vecoplan mills kullanılmış satılık

Drum chipper / chipper / wood shredder Refurbished (Workshop Overhauled) Vecoplan Drum chipper type VTH-55/14/2 Factory overhauled (refurbished) with new bearing (spherical roller bearing), tested rotor and new drive motor Knives and counterknives new Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Year of manufacture: 1981 / overhauled 2007 Machine colour: RAL 6011 Reseda green Cleavers and counter-knives, new incl. 6 pcs. cleavers, new incl. steel substructure H = 700 mm without electrical installation Drum chippers | Wood chippers | Hacker | Chopping Machine | Wood chipping machine | Shredders | Wood shredder # Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned wi ...

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)

Vecoplan hacker, type 65/22/5 Technical data: - max. infeed width 650 mm - max. infeed height 220 mm - 3 feed rollers at the bottom - 2 feed rollers at the bottom - with new through rollers - excl. drive motor

VECOPLAN VAZ 120/105 U, single shaft shredder for wood, cardboard and paper, transport size : LxWxH 2,49 x 1,88 x 1,35 mt., Infeed size 1,2 x 1,05 m., 235 mm rotor Ø, rotor width 1.070 mm, Weight: approx. 2300kg, Rotor speed: 120 rpm, 18,5 kw 34.5A Electric motor with turbo clutch, V-belt drive, 2-stage, spur gearbox, motor speed 1.455 rpm 400V 50 Hz IP54 des.B3, Cobstructed in 1999, few hours worked, offered reconditioned., installed power - used power in work: about 60-65% : 20, availability: 2 weeks

Manufacturer: Vecoplan Model: VAZ 1300 Year of Manufacture: 2011 Type of Machine : Shredder System Technical Details: - Year of Manufacture: 2011 - Operating Hours: 4,718 - Throughput (depending on material): - Shredding stage P-3: approx. 1,300 kg/h - Shredding stage P-4: approx. 1,000 kg/h Performance Data: - Permissible load lifting device: 600 kg - Max. lifting speed: approx. 6 m/min Shredding performance (depending on screen hole size): - With 15 mm screen: approx. 700–800 kg/h - With 20 mm screen: approx. 1,000 kg/h - With 30 mm screen: approx. 1,300 kg/h Conveyor capacity: - Scraper chain conveyor: approx. 25 m³/h - Scraper chain conveyor speed: approx. 18.8 m/min - Screw conveyor speed: approx. 4.5 m/min Condition: - Shredder is disassembled. - In photos, hopper is rotated 90° and placed loosely. - No discharge conveying system (scraper chain conveyor) included.  ...

VECOPLAN VAZ 1300, multi-purpose single shaft shredder, 45 Kw drive, in its electrical, mechanical and hydraulic parts, Knives : 40 x 40 mm, Rotor lenght : 1.300 mm, horizontal hydraulic ram, hydraulic power station, control panel, constructed in 2007, the machine is offered totally reconditioned, installed power - used power in work: about 60-65% : 45 kW, availability: immediate, working width: 1.300 mm, conditions: reconditioned, type: single shaft, multi-purpose shredder

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

VECOPLAN VAZ M-K-T- 1600, 1.600 mm long rotor, rotor diameter 370, rotor rpm 200, HI-TORQUE a.c.motor 110 kW, n.42 cutting pieces 60x60 mm, screen size 60 mm (or different), horizontal ram, hydraulic pack, Electric cabinet, Total dimensions : LxWxH mt.4,315 x 2,885 x 1,600, Total weight kg.7.200 ca, Machine offered totally reconditioned, Our offer includes a MTA chilling unit, installed power - used power in work: about 60-65% : 110 kW, working width: 1.600 mm, conditions: reconditioned, type: Single shaft

1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good

1 piece of scratch chain foerderer 900/500 mm (W/T) length = 34 m; Very good

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

CATALOG NO. 7241 TECHNICAL DATA - inlet width 450mm - inlet height 230mm - shaft width 480mm - shaft diameter 380mm - number of knives 4 pcs - sieve size 50x40mm - toothed shaft pulling from above and below - shaft motor approximately 2×1.5kW - electric autoreverse - with conveyor belt - feed belt length 2190mm - feed belt width 440mm - front/backward belt feed - feed motor 1.5kW - main engine 30kW - dimensions length/width/height 3730x1670x1200mm - weight 1750kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 76900 PLN Net price: 17089 EUR depending on the price 4.50 EUR Net price: 20237 USD depending on the price of 3.80 USD (Prices may vary with higher fl ...

Part Number 7685 SPECIFICATIONS - inlet width 440mm - inlet height 300mm - shaft width 480mm - shaft diameter 440mm - number of knives 2pcs - sieve size 50x50mm - toothed pulling shaft from above and below - shaft motor 0.78/1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the infeed belt 4006mm - width of the feeding belt 380mm - Belt feed front/back - main motor 30kW - dimensions length/width/height 6100x1100x1100mm - weight about 2000kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 76900 PLN Net price: 18094 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Part Number: 7686 SPECIFICATIONS - inlet width 340mm - inlet height 120mm - shaft width 345mm - number of knives 2pcs -sieve - toothed pulling shaft from above and below - shaft motor about 2×1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the feeding belt 3850mm - width of the feeding belt 340mm - Belt feed front/back - main motor 22kW - extraction spigot diameter 220mm - dimensions length/width/height 5300x1500x1500mm - weight about 1500kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 43900 PLN Net price: 10329 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

SPECIFICATIONS: Hopper opening: 1300 x 600 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 600 mm 014 Knife Screen: 16 mm EQUIPMENT: Replacement Knife

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...