martin planlama makineleri kullanılmış satılık

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

Key data: 500 mm, 8 mm, 6 kW

Martin T54 Surface Planer, with Tersa Z-4 and Hydraulic Table Lift Brand: Martin Type: T54 Year of Make: 1997 M. No.: V240171 Motor power: 5.5 kW Knife shaft: 5,000 tpm Z-4 Tersa Solid Steel Shaft ø125 mm Planing width: 5 Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 855 mm Dressing fence: 45° tiltable with Dun planing bar and width adjustment on lineair guides Weight: 1,200 KG Option: SuvaMatic protection device Condition: Full-function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture 1987 M. Nr V 151674 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahn removal 8 mm foot pedal adjustment with display at table level Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 500 mm, 1640 mm, 4 St.

Martin T52 Surface Planer Brand Martin Type T52 Year of manufacture: 1986 M. No V144098 Motor power 5.5 kW (7.5 hp) Knife shaft speed 5000 rpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 500 mm Blade length 510 mm Spahnabnahme Praxis 16 mm foot pedal adjustment with display at table level, limited to 8 mm for safety. Table length 2840 mm Task - Table length 1640 mm Acceptance - table length 1200 mm Table height 800 mm Dressing tank 1,100165mm Stop tilt 45° Weight approx. 950 KG Condition: Function tested

Key data: 510 mm, 2850 mm, 4 St.

Martin T54 Surface Planer Brand: Martin Type: T54 Year of manufacture: 2018 M. No.: V555076 Control panel: Sliding control panel with stop, digital readout, electric planing thickness adjustment Motor power: 5.5 kW Knife shaft speed: 6,000 tpm (increased speed) Knife shaft: X-Plane ø125 mm Contactor: Suvamatic Planing width: 5000 mm Dressing stop: 45° tiltable with Dun planing bar Spahn removal: 8 mm Table length: 2,850 mm Task - table length: 1,640 mm Acceptance - table length: 1,200 mm Table height: 850 mm Weight: 1,400 KG

Key data: 510 mm, 2500 mm, 4 St.

Trainer: Martin Type T 51 Planing width 510 mm 4 Knife Shaft Strip Planer Knife Standard Slit table lips for quiet running Swivelling dressing stop Table lengths 1400 mm and 1100 mm Maximum chip depth: 16 mm Speed of the knife shaft approx. 5000 rpm. Motor power approx. 5 kW Weight approx. 900 kg Dimensions approx. 2600 mm x 700 mm x H 1000 mm

Key data: 510 mm, 2500 mm, 4 St.

Martin T51 Surface Planer – Classic from the 60s | 4-Knife Shaft | overhauled at handover For sale is a Martin T51 surface planer, a real German machine classic from the solid cast iron era of the 60s. These machines stand for extremely smooth running, precision and durability – exactly what many modern machines often no longer deliver. ⸻ Technical data & equipment: • Model: Martin T51 • Year of construction: approx. 1960s • 4-knife shaft • Solid cast design • Precise dressing tables with good flatness ⸻ Condition: • Machine has been tested • Technically fully functional • Signs of wear due to age (purely visual) New knives are used at handover → ready for immediate use Approx. 1200 KG - Forklift available for loading.

Excellent condition - Fully operational - Loading / Transport possible! length of surfacing-table 1,600 mm planing width 500 mm Angle Limit Stop 1100 x 170 mm

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

Key data: 630 mm, 280 mm, 8 kW

Martin T44 Thickness Planer Brand Martin Type T44 M-No.: V 257340 Year of Make: 1999 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Tersa Circle ø125 mm Planing width 630 mm Planing thickness 2.8 - 280 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 2 speeds 6 / 12 m/min, Weight 1,500 KG

Key data: 630 mm, 2 mm, 7 kW

Technical data/equipment: Planing width 630 mm Planing height 2-250 mm Speed 5000 rpm Motor power 7.5 kW Connection: 400 V, 50 Hz, 3~ Rated current 19.0 A Suction nozzle Ø 160 mm Weight approx. 1050 kg electr. Thickness table adjustment Thickness table guided on 4 spindles

Key data: 630 mm, 250 mm, 5 kW

Thickness planer Martin Type T43 Year of manufacture 1987 Planing width 630 mm Planing height 2 - 250 mm Cutting depth maximum 8 mm Electric height adjustment with digital display, counter Height adjustment with fast and creep gear Motor power main motor 5.5 kW, decelerated Feed speed 6-9-12-18 m/min. Rubberized feed rollers in the inlet and outfeed 2 Knife Shaft Strip Planer Knife Length of the thickness table 1100 mm Thickness table guided on 4 supporting spindles Central lubrication Extraction connection diameter 160 mm Dimensions 1200 mm x 1120 mm x H 1200 Weight approx. 1100 kg

Key data: 630 mm, 250 mm, 5 kW

Thickness planing machine Planing machine Thickener MARTIN TYPE: T41 Planing width approx. 630 mm Passage approx. 250 mm 4 knives planing shaft wedge bar shaft safety knife shaft infinitely adjustable feed speed 8-20 m/min. Articulated pressure beams Rubber feed and rubber pull-out roller Extraction connection: 140 mm Dimensions: 1000 x 1100x 1200mm Soft start control Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are a guideline, depending on the distance and unloading option they may vary. The items can be picked up by yourself or shipped at the expense of the buyer. The item offered is offered with differential taxation. The sales price shown is the g ...

Key data: 630 mm

THICKNESS PLANER model MARTIN T 44 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum working height mm. 250 maximum removal mm. 8 n.2 feed speed mt./min. 6 / 12 motorized table positioning with digital reading n.4 knives "Tersa" main motor power Hp 7,5 net weight kg. 1115 volt. 380/50

CIRCULAR SAW MARTIN T73 AUTOMATIC 3 CNC controlled axes CE regulation: YES volt. 380/50 n.3 AXES CONTROLLED by CNC 1. blade height 2. blades inclination 3. parallel guide Equipment: parallelogram cross carriage T 7335 adjustment gauge T 7339 n.02 digital lingitudinal stops T 7341 3-axis scoring unit electrically adjustable T 7323 squaring device "Besaumfix" T 7372 second support T 7368 Technical data : length of carriage mm. 3700 cutting width mm. 1350 with 3-axis electric engraver Cutting height max 170 Blades inclination: 0 ° - 46 ° main engine power Hp 7.5 (Kw 5.5) Blade max diameter 500 mm 3-speed motor. rpm. 2800/4000/5500 Weight 2000 kg

MARTIN T92 automatic roll forming machine with CNC control and 6 frequency-controlled hobic axes Program memory, tool memory, collision protection, diagnostic function, etc. Brand: MARTIN Type: T92 Standardization: CE Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 260 mm (with pendulum axle preparation) Planer thickness: 5 - 180 mm Roll forming depth: max: 40 mm (with suitable tool) Min. product length: 380 mm Operation: CNC control with LCD user interface, for spindle positioning, feed, machining programs, tool data, diagnostics, etc. Storage option of up to 200 profiles and planer dimensions incl. the associated Tool information including all axes of the machine; Storage option for 200 tools incl. reference data; Integrated operating hours counter with total and batch running time;  ...

Brand: MARTIN Type: T90 with 7 spindles Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 22 - 240 mm (260 possible with ingekammerte planing heads) Planer thickness: 5 - 170 mm 1. Planer shaft dresser: Spahn removal max. 10 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 2&3. Spindle: Vertical callibrier planing and contour shafts, Spahn removal max. 10 mm, clamping length 160 mm, flight circle min. ø100 max ø125 mm, Z-4, 6.000 rpm, 7.5 KW 4. Thickness shaft/upper shaft: horizontal spindle tap removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 mm - max ø125 mm, Z-4, 6.000rpm, 7.5 KW 5. Top spindle 2nd profile shaft horizontal, Spahn removal: max. 8.5 mm, clamping length 240 mm, flight circle min. ø100 - max ø180 mm, 6.000 rpm, 7.5 KW, adju ...

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Equipment: - Scoring saw unit - Miter stop - Trimming length 3300 mm - Cutting width 1100 mm, can be moved by hand, with digital display - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrical: 380 V, 50 Hz, 3~, 13.0 A

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

We constantly overhaul Martin T90, T90 profile and Martin T92 If you have any questions, please call us or email us. We speak Dutch, German, English and French. Brand: MARTIN Type: T90 Year of construction: 1991 M-No.: V188134 Feed table: 2000 mm Table height adjustment: Max. Spahnabname 10 mm Stop bar: Manual adjustment 10 mm Planer width: 12 - 260 mm Planer thickness: 8 - 160 mm Roll forming depth: Vertical spindle max. 12 mm Horizontal spindle max. 8.5 mm Thickness adjustment: NC and electrical adjustment Width adjustment: NC and electrical adjustment (optional: automatic pendulum axle control) Head measurement: 100 programs memory Spindles: Bottom: Tersa Z-4, ø125 mm, 5.5 KW Right & Left: Tersa Z-4, ø125 mm, 7.5 KW Top: Tersa Z-4 ø125 mm, 5.5 KW Speed: 6,000 rpm Feed: 4 – 25 m/min infinitely variable Min. product length: 380 mm Central control ...

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Key data: 45 , 33000 , 1250

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

Key data: 3 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Key data: 1 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Key data: 3 mm, 8 kW, 30 mm

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Key data: 3 mm, 6 kW, 30 mm

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Key data: 3 mm, 10 kW, 3 mm

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

Key data: 46 °, 3 mm, 1 mm

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic:  ...

Key data: 46 °, 3 mm, 850 mm

Martin T60C Sliding Table Saw Brand Martin Type T60C M-No.: V482223 Year of Make: 2008 Control panel: touchscreen integrated at eye level in the extraction support 2-axis control (saw height, inclination, cutting width with handwheel adjustment but with digital readout of the cutting length in the screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivel: 0° - 45° Speed control: 4,000/4,800/6,000/tpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 850 mm, handwheel adjustment with readout in the screen and +/- 0.05 mm accuracy Table: galvanized steel with fixed-angle stops 0º, 22,5º, 30ºen 45º. Dimensions: 1,340650mm Length stop: 2,200 - 3,300 mm with analogue readout, folding latch with magnifying glass Suction: Top: ø100 mm, Bottom: ø120 mm Weight: 1,400 KG

SPECIFICATIONS: Table size: 2400 x 900 mm Extendable table 1 4-roller drive (with variator) Installed power: 5 kW Lockers Ø 35 mm Motorized spindle tilt +/- 45° Motorized height adjustment Dornfix clamping system

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...

Key data: 45 °, 3300 mm, 1250 mm

MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...

Key data: 45 °, 3300 mm, 1350 mm

.

Key data: 92 °, 3300 mm, 1350 mm

.

Key data: 90 °, 3000 mm

SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°

MARTIN Swivel milling machine, type T 23, built in 1978, swivel range: -5 to 45°, spindle diameter 30mm, speeds: 4, height adjustment: handwheel, motor: 6 kW, table dimensions 1,100 x 940 mm, swivel adjustment handwheel

This Martin T72 table saw was manufactured in 1989. Ideal for woodworking, it offers reliable performance for precision cutting. Consider the opportunity to buy this Martin T72 table saw. Contact us for more information.

Table dimensions: 2.400 mm Motor output: 5/6 kW Spindle diameter: 30/40 mm reus: 3000/4500/6000/9000 U/min Weight: ca. 1.500 kg : Elektrisch : Elektrisch : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 45 °, 3000 mm, 1100 mm

MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg

Excellent condition - Fully operational - Loading / Transport possible! Motor rating: 5 / 6 kW Rotational speeds: 3/4/5/ 6/ 8/ 10,000 rpm Spindle stroke : 150 mm The machine has the following optional accessories Digital display in the controller of the infeed fence jaw position Motorized fence positioning via the machine's electronic system Motorized table opening for tools with diameters from 70 mm up to 250 mm Motorized feed support Table extension ( 2400mm) with extensible workpiece support length 3000 mm, 700 mm extendable to the front Integral fence jaws swinging support for fence. The fence will be lifted via handwheel from the table Wegoma feeder Variomatic 4N, 4 rolls - feed speed 0,5 - 24 m/min

Excellent condition - Fully operational - Loading / Transport possible! Nominal current 22 A Voltage 400 V Frequency 50 Hz min. Saw blade diameter 250 mm max. saw blade diameter 400 mme Rotation speed 4000, 4800 and 6000 rpm main motor 4 kW cutting length 3,200 mm Cutting Widt 850 mm Swival Range +/- 0 - 46 °

Sawblade tiltable: 45 ° Length of the rolling table: 3.300 mm cutting width: 1.200 mm Motor output: 5,5 kW Cutting height: ca. 170 mm Saw blade diameter: 500 mm Speed: 2800/4000/5500 U/min. weight of the machine ca.: 1.500 kg : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle tilting: yes -5 bis 45°; height adjustment: electric; tilting adjustment: electric; fence adjustment: manuell; read out spindle height: digital; read out tilting: digital; read out fence: digital; spindle diameter: 30 mm; speed: 3000, 4500, 6000, 9000; power consuption: 5 / 6 kW; motor brake: Ja, automatisch; suction connection: 2 x 120mm; machine length: 2500mm; machine width: 1400mm; weight: 1100kg;

spindle tilting: yes 0 - 45°; height adjustment: manual; tilting adjustment: manual; fence adjustment: manual; read out height : -; read out tilting: Scala; read out fence: Scala; sawblade diameter: 30 mm; speeds: 3000, 4500, 6000, 9000; motor power: 5 kW; motor brake: yes, feed brake; suction connection: 2 x 100mm; machine length: 1200mm; machine depth: 1400mm; weight: 800kg; schwere Produktionsfräsmaschine

working width: 630 mm; working height: 220 mm; cutter head: strip knife; number of blades: 4; height adjustment: manual; read out workpiece thickness: Scala; feed speed: variabel ; infeed roller: rubber; outfeed roller: rubber; table roller: no; motor power: 5,5 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 1000kg;

working width: 510 mm; cutter head: strip knive; number of blades: 2; surface table length: 2600 mm; adjustment table: hydraulic; Hollow and pointed joints adjustment: ja; read out table hight: Scala; read out Hollow and pointed joints: Scala; fence tilting: yes; motor power: 5,5 kW; motor brake: yes, automatic; machine length: 2600 mm; machine width: 1000mm; weight: 1050 kg;

Robust swivel milling machine T 26 swivel from -45 to +45 degrees Swivel milling machine in very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L Barrel Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed in the upper display, which is then adjusted at the stop, so that adjustments can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel fix quick-change spindle with torque wrench T226 comfort stop with digital displays for overall adjustment and infeed jaw individually, as well as input of the cutter diameter, whereby the cutting depth is automatically calculated Stop with lifting device can be swivelled away (for s ...

Key data: 46 °, 3000 mm, 1100 mm

MARTIN T73 Automatic Year 2002 Main sawing unit: 5.5 kW Rated current: 15 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 - 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Parallel fence can be lowered manually + suction arm can be moved max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor Top control panel Central lubrication Fixed degree setting on the transverse table (grid) Pull-out support on the transverse table Compressed air supply required Extraction connection: 120 + 100 mm Weight: approx. 1950 kg

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

surface planer , thickness planer , spindle moulder . machines SCM L'Invincibile second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 l'Invincibile : useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 surface planer model SCM F52 l'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 l’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12