poly clip et ve balık işleme makineleri kullanılmış satılık

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

Poly Clip FCA 3430-18

Poly-Clip SCH 6210 Width x Depth x Height: 200 x 360 x 900 mm Weight: 10 kg Suitable clip sizes: SCH 6210: S 625/628/632/638 The SCH 6210 single-clip machine is manually operated. Operation is hassle-free and does not require much effort. A hand lever closes the rake flap and sets the clip. The excess intestinal or bag braid can be removed with the integrated cutting blade. The single-clip machine is ideal for sealing cut goods, for dividing portions and for bag sealing. All plastic, fibre, collagen and natural casings from small calibers up to 120 mm are processed. Advantages: - Manually operated - independent of energy sources - Easy to transport - low weight - Repeatable clip pressure adjustment depending on casing type - Integrated cutting blade - Machine made entirely of stainless material - Easy to clean Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 ...

Automatic Double Clipper Poly Clip FCA 3442, diameter up to 75 mm, performance up to 130 cycles/min, suitable for plastic - cellulose - and collagen casings, electronic control.

Clipping machine Manufacturer: Poly Clip Model: FCA 3462 Production capacity: 90 cycles/min Voltage: 400V (3+N, 50Hz) Electric power: 3kW Compressed air: 0.5 – 0.7 MPa Maximum closing diameter: 120 mm Dimensions: 1580x1440x2050mm Weight: 595 kg

CLIPPER POLY CLIP FCA 160 For the 38 mm to 160 mm calibre range. Up to 160 cycles/min The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Loop feeder 2 sets of funnels with brake Delivery time: ready to delivery

Clipping machine Manufacturer: Poly Clip Model: PDC 600 Semi-automatic double clipper Width: 1.000 – 1.100 mm Depth: 780 mm Height: 1.795 – 2.005 mm Weight: 118 kg Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa Air consumption: 4 bar 6,5 NL/cycle Air consumption: 6 bar 8,5 NL/c S-Clip: S 625, S 628, S 632, S 638

Type: ES5000 Serial number: 176 Year of construction: 2008 Labels: 60.3 x 19.8 mm Printing range: 38 x 18 mm Printer: Kortho hotprinter Compressed air: 6 Bar, 0.2Nl/cycle Power: 230VAC, 50Hz, 2.2kW Dimensions: 550 x 600 x 1400 mm Weight: 80 kg In combination with FCA or ICA type clipper

POLY CLIP 3430-18 YEAR 2005 PERFECT CONDITION

Clipping machine Manufacturer: Poly Clip Model: FCA 3463 Dimensions: 135x145x200cm Electric power: 3kW

Poly-clip PDC 600 Semi Automatic Double Clipper, for fibrous, plastic, natural and collagen casings, calibres up to 90 mm, on a trolley, Suitable for following clip sizes: S 625 / 628 / 632 / 638, upon request with separator, in good condition!

Poly-clip PDC 700 semi-automatic double-clipper, year of construction 2002, for fibrous, plastic, natural and collagen casings, calibres up to 115 mm, sits on a trolley, suitable for following clip sizes: S 735 / 740 / 744, air pressure: 4-6 bar, refurbished. The machine is immediately available and can be tested in Koblenz, Germany.

Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Punch for clipping machine Poly-Clip 163787 36 mm for FCA 90, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Punch for clipping machine Poly-Clip 59895 36 mm for FCA 3461, 3462, 3463, 3430-18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Clip outlet for clipping machine FCA 3430-18 Poly Clip Item number : 157124 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62391 - Klipper 18/13 / BR 36mm , koddiert, für FCA 80, FCA 3430-18,FCA 3461, 3462, 3463 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Format adjustment motor for Poly Clip FCA 120-S3160-S3 ,AHL 1200 - NEW 24 V Article number 167554 FCA 120/160 169753 AHL 1200 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : Die 156684 - clipper 15/11 / br 30 mm coded , for FCA3430/18, FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164005 - Klipper S 07 / br 26 mm , not coded , for FCA 120,160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164068 - Klipper M 09 / br 30 mm not coded, for FCA 120, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273113 - Clipper M 07 / 30 mm , not coded for FCA 80 , 90, 100, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273115 - Klipper M 07 / 30 mm c2, koddiert, für FCA 80 , 90, 100, 120, 140, 160 Request a Quote Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 40526 - 30 mm, not coded, for FCA 3430 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62147 - Clipper 18/11-12 / br 36 mm, single-sided coded for FCA 3461, 3462, 3463 , FCA 3430/18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Pinion Shaft for Poly Clip FCA 160 - NEW Product number 315593 / 193118 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

POLY CLIP 3430-18 PERFECT CONDITION

Clipping machine Manufacturer: Poly Clip Model: FCA 3430 Capacity: 200 cycles/min Diameter range: 24–90 mm Voltage: 400V / 50Hz Electrical power: 2.8 kW Machine dimensions:1,455x1,200x2,015mm Machine weight: 590kg

POLY CLIP FCA 80 YEAR 2013

POLY CLIP FCA 160 YEAR 2009 IN PERFECT CONDITION

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Completely safe in operations. Protected against penetration of water splashes. The motor can be used for a long time. It can be connected to grounded or ungrounded voltage. Protective cover made of several layers of steel and plastic. Waterproof. Dimensions: 250 x 210 x 350 mm. Motor: 0.18 Kw Weight: 10 kg.

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

REF-2531 CARNITECH CT2612 TWIN-LANE SALMON PINBONE REMOVER This machine is designed for removing the pin bones from salmon and trout fillets. Made of stainless steel. Easy operation and cleaning. Only one worker is required. Manufacturer: CARNITECH. Model: CT2612.25. Year: 2003. Capacity: up to 18 fillets/min per lane (total capacity 36 fillets/min). Product size: fillets from 0.5 to 3-4 kg. Voltage: 3 x 400 V + N + PE, 50 Hz, 16 A. Water consumption: 12 l/min. Overall dimensions: length 1,700 mm; width 850 mm; height 1,820 mm. Belt width: 580 mm. Weight: approx. 150 kg.

REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.

Totally overhauled Baader 189 Filleting machine for cod and whitefish This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Mesa 900 is specifically designed to efficiently cut the cheeks and tongues of fish heads. It is suitable for processing all mid-sized fish heads without special adjustments. The machine is equipped with two separate tubs, one for collecting offal and the other for the already processed heads. This item was settled up for range 300 – 500 g cod heads weights but could be easily reset back for 600 – 1300 g weight range, on demand.

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

Filleting machine for salmon and trout in good working condition, overhauled in Denmark in 2017 This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably ...

Baader 142 gutting machine Condition: Overhauled The Baader 142 gutting machine is specifically designed for gutting salmon, sea trout, and coho within a weight range of 2 – 7 kg, whether with the head on or head off. The fish to be processed is manually loaded onto the machine. With the assistance of a powerful tail clip, the fish is gently transported. The machine utilizes electronic measurements and calculations to determine the precise position for making cuts on the fish. It excels at performing accurate mechanical princess cuts. The integrated suction devices and throat cutting tools effectively collect and remove the guts. The throat is separated from the inside of the head while ensuring that the gills remain intact on the fish. We provide all necessary units for operating the Baader 142, including the vacuum pump, cyclone, and inspection belts. Capacity: Able to pr ...

Kronborg Mark 5 Fish Gutting Machine is specifically designed for gutting a variety of fish, including cod, saithe, haddock, whiting, hake, and even river fish like carp. It is suitable for use on trawlers and in land-based factories. The fish is continuously placed in the feeding chamber, where a conveyor belt with catches transports them through a positional system of guiding plates to the gutting chamber. A rotating knife cuts the fish as required. After the cutting process, the fish passes through a rotating nylon brush and water sprays, effectively removing the remaining entrails. The gutted fish is then directed towards the outlet end for further transportation. Due to its compact size and lightweight design, Kronborg mark 5 is suitable for use on coastal fleet vessels and shore plants. Status: Overhauled Capacity: Able to process 40 fish per minute Size range: Fish  ...

Baader 200 Fish Filleting Machine is overhauled, specifically designed for producing fillets of salmon, trout, and similar fish species. It is well known for its high processing capacity, precision, and reliability. This machine is used in fish processing plants around the world to automate the filleting process, improving efficiency and reducing labor costs. Manufactured by Baader, a well-known German company specializing in fish processing equipment. It efficiently processes both gutted and headed fish, with the option to include or exclude the collar bone. The Fish Filleting Machine ensures that the fish is fed through the tools in a manner that minimizes stress, and guaranteeing a smooth surface on the fillets. In the case of salmon, the machine can produce fillets with or without the collar bone, and with suitable adjustments, it can also process salmon sides while retain ...

Baader 187 Fish Filleting Machine Condition: Refurbished Baader 187 Fish Filleting Machine is overhauled filleting machine presented here is specifically designed for processing small whitefish within a size range of 30 to 55 cm (12″ – 22″). This compact and efficient filleting system offers a streamlined solution for handling these smaller fish. The machine’s speed is adjustable, allowing for a range of 25 to 40 fish per minute, which can be customized to match the operator’s skill level. The production capacity of fillets per hour depends on the average fish size. Lower image demonstrates the exceptional cutting results achieved by the BAADER 187, producing clean fillets with intact belly flaps and minimal wastage. Technical Specifications: Working Range: Small whitefish from 30 to 55 cm Capacity: 25-40 fish per minute Power Consumption: 1.5 kW Water Consump ...

Baader 184 is fish filleting machine for processing whitefish. Condition: Refurbished This extensively overhauled machine is specially designed for filleting gutted and headed cod, saithe, and haddock within a size range of 30 to 70 cm in total length (equivalent to 0.3 – 2.5 kg, head and gutted weight). Depending on the fish type, it can also handle fish smaller than 70 cm. Baader 184 incorporates the renowned Baader filleting system, known for its high yield and operational reliability. Additionally, it features an integrated skinning unit for added convenience. Key Specifications: Capacity: 24-40 fish per minute Power Consumption: 10 kW Water Consumption: 25 liters per minute Dimensions: 6.15 x 1.70 x 1.50 meters Weight (Net/Gross): 2550/2850 kg

Baader 185 Fish Filleting Machine is a robust and overhauled machine designed for efficient filleting and skinning of various whitefish species. These are large and medium-sized cod, haddock, saithe, and merluza, among others. Condition: Refurbished Similar to the Baader 184, the Baader 185 features larger guidance assemblies and tools, enabling processing of a wider range of fish sizes. The machine’s working range accommodates fish with total lengths ranging from approximately: 50 to 100 cm (equivalent to 1 – 8.5 kg) for cod 50 to 90 cm (1 – 6 kg) for saithe 50 to 80 cm (1 – 4.5 kg) for haddock Additionally, it can handle de-headed fish: cod measuring 40 to 80 cm (0.8 – 6.5 kg) saithe measuring 40 to 75 cm (0.8 – 5.0 kg) haddock measuring 40 to 65 cm (0.8 – 3.5 kg) Equipped with an integrated skinning unit, the Baader 185 Fish Filleting Machine e ...

Baader 188 Fish Filleting Machine Manufacturing Year: 1980 Condition: Refurbished Baader 188 is filleting machine is specifically designed for processing whitefish, and it has undergone a thorough overhaul to ensure optimal performance. It is capable of handling whitefish within a working range of 35 to 70 cm in length, which corresponds to a weight range of approximately 0.4 to 2.5 kg. With a capacity to process 27 fish per minute, Baader 188 Fish Filleting Machine offers efficient and consistent filleting operations. It has a power consumption of 2.2 kW, making it energy-efficient. In terms of water usage, Baader 188 Fish Filleting Machine requires a consumption rate of 20-25 liters per minute, contributing to efficient operation. It has compact dimensions, measuring 3.80 x 0.95 x 1.60 meters, and a net weight of 930 kg. Technical Specifications of Baader 188: Work ...

Condition: Excellent, fully renovated Baader 417 Fish Heading Machine is specifically designed for heading various species of whitefish, including cod, pollack, haddock, and whiting. It can also be utilized for processing perch and similar fish species. Size range: Suitable for fish with an overall length ranging from 30 cm to 70 cm. Baader 417 can handle up to 40 fish per minute. Water consumption: Approximately 5 liters per minute. Power consumption: 1.87 kW. Electricity: 400 V / 50 Hz. Equipped with a plastic elevating belt featuring dividers. Belt width: 150 mm. Height dividers: 80 mm. Elevating height: 1450 mm. Dimensions (Length x Width x Height): 2160 mm x 885 mm x 1860 mm

Mesa 955 Fish Heading Machine Condition: overhauled. Machine designed for cutting lower jaws and cleaning fish heads using water-pressured brushers. It’s ideal for whitefish like cod, haddock, and pollock. The machine’s variable speed drive gives you precise control over fish heads during processing. Plus, it easily integrates into current production lines, enhancing workflow and efficiency.

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph

Baader 694 Bone Separator 500kg raw material per hr 3mm drum New belt and new blade, serviced.

Baader 697 Bone Separator Model: 697 Rated at 1200kg raw material per hr 3mm drum Ex butter factory. Supplied with new side hopper Full working order

Baader 580 Fish Filleting Machine x2 units available 2012 & 2004 Regularly serviced and well maintained, ex factory Whitefish

Baader Filleting Line Includes conveyors, header, 588 filleting machine, trimming line, spares, shaprening machine 2021 Full details on request

Baader Fish Filleting Machine Model: 185 Designed for medium-large whitefish Last used on cod/haddock Overhauled in 2020 and little use since

Fish Skinning Machine Make: Steen Model: ST600 Built 2008 Regularly serviced and well maintained

Deglazing Machine Electrically heated 1000mm belt width Make: Sharp Built 2019

Used Baader fish fillet machine type 483. Year of manufacture 1993.

see picutre for hours Find more here - / Contact us at -

Height=1.06 m, Overall length= 0.9 m, Overall width= 0.71 m, Net weight= 75 kg,

Height=1.46 m, Overall length= 0.51 m, Overall width= 0.53 m, Net weight= 208 kg,

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

If you have any questions: 01718367957

Net weight= 31 kg,

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Meat processing equipment from a modern German butcher's shop for sale. The equipment consists of: • Seydelmann AD 114 automatic grinder • Kilia Meister Plus 50, 50 liters bowl cutter with variable knife speed • Vemag Robby Typ 136 vacuum filling machine with casing holding device • Poly Clip SCD 7095 clipping machine • Stiller can seaming machine DV 10 PS • Maja SA 85 S ice generator • Vakona ESK 125 Tumbler • Stein smoke house • scales, slicers, moulds, stainless steel tables If desired we can arrange worldwide delivery and send our German master butcher to instruct your staff on-site.

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

One unused rotary valve from Buhler, opening 275x250mm. Extra cone included, inside flange diameter 235mm.

WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF

Stephan micro cutting and vacuum mixing plant, consisting of: Stephan Mikroschneider, machine type: MCH 20/VM, machine number: 726.107.02, year of construction: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixing plants, machine type: VM/MC 450/450/20, machine number: 726.107, year of construction: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume tank: 485 liters, permissible operating pressure container: -1 / 0.3 bar, permissible operating temperature container: 95 °C, Volume jacket: 38 liters, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of construction: 2000, Q: 30 m³/h, overall dimensions mixing plant: 4900 mm x 1950 mm x 3400 mm, incl. s/s platform with stairs, di ...

X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - / Contact us at -

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

Capacity 200 kg/hour With the DLE Mini deleafer washing system

1 juice sewage treatment plant with a rotary drum with diatomaceous earth and Light vacuum, applied for cleaning cloudy juices Shell area of the drum approx., 2.5 m² with vacuum pump, with centrifugal pump for conveying the juices with upright vacuum container Year of manufacture 1996

Elmo Rietschle VC300 Vacuum pump 3x Elmo Rietschle oil lubricated rotary vane pumps, 5.5Kw, 300 M3/H flow rate

Manufacturer: Seydelmann Model: AU200 The Seydelmann Automatic Grinder is a powerful and robust machine, that meets the highest quality demands of the end product under optimal hygienic conditions Technical Specifications: Hole Plate Diameter: 200 mm Hourly Output: Up to 14,000 kg/h (30,865 lbs/h) Motor Power: 34/52 kW (46/70 HP) AC-6 Motor Power: 80 kW (107 HP) Hopper Capacity: 400 Liters Weight: 1,600 kg (3,527 lbs) Weight with Loading Device: 1,900 kg (4,189 lbs) Find more here - / Contact us at -