bps recyclinganlagen granülasyon tesisleri kullanılmış satılık

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Demo machine from demonstration pool Enormously versatile cable slot machine thanks to individually adjustable, standing cutting knives. Cables are cut as standard by two knives penetrating the insulation on the side. The series was significantly improved in terms of safety in 2014 and now features a short feeder for thin cables and a long feeder for thick cables. The change is made in seconds by means of a rotary mechanism. The simplicity in the construction and the construction with two powerful, synchronously running rollers is left. With coarse gearing, even thicker cables are safely fed into the knives and transported further after the cutting process for removal. Blunt knives can be easily and cost-effectively sharpened with a standard grinding machine.

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Very stable trough conveyor belt with support rollers. 2.5 kW powerful motor for heavy materials. The conveyor belt was most recently used in cable recycling. The conveyor belt has no recognizable damage. The length is approx. 5.0 m and the width is 600 mm. The conveyor belt is immediately available from the warehouse in Weimar/Thuringia. For more information, please contact BPS at Recyclinganlagen.info. Just contact us.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

The MR 40-80 is a powerful single-shaft shredder for many tasks, such as the pre-shredding of cables, the crushing of electronic waste, used plastics, wood, etc. Unlike other single-shaft machines, IRS's shredder has two instead of one series of stator knives for better product quality and higher hourly output. The optimized arrangement of the rotor blades also reduces energy consumption. The horizontally acting hydraulic pusher has replaceable wear strips and regulates the contact pressure on the rotor. In addition, there are interchangeable screens for special tasks from 10 mm hole diameter. On request, the shredder can be optimized for cooling the rotor shaft, with wear protection armor, hydraulic clutch, remote services and other options for the respective application. Specifications: Number of knives: 35 + 2 (rotor + stator) Rotor speed: 85 rpm Rotor Ø, length: 400 mm, 80 ...

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

BRIKOL BT 1000 granulation line was built in 2019 in Poland by BRIKOL Sp. z o.o. (first launch in 2020). This extremely efficient and energy-saving system is designed for the production of pellets from various types of raw materials, i.e. wood waste, sawdust and bran. It features a number of components with the best technical parameters, which enable the entire production process to be performed fully automatically. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. The BRIKOL pellet production line is fully complete and has the following components: – MB37 hammer mill – drum dryer – kiln – pellet mill – pellet sifter – sawdust conditioner – tank – flight conveyor (2 pcs) – screw conveyor – binder hopper – cooling device – control cabinet with display and computer  ...

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

KG 50 Year of construction 2023 Condition new from stock Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.

STOKKERMILL K750 cable granulator-separator machine on order Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetric t ...

Diebels Recyclingmaschinen_Kabelgranulieranlage RMH 2 D Granulator: 11 KW Connected load: 19.6 KW Weight: 2,450 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recyclingmaschinen_Kabelgranulieranlage EUREKA 15 Granulator: 15 KW Connected load: 22 KW Weight: 2,500 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h

R 537: Recycling plasticizer (roller extruder) "MTA" Year 86, drive 200KW, plasticizing capacity approx. 800-1000kg/h, ideal for recycling plastics. The facility consists of the following parts: -Roller extruder -Batcher -Shearing device -Motor 200KW -Engine control cabinet "Schorch" -1 lattice box pallet spare parts FUNCTIONALITY: Ground plastic waste is fed into the plasticizer ------- heating ------- sausage kneading ------- shearing depending on the workpiece weight ------- further processing in presses The recycled plastic waste was used to make large parts such as garbage containers, plastic pallets, benches, flower pots, etc.

The Easy 180 cable pelletizing system is the ideal entry-level model for professional cable recycling. The throw-in on this one-man machine is done by hand. Pre-shredded cable material or uncut cables are thrown in. The Easy cable pelletizing system is very robust, powerful and delivers the best results from old and residual cables. The machine is characterized by: • Compact design • Low space requirement • Easy to use • Low energy consumption Operating instructions in German. Spare parts (knives, hole sieves) available. Year of construction: 2019; Condition: very good, ready for immediate use!

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Polymer plant incl. motors, tanks and agitators, etc.

- Complete system - incl. conveyor belt width 2400 mm with NEW CONVEYOR BELT - Incl. discharge hood with separating parting - INCL. BLOWER FOR FOIL SORTING - incl. SOFTWARE UPDATE FROM PELLENC - incl. COMPLETE OVERHAUL IN OUR SPECIALIST WORKSHOP IN D-59329 WADERSLOH - incl. COMPLETE DOCUMENTATION - YEAR OF CONSTRUCTION 2015

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

TECHNICAL SPECIFICATIONS Manufacturer: BOREMA Umwelttechnik AG Description: Manual sorting system Version: with feed hopper, conveyor technology, overbelt magnet Year of construction: 2024 Material: KVA pre-sorted, combustible waste Feed size: approx. 0-500 mm Required capacity: approx. 5.0 t/h FACILITY CONSISTS OF: 01) Vibratory Conveyor SFLU Dimensions (LxWxH): 5,000 x 800 x 250 mm Hopper volume: approx. 5 cbm 02) Climbing Tape FB Conveyor belt length: 3,000 mm Conveyor belt width: 1,000 mm Inclination: approx. 20° Drive power: 3 kW Rubber Belt: Supergrip 03) Permanent overbelt magnetic separator IMP Z-120 Material: magnetic FE metals Drive power: 2.2 KW, 400 V, 50 Hz 04) Sliding belt conveyor FB, manual harvest Conveyor belt length: 6,500 mm Conveyor belt width: 1,000 mm Drive power: 3 kW Hand sorting area: Lining with wood 05) Swivel Sliding  ...

Sorting/Cutting Table

Mobile sorting table Cycle Sort Type B BJ 2025

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

PAPER CARTON SORTER good condition Available now! cheap to give away

2 units air classifier type Nihot - 2 x 2 pieces blower - 2 x 1 piece airlock cheap to show off

Light material separator Remav LA 1400