zimmer taşlama makineleri kullanılmış satılık

width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 75 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 90 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

grinding wheel size: 200 x 25 mm Shaft diameter: 20 mm turning speeds: 2.800 U/min saw band speed: 20 m/s total power requirement: 0,75 kW machine weight ab.: 17 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 145 kg engine output: 1,27/1,7 kW : 83 dB speed: 15/30 m/s : 150x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5 / 33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...

cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine.

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

In 2001 we acquired the license and production rights of Strausak. These rights include the entire 57 U / W conventional series as well as the CNC machines of the type U / W CNC in the tool grinding range 3 G / 4 G / 5 G as well as in the universal cylindrical grinding area, the 2 axes / 3 axes and 4 axes CNC machine and special machines 81 CNC. We have an extensive stock of spare parts. Our specialization is the general overhaul of these machines, as well as the new production of the above-mentioned machine types and the production of special machines.

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

-High performance -Belt grinding device height-adjustable 0-90° -Maximum usable face grinding surface -Belt adjustment with fine adjustment -Combined belt grinding/grinding machine -Longitudinal stop for material guidance -Perfectly balanced and low vibration -Double-sided connection for dust extraction Ø 50 mm -Motor circuit breaker with undervoltage trigger -Fixed stop -1 sanding belt standard (brown), grain 80 -1 grinding wheel 250 x 40 x 51 mm, grain 80 -Spark protection -Connection cable with CEE plug -with machine stand, EMERGENCY STOP push button, brake and suction Delivery: in Germany free domicile incl. packaging

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Key data: 1025 mm, 1540 , 1090

Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...

Key data: 2300 mm, 2026 , 1615

Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The EVP 1500 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without oblig ...

Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation.  ...

Key data: 350 mm, 1470

Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...

Machine type: ESA 15 Manufacturer: ERBA Power kW: 3.37 Bdw3H9Emd2R Mud basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone system for the treatment of process water for mass finishing systems. It has a waste water tank with agitator, as well as a pure water tank and can produce up to 600 litres of fresh water per hour. Dirt particles are separated from the process water with 1500 g force and removed as a solids cake. The programmable logic controller (PLC) with touchscreen makes the condition of the machine particularly simple. The ESA 15 is also very space-saving due to its compact design. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with addi ...

Key data: 490 mm, 1120 , 990

Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...

Key data: 3560 mm, 2466 , 1800

Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...

Key data: 115 mm, 1540

Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...

Key data: 135 mm, 1550

Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will  ...

Key data: 220 mm, 1550

Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy  ...

Key data: 270 mm

Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...

Key data: 610 kg, 1510 mm, 1100 mm

Machine type: EVK 350 Manufacturer: ERBA Heating element kW: 2.2 Total volume: 350 lt. Description: With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 350 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Key data: 670 kg, 1500 mm, 1125 mm

SPECIAL PRICE valid for orders until 31.12.2024 including frequency converter! The EVP-RA 550 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit as well as a fully automatic PLC process control (optional) and is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated ...

Key data: 990 mm, 1730 , 1200

Machine type: EVK 500 Manufacturer: ERBA Heating element kW: 4.0 Total volume: 500 lt. Description: With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 350 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Key data: 1130 mm, 1600 , 1210

Machine type: EVP-A 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 550 lt. Description: The EVP-A 550 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit as well as a fully automatic PLC process control (optional). Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the ba ...

Key data: 490 mm, 1250 , 990

Machine type: EVP-A 220 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP-A 250 mass finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The  ...

Key data: 670 mm, 1500 , 1125

Machine type: EVP-A 350 Manufacturer: ERBA Power kW: 2.2 Total volume: 350 lt. Description: The EVP-A 350 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. ...

Key data: 1620 mm, 1915 , 1215

Machine type: EVP-A 800 Manufacturer: ERBA Power kW: 5.5 Total volume: 1.000 lt. Description: The EVP-A 800 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional cost ...

Key data: 360 mm, 1060 , 900

Machine type: EVP-RA 100 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 lt. The EVP-RA 100 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 100 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Key data: 1200 mm, 1600 , 1210

Machine type: EVP-RA 550 Manufacturer: ERBA Power kW: 4 Total volume: 550 lt. The EVP-RA 550 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories,  ...

Key data: 1620 mm, 1915 , 1215

Machine type: EVP-RA 800 Manufacturer: ERBA Power kW: 5 Total volume: 835 lt. The EVP-RA 800 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 800 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories,  ...

Key data: 3250 mm, 2400 , 1705

Machine type: EVP-RA 1700 Manufacturer: ERBA Power kW: 11 Total volume: 1.750 lt. The EVP-RA 1700 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 1700 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accesso ...