beck ambalaj maschines kullanılmış satılık

composed of: Cellophanizer Shrink tunnel Conveyor belt and carton reseeers good condition

Passage height 220 mm Belt inlet 500 mm width Dimensions 1800 x 1150 x 1200 mm

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...

Dispensing system for capsule 16-fold with Packaging automation Abstract: The capsules are removed from the open form with the removal arm. On the removal arm, the presence of the parts is controlled. As soon as the removal arm reaches its end position in the robot the parts are turned with a 180° turning station. After the turning process, the capsules are stacked directly horizontally. A separate stack is formed for each cavity. Once the stacks have reached a number of 24 pieces, all of them are Stack ejected into a buffer. This buffer is driven by a vertical movement with a servo motor. As soon as all 16 stacks are in the buffer, it moves each level to the level of stacking table. Once a series has reached this level all 4 piles are pushed onto the table. From this table, the stacks are then moved by means of a 6-axis robot automatically packed into the boxes. S ...

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Very well maintained shrink tunnel , 400 V, 13 KW

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

Shrink tunnel from a German manufacturer: -Tunnel opening approx. 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m/min. -Choice of fixed or center-rotating tunnel bars. -The hot air flows can be adjusted separately at the top and centre via deflectors. -Ground air at the bottom can be switched on separately. -The machine can be pushed or fixed by means of lockable castors.

Manufacturer: BECK Machine type: Shrink Tunnel

Year of construction 2010 automatic inserting machine Touch screen computer control Vacuum Table Film packaging station neo X Inkjet Printing System HP BigJet 300 NT Compensating stacker RIMA RS 3313-S Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible.

Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.

Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible.

Two flow wrapping machines and a Hugo Beck shrink tunnel are available. 1) Hugo Beck Flexo 500 S flow-wrapping machine, year of manufacture: 2004, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recycled film/half-tube and flat film. 2) Flow wrapping machine Hugo Beck Flexo 500 S, year of construction: 2001, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recyclate film/half-tube and flat film. 3) Shrink tunnel Hugo Beck 5012/25, year of constructi ...

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment.

A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment.

HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment.

Manufacturer: Hugo Beck Model: Super 400 K5 Year of Manufacture: 2010 Machine Type : Horizontal Flow Wrapping Machine Used horizontal flow wrapping machine in good condition. Suitable for wrapping a wide range of products in polyolefin, PE, or PP film. - Product dimensions: up to 480 mm wide, 150 mm high, from 40 mm in length. - Output: up to 5,000 cycles per hour. - Working height: 820 to 900 mm - Machine weight: approx. 2,100 kg. - Film roll: max. diameter 400 mm, max. width 600 mm. - Power: approx. 12 kW - Supply voltage: 3 x 400/230 V, 50 Hz. Equipment included: film folding device FF700-IN, print mark control, seal welding with euro slot, longitudinal weld overlap 10 to 30 mm, press belt, pneumatically controlled press roller. Full documentation available: operator manual, electrical diagrams, spare parts lists, maintenance schedule, machine drawings, and third-party componen ...

A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.

0: - Beutel/min 0: - mm 0: - mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

packaging line, consist of the following plant components: - Thermoforming machine from the manufacturer GEA, type PowerPak RT500, incl. accessories and spare tools (year of construction approx. 2015) The system pulls the product cups 50 mm deep, at an output of 10 cycles/min and thus 120 packs/min. Some of GEA's transport rails are still in place. - Inserting robot from the manufacturer Alpma, type ER 10 with integrated checkweighbridge (built approx. 2019) The inserting robot has its own vacuum pump - Leak monitoring system from the manufacturer DVC (year of construction approx. 2019) Technical specifications Automatic checkweigher/checkweigher Manufacturer: Minebea Intec Type: EWK Model No.: FLEXUS 10/WS 2kg WZG-0CE Year of manufacture 2018 Max. packages/min: 128 Max. belt speed: 0.791 m/s Pneumatic pressure: 300 kPa Temperature limits: 5 - 40 °C Connected lo ...

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Sealing frame dimensions X/Y: 440mm/300mm, max. product height: 210mm, max. film width: 500mm, max. roll diameter: 300mm, packaging capacity: 300/h, connected load: 2.3kW. Machine dimensions X/Y/Z: approx. 1300mm/650mm/1100mm, weight: approx. 125kg. Documentation available. On-site inspection is possible.

Height=1.33 m, Overall length= 0.8 m, Overall width= 0.73 m, Net weight= 120 kg,

Hot melt / melter for packaging industry for sealing cartons ProBlue 4 1022230A Serial Number: SA06C26938

Pester PEWO-collect packing table, electrical connection 220V/50Hz, drive motor 0.55 kW, working height approx. 930 mm, machine footprint approx. 1300 x 1300 mm (LxW), machine height approx. 1400 mm, machine net weight approx. 220 kg

Technical Data Type of Machine : Automated Packaging Line Sorter Year of Manufacture: 2011 Number of chutes: 20 + 1 reject chute Control system: PLC Throughput: Up to 2,800 packs per hour Remarks The sorter is fed by an infeed conveyor (90° angle or straight). The infeed conveyor is included in the price. Inspection The sorter is currently connected to a Bizerba GLM-I Find more here - / Contact us at -

Used Sealing Edge Machine Poly-Bagging PP, Type: 500 BM - Automatic feeding and sealing of films - Packaging of various products, especially for shipping, storage or retail packaging - The machine is designed for durability and functionality in production environments Visits and test runs are possible by arrangement.

Manufacturer: Schubert Packaging Machine type: TLM Year of manufacture: 2017 IBN: January 2, 2018 Condition: Functional, very well maintained Availability: immediately The dimensions of the machine are: Total length: 19,842 mm (3,472 mm of the Pfankuch dispenser/reel feeder and 16,370 mm of the machine) Height: 2,795 mm Width: 3,680 mm Technical feature Value Unit Secondary packaging machine with robots 8 units Product transport via transmodule Package production 6 units Filling and sealing packages 7 units Machine speed 30–40 1/min Ultrasonic sealing Sealing packages 1 unit Mark and verify unit for serialization 1 unit Operating mode Cyclical, robot per station Operating side Right in the direction of goods outflow Drive side Left in the direction of goods outflow Number of uses 3 per transmodule/cycle Running performance (max. machine cycle) 30–40 packages/min ...

Packaging line for briquettes/pellets air pressure 6 bar voltage 400V power 20kW weight 800kg

Find more here - / Contact us at -

bag length: ca. 700 mm bag width: ca. 500 mm work impulse: - total power requirement: 10,2 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 2 2 2 m Movie: https://www.youtube.com/watch?v=TGGMb3B2UG0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.32 m, Overall length= 0.88 m, Overall width= 1 m, Net weight= 150 kg,

Beckhoff CP7001 - 1019 - 0000, 12,1" Display für Heinen Steuereinheit gebraucht . For Jagenberg Diana Pro. Used, tested.

Professional strapping machine with internal frame dimensions of approx. width 850 x height 800 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Band width 12 mm. -Equipped with ergonomic casters on the table surface. -Strapping release alternatively possible manually or automatically. -Up to approx. 25 straps per minute. -Strap tension adjustable. -Closure type: Welding in the heating wedge method. -Electronic temperature control. -The machine can be moved via castors. The machine can be demonstrated under power.

Becker BZ-2 Atomic - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of construction 2020 In the system, a trimming is first carried out at the front of the cardboard in order to to cut off possible damage to the van. After trimming, a Edge trimming on both sides of at least 30 mm each. Furthermore, if necessary, a corner is cut off from the cardboard. This is depending on the type of Fefco different. Finally, the cardboard is creased at the folding points and removed from the machine. The waste that is generated is transported by means of a waste belt underneath outside the machine. At the machine outlet there is a Conveyor belt, which disposes of the waste into a container. If the edge trim is too long, it must be cut inside the system so that it can be easily removed from the of the plant. The blanks and the ...

Flow (m3 / h): 70 m3/h, Flow rate (m3/h): 70 m3/h, Limit pressure (mbar): 0.5mbar, Engine: Leroy Somer , Elec: 230 / 400 V / 50HZ / 3Ph