turntable, machine vice -Base plate with angle scale -Dimensions: see photos -Dimensions total: Ø 395 x 50 mm -Weight: 18.6 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 20 x 100 mm -Dimensions: 325/198/H222 mm -Weight: 22.1 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 10 mm -Dimensions: see photos / technical drawing -Dimensions: 230/155/H365 mm -Weight: 14.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with groove, solid design -Groove width: 24/31 mm -Dimensions: see photos / technical drawing -Dimensions: 150/120/H95 mm -Weight: 7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/70/H80 mm -Weight: 5,2 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 215/70/H105 mm -Weight: 5,1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 67 mm -Dimensions: see photo technical drawing -Dimensions: 101/97/H67 mm -Weight: 3.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 78 mm -Dimensions: see photo technical drawing -Dimensions: 123/100/H80 mm -Weight: 5.3 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 27 mm -Dimensions: 395/130/H300 mm -Weight: 36.1 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 380 mm -4 jaw chuck -threaded mount -Weight: 40 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 560 mm -Short taper mount: Ø 122 mm -Bolt circle: Ø 170 mm -Weight: 100 kg

Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 320 mm - Mounting thread: Ø 60 mm inside -Weight: 30 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg

Faceplate, faceplate chuck, four-jaw chuck -Feed size: Ø 450 mm -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Dimensions: 1000/600/H400 mm -Groove: 45 mm -Weight: 700 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping or placing material under it -Width: 94 mm -Length: 220 mm -Height: 15 mm -Number: 4x milling support available -Price: complete -Weight: 4.7 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: has a prism and scribing lines -1x Front side: with T-slot -Width: 1495 mm -Length: 3000 mm -Height: 302 mm -Sheet thickness: 80 mm -Plate: is equipped with supporting ribs -Number: 2x plates available -Price: per piece -Transport dimensions: 3170/1580/H302 mm -Weight: 2100 kg/piece

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with elongated holes -Clamping surface: 275 x 230 mm -Groove: 20 x 9 mm -Milled: from 2 sides -Dimensions: 330/275/H40 mm -Weight: 10 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Cast iron -Bores: Ø 28 mm, groove 228 x 28 mm -Dimensions: see photo -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 300/200/H100 mm -Weight: 15 kg/pc.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 1295 x 2000 mm -Sheet height: 90 mm Solid, planed underside -Groove width: 27 mm -Dimensions: see drawing in the photos -Overall dimensions: 1295/2000/H90 mm -Weight: 1587 kg

Operating voltage: 400 v Ma.Nr.: 41636 HEIDENHAIN positioning and control TNC 131 / 135 Complete Dokunnetation (operating instructions, technical plans) exists. Errors excepted!

Drilling capacity in steel: 32 mm Drilling capacity in cast: 40 mm Cutter head milling max.: 80 mm Projection: 220 mm Spindle speed: (12) 75-3200 RPM Spindle retainer: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swiveling: - 90 ° to + 90 ° Distance from spindle / table: 60-485 mm Head height: 425 mm T - slot size: 14 mm S1 motor power output 100%: 1,1 / 1,5 kW (400 V) Motor power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) : 1140 x 770 x 1500 mm Approximate weight: 287 kg without stand Features: Quick and easy change of speed using the gear selector switch Versatile application possibilities such as drilling, milling, thread cutting, … High running smoothness by polished, running in an oil bath gear gears Right - and the link run device for thread cutting Quill adjustment by means of ...

Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.

Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg

Stroke x: 600 mm traverse path y: 400 mm traverse path z: 400 mm spindle retainer: ISO 40 spindle speeds: 80-4000 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x & y/z 4/2.5 m / min. Supply: 380 V, 16 kVA kW space: 2450 x 2200 x 1900 mm weight: 2250 kg