microstep kaynak makineleri kullanılmış satılık

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

CNC Portal Flame Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of Make: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission Parameter database iMSNC control / Windows® "AsperWin-Basic" programming system, for programming directly on the machine control system Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for graining) via plasma source Module "THC" / Automati ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL PAA 9001.25 Year of Make: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i 2 oxyfuel burners propane Beuting vibrating conveyor table Donaldson DFPRO12 filter system for outdoor installation

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8516 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Software: Apser 3.5 - Basic Module Operating hours: 37500 h Work table length: 3000 mm Work table width: 2000 mm High Pressure Pump: Hypertherm 50 OEM (4100 bar) Cutting head: Allfi AMS

Inv. Num. : 8518 Type: MasterCut Compact 60 Producer: MicroStep Created: 2017 Parameters: Control System: iMSNC Software: AsperWin Basic (2017) Switch-on hours: 17000 h Operating hours: 8800 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Formica ForCut 203A KPA Machine height: 2030 mm Machine length: 8100 mm Machine width: 2800 mm Machine weight: 5140 kg Equipment: Technical documentation

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of Make: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with power source Kjellberg HiFocus 280i TEKA filter system

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

Inv. Num. : 9040 Type: EasyCut 9001.30 PG Producer: MicroStep Created: 2015 Parameters: Work table length: 9000 mm Work table width: 3000 mm Plasma Source: Formica ForCUT 163WDM

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

Find more here - / Contact us at -

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

Manufacturer: MicroStep Model: MSF 4001.25L Type of Machine : CNC Cutting System Features: - 2D laser cutting head with IPG fiber laser source YLS 4000 - Fully automatic change table - Automatic loading and unloading system MSLoad Technical Data: - Working Area: approx. 4,000 x 2,500 mm - Guides: High-precision linear guides - Drive: Maintenance-free Panasonic AC servo motors - Positioning Speed: Up to 130,000 mm/min - Measurement System: IRC 2500 (incremental encoder) - Z-axis Positioning Speed: 18 m/min - Z-axis Travel Range: 150 mm - Z-axis Acceleration: 0.75 G - Positioning Accuracy (Pa): 0.07 mm (according to VDI/DGQ 3441) - Repeatability (Ps): 0.03 mm (according to VDI/DGQ 3441) - Ambient Temperature: +10 °C to +35 °C - Relative Humidity: 0% to 90% --------------------------------------------------------------- Find more here - / Contact us at -

Laser cutting machine Type: MSF 4001.20Ltk+T500 4kW IPG Manufacturer: MicroStep Year: 2016 Working area: 4000 x 2000mm + space for pipe cutting Laser: 4000 W IPG Linear guides Rexroth Gear racks Precision helical gears ATLANTA on all axes, double-sided driven portal STOBER gearboxes Drives maintenance-free, processor-controlled AC-servos Panasonic Max. positioning speed 130 m/min - one axis, 180 m/min simultaneously 2 axes. Acceleration 10 m/s2 Z-axis positioning speed 50 m/min Z-axis travel 150 mm Z-axis acceleration 0.75 G Position deviation Pa 0.07 mm in accordance with VDI/DGQ 3441 Repeat return accuracy Ps 0.03 mm in accordance with VDI/DGQ 3441 Ambient operating temperature +10 °C to +35 °C Relative humidity 0 to 90 % Machine in very good condition, under power Find more here - / Contact us at -

table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine.

This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information.

This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine.

This MICROSTEP MSF 9001.25Lr+T500 Fiber laser cutting machine was manufactured in 2015 in Slovakia. It is equipped with a 10kW laser, nLight CORONA-CFX-10000. The working area is 9000 x 2500 mm and the maximum cutting capacity is up to structural steel of 25 mm. As additional equipment the machine comes with Donaldson DFPR08 extraction equipment, automatic lubrication system and beam guidance via light cable. The machine was retrofitted in 2022.

This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information.

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Manufacturer: MicroStep Model: MSF Compact 1501.30L Type: CNC Fiber Laser Cutting Machine Year of Manufacture: 2020 Laser Source: IPG YLS-3000-U Laser Power: 3.0 kW Working Area: 1500 x 3000 mm Maximum Material Thickness: 10 mm stainless steel Power Supply: 3L+N+PE AC 400/230 V / 50 Hz Rated Current: 20 A Weight: 500 kg Protection Class: IP 54/20 Standard: IEC 61439-1 Condition: Used Find more here - / Contact us at -

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information.

sheet width: . mm plate thickness: . mm serial number: 20719 total power requirement: . kW weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding machine accessories TIG welding machine CEBORA AC/DC 2240/M365g, with grinder TIG-POINTER Cronitex TIG-Pointer SW, on table

Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection

Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Throat depth: 455mm Arm distance, stufemlos: 168-443 mm Electrodes Cone: Mk1 --- Welding control: WS 402 (4-times, 2 program) --- Incl. additional options: -Foot switch -Main switch -3 m connection cable and Cekon-plug 32A --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Technical data: -5 x good plate surface, 2 x good plate with hole -Mounting plate - length approx. 1485 mm -Width approx. 990 mm -Plate thickness 50 mm -Plate thickness with ribbing 115 mm -Height adjustable in height approx. 880 mm - plate frame -4 T - longitudinal grooves L 1485 mm -Distance between the grooves 250 mm -Sliding distance from outer edge 120 mm -Keyway width approx. 17 / 38 mm -Groove depth approx. 40 mm -Weight approx. 950 kg -Space requirement approx. L T 1485 x 990 x H 880 mm

Technical data: -Capacity approx. 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, type 6 PTF, BJ. 97 - space requirement approx. B H 1100 x 1300 X 1600 mm -Weight approx. 300 kg

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

Rated output at 50% ED: 4kVA Clamping force: 200daN Compressive strength: 80daN --- Incl. additional options: -Post annealing equipment -Trolley -Grinding machine for deburring --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Manufacturer: Kemppi (Finland) Power: 5 - 300 Amp semi-automatic electrode welding machine Welding pliers new! (length approx. 4.70 m) Ground cable new! (length approx. 3.70 m) Connection cable 5 pole new! (length approx. 2.90 m) Note: There are 3 equivalent devices in stock! The price refers to the unit price! (Changes and errors in the technical data and prices reserved!)

Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding

KEMPPI FastMig M 420 MIG/MMA welder was built in 2016 in Finland by Kemppi Oy. The machine, which is a configuration of high-quality components, is designed for both complex manual and mechanised MIG/MMA welding. With unlimited flexibility for specialised tasks and materials, the FastMig M420 welder is the best choice for businesses looking to increase productivity and welding quality. The KEMPPI semi-automatic welding machine consists of the following parts: – power source: KEMPPI FASTMIG M 420 – wire feeder: KEMPPI MXF 65 – feeding roller: DT400 – cooler: KEMPPI FAST COOL 10 – 4-wheel trolley: KEMPPI PM500 – connecting cable 10 m There are 2 units of these machines for sale. Price included in the advertisement is for 1 unit. Technical specifications of the KEMPPI FastMig M 420 welding machine - supply voltage: 400 V (-15% to +20%) - rated power (60%/100%):  ...

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...

ALPHA Q 351 PROGRESS PULS MM WLG FD • Year 2016 • Inverter welding machine, DC, pulse, water-cooled • Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging • Water-cooled MIG/MAG inverter welding machine, pulse, with separate wire feeder Excellent Multimatrix welding characteristics • Equipped with Synergic characteristics for EWM coldArc, EWM coldArc puls, EWM pipeSolution, EWM forceArc, EWM forceArc puls, EWM rootArc, EWM rootArc puls and superPuls • Adjustable start and end-crater functions • Program operation with 16 programs per JOB • Equipped with Synergic characteristics for GMAW welding of steel/CrNi/aluminium • Infinitely adjustable arc dynamics (choke effect) • Large power reserves thanks to high duty cycle with all components heating up less as a result, guaranteeing a longer service life for machines when in use •  ...

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Bihler B-4/2 Welding Control System. Connection: 400 V 50 Hz. Equipped with welding component ET50.6 . Year of manufacture: 1988/04. Made in Germany. More Bihler and Bruderer machines on stock.

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.

Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

one used vertical buttwelding machine Strecker, model SS120 for welding 8.0mm to 30.0mm and 120 kVA

Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003

Punk welding machine Brand: Zinser Type: P 10 FS 380V, 50 Hz Power: 3.18 KVA The indicated price is net. Can be visited in our warehouse. Delivery is possible at an additional cost.

offer 22679 Specifications: - sheet thickness 50 mm - min. straight edge 3 mm - Bevel angle adjustable 25 - 55 ° - Working speed 1.5 - 3.1 m/min - Crane suspension bracket - Drive 400 V / 4 kW - Space requirement approx. W 1400 x D 1200 x H 1950 mm - Weight approx. 1500 kg

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Maximum welding power 104 kVA Arm spacing 100 - 500 mm Projection 500 mm Air pressure 60bar

One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence