mak gemi motorları kullanılmış satılık

6 piston KS obsolete piston crown, in Exchange or new

1 piston overtakes MAHLE

RECON Part number: 2.3597-BB ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Cooling water pump overhauled Alweiler NSG 65

Basket valve in Exchange

Liner without APR - almost new

RECON pn. 1.20.7-32.1201-07 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Overtaken KOLBENSCHMIDT piston crowns

Key data: 840 , 900

FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Starter air Ingerssol overtaken edge

FOR SALE STANDARD SIZE MEASURMENT CRANKSHAFT OF MAK 6M 332AK TO WHOM AT MAY CONCERN; THE CRANKSHAFT HAD BEEN PUT ON V BLOCK AND FOLLOWING TESTS HAD BEEN CARRIED OUT. -Main and crankpin journals measurements had been carried out. -MPI test had been carried out and no. crack had been observed. Crankshaft were found typical. -Run-out measurement had been carried out found in good order. -Hardness test had been carried out to all crankpins and main bearing journal. All values had been found in permissible limits. -Crankshaft had been polished. CRANK SHAFT READY TO TRANSPORT AT IZMIR - TURKEY. WITH FULL SEVICE REPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 .aliagamarine.com TURKEY ...

TO WHOM IT MAY CONCERN ; WE VE 2 SET COMPLETE MAK 6M 331 AK ENGINES ON STOCK ENGINES ARE IN GOOD RUNNING CONDATION. BOTH ARE READY TO LOAD ON TRUCK PLS FIND ENGINE SPEC AT BELOW.. MAK 6M 331AK POWER 800HP 600RPM YOB 1976 SERIAL NO 33045 / 33046 IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

MAK M20 Spares for sale. 1.Reusable Cyl Heads Bare-Pressure Tested Free From Crack:8-10 2.Piston With Groove With in Limit:8-10 3.Con Rod-Free From Crack, Wear Within Limit:8-10 4.Fuel Pump-Good Condition:8-10 5.Reusable Liners Wear Below 0.20mm-Free From Crack, Welding or any Damages:8-10 6.L O Filter-Good Condition:2 7.Water Pump-Good Condition:1 8.Lube oil Pump-Good Condition:1 9.Turbo Charger K54-Good Condition:2 10.STD Condition 6M20 Crankshaft, Within Std Limits, no Crack, no Ovality , Hardness Within Limits:1 11.Cam Shaft 6M20-Good Condition:2 12.Woodward UG-8 - Good Condition:2 13.6M20 Engine Block-Good Condition:1 14.Cam Shaft Gear & Crankshaft Gear-Good Condition:2 15.FLY Wheel-Good Condition 6M20:1 16.After Cooler-Good Condition 6M20:1

Piston diesel operation - almost new

Mak 6M20 Block Very Good Condition for sale

Mak 6M20 Liner Very Good Condition for sale

Mak 6M20 Piston Very Good Condition for sale

DEAR'S SALE, MAK 552AK FULL COVER, GOOD CONDITION Brgds Hakan KUSCU +905323642509 info@kscege

DEAR'S SALE, MAK 8M601 SPARE PARTS 8CYL STD CRANKSAFT, LINER, PISTON, CONROD, FULL COVER ANY SPARE PARTS Brgds Hakan KUSCU +905323642509 info@kscege

RECON Part number: 9.1110-007 - with old GL stamping - Price depending on measurement between 800€ and 1400€ ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON - with cooled exhaust seat rings - heavy fuel ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON - with uncooled seat rings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

DEAR'S SALE, MAK 453AK SPARE PARTS 9CYL STD CRANKSAFT, LINER, FULL COVER, L/O PUMP, PISTON ANY PARTS Brgds Hakan KUSCU info@kscege.com

FOR SALE 2 SET MAK 6M 332AK ENGINES HAVE A GOOD DAY SIR. WE VE 2 SETS COMPLETE MAK 6M 332AK ENGINES ON STOCK NOW. ENGINES ARE IN GOOD RUNNING CONDATION. BOTH ARE READY TO LOAD ON TRUCK. PLS FIND ENGINE SPEC AT BELOW... PRESENT CRANKSHAFT ARE STD SIZE MEASURMENT. TURBO CHARGERS ARE BBC RR-212 6 H MAK 6M 332 AK POWER 960kW RPM 720RPM YOB 1981 SERIAL NO.. 33352/33353 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E-mail: info aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Now available: MaK M25 6 cylinder engine block in stock and ready to be sold. Ask us for more information and prices.

DEAR'S SALE, COMPLETE Mak 6M331 engine & reduction gear Reinjest WAV1400 type Ratio 2.5/1 Std cranksaft good condition Brgds Hakan KUSCU +905323642509

Dear's Sale, used 1 complete engine Mak 6M552AK Also, cover, piston, liner, conrod new/used, fuel pump, 6cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Recon Part number: 3.2107 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

MAK 6M20 crankshaft Condition: Refurbished Part number: 1.13.7-25.1001-01 and 1.13.7-25.1000-11 - all base pins are standard size (180mm) - all connecting cones are 1st stage undersize ground (151,50mm) - incl. gear and counterweights - incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We are happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

MAK 8M552AK Crankshaft for Sale MARKING 1.74 .6 -25.10.01-50B 101373 221361 CK 45/50 DB 7295 DB LLOYDS DSF 601 966 15.10.76 7295 LLOYDS 62300 D 10 GTL .76 7295 A B ES 73826 10.76

Very Good Condition MAK 552 Spares 1.CON ROD-8 2.CYLINDER HEAD-8 3.FUEL PUMP-8 4.ROCKER ARM ASSEMBLY-8 5.CRANKSHAFT-1

We have 2pcs MAK 6M20 standard Crankshafts in our stock available for Sale. MARKING 1) 34072 221 6916 34crNi Mo6v 86026 GL 1517 LLOYDS BER500241 51981B 653009 2) 24072 221 6915 34crNi Mo6v 86026 GL 1513 LLOYDS BER500585 51981B 653007

Mak 6M20 Cylinder Head Very Good Condition for sale.

We have Mak M20 Cylinder Heads for sale in our Stock Ex-Works. CONDITION: Old, Used in Good Condition with Pressure Tested

Valve bridge inlet MAK M43 and M43C recon MAK Part Number: 433515-200

Recon 67/15/20/6-ESV-S99-20K192 15.5l 6bar tube 2.5bar shell ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Valve hood complete MAK M43C MAK Part Number: 432190 BB 432190-051

Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

MAK 8M32 Crankshaft for sale Used Standart size In our stock in Istanbul Turkey Please contact: info@fin-marine

Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

MaK 6M552C CRANKSHAFT , STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

Recon ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

2 pcs piston MAK M43C recon Piston crown new with LR test certificate. Piston shirt crack-tested approx. 35,000 operating hours. MAK Part Number: 432670-400

Connecting rod without connecting rod head MAK M43C Recon Crack tested using Magnaflux process. Testing for parallelism of the connecting rod bearing holder and the connecting rod head revealed a deviation of less than 0.01 mm. Connecting rod bearing holder in the brushed state 0.01 mm. Connecting rod is sold as shown. MAK Part Number: 432810-100

MAK 8M25 Crankshaft 2 pieces available in stock Standart sized Measurement report is available Tested for cracks, hardness and oscillation For further information please contact us at info@fin-marine

Recon Part Number: 2.3120-AA Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

MaK M25 pistons 16 pieces available KS type standard piston ring grooves in good condition Please contact info@fin-marine for more information

MaK M25 Cylinder Liners 16 pieces available in our stock in Istanbul Turkey Max wear 0.15 mm Honing lines visible in good condition please contact: infofina-marine for more info

MaK M25 connecting rods 16 Pieces available in our stock in Istanbul Tested for cracks measurements within limits In good condition Please contact infofin-marine for more information

RECON rocker arms complete with rocker arms MAK M43C MAK Part Numbers: 433530-100, 433510-100, 433520-100

RECON valve bridge inlet and outlet MAK M43B and M43C MAK Part Number Inlet: 433515-100 MAK Part Number Outlet: 433515-200

MAK 32C cylinder heads In brand new condition 18 Pcs available With BV class certificate In our stock in Istanbul Turkey

3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey

Hello all We have in our stock in Istanbul turkey 16 Pieces brand new Mak M25C cylinder heads In brand new condition. We also have pistons, cylinder liners, connecting rods, Crankshafts for 8M25 engine and more spares available for Mak 8M25 Please contact us at info@fin-marine

Mak 6M20 engine 2 units available Available from out stock Year: 2004 1020 Kw at 1000 RPM

SUB: FOR SALE... MAK 8M 282AK . USED CRANKSHAFT AT TURKEY HAVE A GDY SIR WE VE 1 PC USED MAK 8M 332AK CRANKSHAFT AT OUR STOCK AT TURKEY.. CRANSHAFT MEASURMENTS IN STANDART SIZE LIMITIS CRANKSHAFT CLASS STAMP ON ATTACHED PICTURE. CRANKSHAFTS ARE READY TO INSPECTION AT WORK SHOP IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Recon Type K-NU5/1601941 1941 1/min 717 l/min 10 bar Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Make: Mak Model: 8M25C 8 cylinders n line IMO II Built year: 2014 Condition: New / Unused Output: Rated 2,666 kW at 750 rpm 2 Counter Clockwise rotation 2 Clockwise rotation Compressed air starting suitable for operation with MDO max. viscosity: 11 cST/40 C Fuel consumption: 187 g/kWH at 100% rated output 184 g/kWH at 85% rated output Quantity: 4 With ABS class certificate. Contact us at infoheeyas.co.uk #mak #engine #new #ship #vessel #boat #shipengine # caterpillar #makengine #power #energy #propulsion #sailing

MaK 8M453C crankshaft Std sized Without cracks or weldings With reports available

MAK 8M32C Engine Block In Reusable condition

6 cylinder covers MAK M20 The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - On (20°) and exhaust valve seat rings (30°). - Inlet and exhaust valves. - Swivel devices. Nozzle sleeves were used with new sealing rings. Cylinder cover tested with 10bar water pressure. Round seals valve guide renewed. The sealing surface has been tested, is fine. Packed in wooden boxes. Price per piece

RECON Part Number: 1.60.6-26.60.01-06 Kolbenschmidt 1. Ring groove: 0.75mm ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon Catalog number: 1.2510 (1.64.6-25.10.01-04A) Sanded to 1 level undersize ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

mak 601 cylinder head 4 Pcs available Std sized exh seat bores without any cracks or welding from our stock in Istanbul

Mak 552C Cylinder head 5 pcs available Free of cracks and welding Std sized exh seat bores From our Istanbul stock

mak 601 piston Mahle std sized piston ring grooves 3 pcs available + 2 piston crowns available free of any cracks or welding from our istanbul stock

Mak M32 Connecting rods Free of cracks and ovality With good measurements 7 pcs available

Key data: 2000 KW, 750 1/min

Make: MaK Four-stroke marine main diesel engine, to drive a propeller (2 CPP-rudder propeller) Model: 6M25C Built year: 2015 Condition: New / Unused Rated Output: 2000 kW at 750 rpm Design: 6 cylinders in line, IMO II 2 counter-clockwise rotation non-reversible. Compressed - air starting suitable for operation with gas oil max viscosity: 7 cST/40 c

Vessel reverser in Exchange

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Outdated MAN E2876LE302 bio gas engine in Exchange.

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

Various air-, oil- and fuel-filters, starter engines and alternators to be sold as package after inspection and price negotiations. Please arrange appointment with Mr Kottowski

SOLD! ABC ENGINE 8XDXC 886KW @ 750 RPM diesel engine ABS BJ 2002

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...