megamat diğer depolama ekipmanları kullanılmış satılık

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

We offer LTG-TowerMax L 70.0-304-2448-816-7510 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines are available Exterior Dimensions: Height 7510 mm Overall width 2700 mm Overall depth 2820 mm Total payload machine up to 2 x 35,000 kg 55 carriers for up to 304 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening at 950 mm above OKFF, then 915 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer an LTG-TowerMax L 70.0-150-2448-1071-5885 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 5885 mm Overall width 2840 mm Installation depth 3500 mm Total payload machine up to 2 x 35,000 kg 60 carriers for up to 150 kg payload each in clear usable dimensions: W = 2448 mm T = 1071 mm Usable height up to 50 to 750 mm Start of the operating opening in 840 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer a LTG-TowerMax L 18.0-170-2448-816-7510 storage lift with a completely new StoreControl L control system, which we have modernized. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 13.5-450-30-410-7935 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 7,935 mm Overall width 3,501 mm Installation depth 1,820 mm 30 carriers with a payload of 450 kg each in clear usable dimensions: H = 410 mm W = 2,850 mm T = 628 mm Chain jump 457 mm 60 galvanized intermediate floors for 150 kg each Total payload up to 13,500 kg Side table in 1000 mm above OKFF with NiRo worktop, 400 mm deep Colour scheme grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer an LTG-TowerMax L 18.0-250-1220-816-6010 storage lift with a completely new StoreControl L control system. Exterior Dimensions: Height 7510 mm Overall width 2760 mm Overall depth 2650 mm Total payload machine up to 2 x 9,000 kg 40 carriers for up to 170 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 12.6-300-42-215-6080 with a completely new StoreControl P control system. currently 2 identical machines available, Exterior Dimensions: Height 6,080 mm Overall width 3,350 mm Installation depth 1,500 mm 42 carriers with a payload of 300 kg each in clear usable dimensions: H = 215 mm W = 2,650 mm T = 520 mm Chain jump 254 mm Total payload up to 12,600 kg 1000 mm side table above OKFF with NiRo worktop, 300 mm deep Colour scheme beige/beige Motor power drive 1 x 5.4 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

We offer an LTG-TowerMax L 70.0-331-2448-816-6210 storage system that we have modernized with a completely new StoreControl L control system. Exterior Dimensions: Overall height 6210 mm Overall width 2780 mm Installation depth 2908 mm Total payload machine up to 2 x 35,000 kg 50 carriers for up to 331 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 990 mm high Engine power Vertical drive 5.2 kW / 400 Volt Horizontal drive 0.75 kW / 400 Volt Rocker motor 0.4 kW / 400 V Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer LTG-TowerMax L 40.0-340-2448-816-8760 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Overall height 8760 mm Overall width 2778 mm Installation depth 2800 mm Total payload machine up to 2 x 20,000 kg 48 carriers for up to 340 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

We offer a paternoster LTG-TowerMax P 15.7-628-25-360-6010 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,010 mm Overall width 3,501 mm Installation depth 1,820 mm 25 carriers with a payload of 300 kg each in clear usable dimensions: H = 360 mm W = 2,850 mm T = 628 mm Chain jump 406 mm 25 galvanized intermediate floors for 140 kg each Total payload up to 15,700 kg Side table in 1000 mm above OKFF with plastic worktop, 300 mm deep Colour scheme grey/grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries

Lift system, Megamat, 170kg / shelf, approx. 6m high, – used - : Ex-site price: 14.500.- € (net), plus dismantling etc. Manufacturer: Megamat Type: Megalift 14448/25/6010 Year of Make: 2000 Max. load capacity per shelf: 170kg Max. total load capacity 18,000kg Dimensions per shelf: approx. 2.45m x approx. 0.80m Number of shelves: approx. 40 pieces Device dimensions: Height: approx. 6.01cm Width: 2.76m Depth: approx. 2.70m 3/N/PE 230/400V 10A, Fuse 16A Condition: good Available: immediately Location: BG-8800 Sliven

Lift system, Megamat, shelf size: 2.24 x 0.61m, height approx. 4.26m, 360kg / shelf – used - : Price ex location: 15.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat / Kardex Year of Make: 2001 Type: Megalift 14436/50/4260 Device number: 70744 Max. load capacity per tray: 360kg Permissible total load: 40,000kg Device height: approx. 4.26m Width: approx. 2.45m Depth: approx. 2.45m Number of shelves approx. 60 pieces (still to be verified on Tuesday, 24.3.26) Dimensions shelves: approx. 2,248mm x 612mm 3/N/PE 230/400V, 12A, fuse supply cable 16A Condition: used Available: immediately Location: D-77728 Oppenau

Height=0.19 m, Overall length= 0.34 m, Overall width= 0.35 m, Net weight= 18 kg,

Height=0.57 m, Overall length= 0.52 m, Overall width= 1 m, Net weight= 195 kg,

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...

carrying capacity: 1400 kg dimensions: 1690 x 950 x 1700 mm While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

While stocks last 4x hinges the pallet frames are foldable Weight: approx. 9.5 kg for 1200x800x200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2100 kg dimensions: 1750 x 950 x 1600 mm Technical data: Usable depth: 2x 420 mm Usable height: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4x lifting devices for floor rollers for internal transport, Bloksma – never in use - : Price per piece from location: 1.950.-€ (net) Manufacturer: Bloksma ZB Lifting Device Year of construction: 2024/11 Type: G4-HET-FVBEP-200 Part Number: 210926A19554 Serial Number: H-26277 L435xB280/GOK935 Lifting device electric G4 Model HET-F Semi-mobile version Loading direction front loading Load capacity 200kg Speed 31mm/sec Load mount for BLOKSMA floor roller BOF + BOZ For floor roller size 600 x 400mm + 630 x 430mm Thrust direction transverse Electric control 230 V / 50 Hz 250kW, 16A Motor with spindle drive Control element: detachable control panel Height Detection Sensory Height Detection for One-Piece Closed Containers GOK approx. 935mm Colour base body RAL 9010, hood RAL 4006 Former new price: approx. 4.000.-€ / piece (net)

14 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -13 Stand / 28 bars -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.50 m, depth 1,10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 350 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU ...

Bearing platform 4,000 x 5,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 Cross Associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Inhpbdx Columns: 100 x 100 x 3 mm Main beam: C-Profile C+300 x 3 mm (perforated) Cross member: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, white on one side P6 Columns in the following standard colors: Ral 7035, light grey Ral 70 ...

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

Bearing platform 12,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data: Dimensions steel construction: 12,000 x 5,000 mm Dimensions floor area: 12,000 x 5,000 mm Floor area: approx. 60 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 8 stand, one side 100 x 100 x 3 mm 6 main beam C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross member S+300 x 2 mm, L = 4,800 mm (closed) 26 Mounting angle 3 Cross Associations 24 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000 fire red Ral 5003 sapphire blue (other colors on request) Main and cross bea ...

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

Bearing platform 16,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 16,000 x 5,000 mm Dimensions floor area max.: 16,000 x 5,000 mm Floor area: approx. 80 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: OK minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 10 stand, one side 100 x 100 x 3 mm 8 main beam C+300 x 3 mm, L = 3,990 mm 18 cross member S+300 x 2 mm, L = 4,800 mm 36 Mounting angle 4 Cross Associations 33 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035 light grey Ral 7016 anthracite grey Ral 3000, red, fire Ral 5003 sapphire blue (other colors on request) Main and cross beams galvanized  ...

P79 - used approx. 6 m³ / 6,000 litred polyester tank / GRP tank, Juno-tank, aboveground, vertical, on four bases, in good condition. volume: approx. 6 m³ / 6,000 litres material: polyester / GRP height tank: approx. 2.70 m overall height: approx. 2.84 m width: approx. 1.24 m Manufacturer Juno, vertically standing, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank h ...

Remmert LaserFLEX | Fully automatic loading and unloading –used-: Price from location: 145.000.-€ (net) plus dismantling etc.! Manufacturer: Remmert Type: LaserFlex Year of construction: approx. 2020 Format 3015 Payload: 1,000kg 220kg/m2 Maximaile sheet metal dimensions: 3048 x 1524 mm Maximum sheet thickness: 25mm SMART Control 4.0 Can be combined with a sheet metal storage system (the sheet metal storage is not part of the sale) Former new price: 250.000.-€ (net) Manufacturer's text: Equipped with two automation units - one loading and one unloading unit - the LaserFLEX enables decoupling of the feeding of a laser cutting system. After the cutting process, a fork unit lifts the machined metal plate from the changing table. At the same time, a new sheet from the connected warehouse is transported by a vacuum unit. As soon as the plate is placed next to the l ...

GP113 - used approx. 15.8 m³ / 15,800 litres PVC-GF tank, aboveground, vertical, flat bottom, in good condition. volume: approx. 15.8 m³ / 15,800 litres material: PVC-GF tank diameter: Ø approx. 2.30 m height: 4.30 m Vertically standing PVC-GF-tank, aboveground storage tank, round shape, flat bottom, access on the tank body, multiple in- and outlets on the rooftop. Tank as shown on the pictures. For media with a specific weight of up to 1.42 kg / L. The container can be used as a storage tank for water, feed, liquid feed, manure, seeping juice, rapeseed oil, or as a rain collection tank, water tank and more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank  ...

Storage paternoster, Kardex, approx. 5.96m high, 250kg / gondola – used - : Price ex location: 14.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer Kardex Type: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, before 2000 Device height: approx. 5.96m Device width: approx. 3.01m Device depth: approx. 1.24m + 0.30m for the table shelf = total 1.54m Number of gondolas: 40 pieces Dimensions of gondolas: Width: approx. 2.48m Height: approx. 23cm Depth: approx. 41cm Max. load capacity per gondola: 250kg Total permissible payload: 10,000kg Unload: 1,000kg Dialing the gondola via the number of the gondola no longer works – the device must be controlled via the up/down button. Condition: good, Available: immediately Location: 45481 Mülheim a.d. Ruhr

GP118 - used 50 m³ / 50,000 litres polyester tank / GRP tank, aboveground, on steel pedestals, in good condition. capacity: approx. 50 m³ / 50,000 litres material: polyester / fiberglass length: approx. 10.70 m diameter: Ø approx. 2.50 m height incl. base: approx. 2.90 m Aboveground storage tank of round shape, lying horizontally on five steel bases or on a steel base frame. Access on the top of the tank body, one DN100-spout at the bottom of the front side, several in- and outlets. Tank has been newly painted, twice in stock. This container can be used as a storage tank for many different media, such as water, liquid feed, whey, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater collection tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not p ...

P132 - used approx. 20 m³ / 20,000 litres polyester tank, GRP tank, Juno tank, in good condition. technical details: capacity: approx. 20 m³ / 20,000 litres material: polyester tank / GRP tank manufacturer: Juno weight: 1.5 tons dimensions: Ø 2.00 m x approx. 6.50 m long / total height including base 2.40 m Used storage tank in good condition, aboveground, incl. steel bases, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that thi ...

Shelves for drying lacquered wood Capacity Kg: 880

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Service station - Hoftankstelle - Diesel filling station with 5,000 litres capacity, brand new, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings Equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue.  ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

properties: Used roller conveyor from the manufacturer Overbeck Very stable design Incl. SEW motor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Plant consists of 49m Optional: Side guide Price per meter SPecs: Dimensions of the roller conveyor Storage roller conveyor with drive approx. 49 meters Total width approx.: 510 mm Conveyor width: 440mm Axis spacing: approx. 100 mm (adjustable) Drive type: Flat belt / lashing belt Material: steel, galvanized Profile Height: 140mm Colour: Blue roller conveyor The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the fee ...

automatic storage CASSIOLI.

The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

dimensions: 900x 1200 mm Ideal as a floor for heavy duty shelving div. sizes available - 900x 1200mm - 1000x1100 mm - 1000x1200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

brand new - with a capacity of 10,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - zinc yellow / RAL shade 1018 (see sample photo). (Other RA ...

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

The scope of delivery includes: 01x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 10x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 28x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 1.044x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Weight / 1.044 pcs.: approx. 380,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the ...

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded - Delivery is only up to the curb - For unloading, access and departure routes to the Unloading point r ...

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Package: approx. 17,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded

Aluminium silo with hopper, used for plastic granulates, height 6000 mm, diameter 2400 mm, density 1000 kg/m3, capacity 18.5 m³, full and empty detector

Construction site price: approx. 9,000 pieces open fronted storage stacking boxes, metal, similar type: 14/7-2, approx. 50 x 30 x 20cm, with support rod - used - : Price (net) per piece from location: Price for complete acceptance: 9.-€ (net) / piece. For purchase of 10 pallets of 40 pieces: only 15.-€ (net) / piece On acceptance 33 pallets (truck full) of 40 pieces each = 1,320 pieces: only 12.-€ (net) / piece For purchase of 66 pallets of 40 pieces: 10.-€ (net) / piece Manufacturer: unknown, Type: similar to SSI Schaefer 14/7-2 l (for painted) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support rod Material: Sheet steel Load: Single: approx. 120kg Stack: 1.200kg Content: approx. 26L Weight: approx. 4kg Current inventory; approx. 70  ...

height: 820 mm work height max.: ca. 2250 mm weight: 2,6 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Membrane accumulators, accumulators INTEGRAL ACCUMULATOR GmbH D0,75-210 075-1315-053-611 Content 0,75 l permissible Operating pressure 210 bar permissible Operating temp. 80°C spare part e.g. for TRAUB TND300 ! used ! Dimensions: 185 x 122 x 122 mm

Storage containers SCHAEFER BOXES Warehouse Fix 1 720 x 480 x 300 mm made of sheet steel galvanized

length: 3 m weight max. in kg: max. 150 kg weight: ca. 9 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 1300 Battery Towing Tractor unused, only 1 working hour Electric powered, pedestrian controlled tow tractor for towing wheeled loads up to 1300 kg in weight Technical Details Drive Electric Tires Pneumatic Battery 24V/50Ah Service Weight 98 kg Service Brake Electric Motor 0,4 kW Drive Motor kW Driving Speed With / Without Load 4 / 4,5 km/h km/h Built-in Charger 24V5A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024.

numbers of pallets: 10 0: 40 kg Overall size: 120 x 120 x 150 mm weight of the machine ca.: 620 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Item: PU Storage tanks with filter boxes Quantity: 6 Material: Stainless steel Dimensions: 2300 mm (H) x 1800mm (D) Others: a. 1 hole DN 65 bottom for outlet chemical b. 1 set of 6 wire mesh filter boxes with dimension: 40cm W x 40cm L x 10cm H c.Tank cover ( movable) with handle and hinge d. 1 set of 4 legs to support for tank e. One 150mm hole on top for stirrer

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...

E+K Bunker Dosing and Storage Bunker Vibration Bunker Dosing and storage bunker: Dimensions: LxWxH = 760 x 400 x 125 mm Automatic controller: Type: PiCo A1-3/B.7 230 V Hz 50/60 Hz Drive: LSF 90 Linear Vibratory Actuator Length: 669mm Internal dimensions in kg max 7.00 kg min 3.00 kg Connection to control unit only 230 Volt Hz 50 A: 1.00 Total dimensions LxWxH = 1020 x 400 x 360 mm More items - new and used - can be found in our shop! International shipping costs on request!

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

length: 10 m width: 5 m height of eaves: 3 m The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us: More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

We supply and install our own, new, digital PLC controllers suitable for storage lifts and paternosters of all manufacturers on the market (e.g. Kardex, Hänel, Megamat, Electrolux Constructor, Zambelli, Intertex, Lista and many more). Our LTG StoreControl LL (storage lifts) and LTG StoreControl P-Touch (paternoster) control systems thus offer replacements for controls for which all spare parts are otherwise no longer available. With our controls, it is easy to connect your dynamic warehouse systems to higher-level warehouse management systems or to implement access restrictions.

Replacement control system for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" controllers, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit the storage systems of all manufacturers and types. The storage systems can remain fully loaded for the conversion. We can offer special solutions as well as software connections.

0: 10000 kg height of stroke: 130 mm Total height: 290 mm weight: 21 kg dimensions: 190 x 260 x 290 mm Hydraulic machine jack Foot height 22mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5000 kg height of stroke: 120 mm Total height: 243 mm weight: 15 kg dimensions: 170 x 230 x 250 m Hydraulic machine jack Foot height 19mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.