CNC frezeleme ve gravür makinesi CNC-STEP High-Z S-720/T

Specifications / Technical Data S-720/T

CNC-Fraesmaschine und Graviermaschine / Fraese



With the T-variant of the High-Z CNC Fraes.-and engraving machine you acquire old-fashioned technology with the certain i-Tpuelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds.



The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved.



This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingesses up to approx. 7000mm/min.




Here you can watch a video of empty journeys with the new High-Z/T.



This series of mechanical engineering is just as applicable in the industrial sector for work such as engraving, framing, drilling, measuring, cutting, as well as for dosing systems to apply adhesive sizing, etc. on 3D contours,





coloured energy chains on all axes. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller.









basic equipment of all high-Z CNC fraesmachines:



software ConstruCAM-3D, (from S-720 or S-400/T ) including



no-use reference switches and NOTAUS buttons as well as 22mm thick linear guides and individually adapted spindle nuts.



--------------------------------------------------------- -----------------------






equipment / Product data:



oDrive: 4 powerful brand stepper motors from Nanotec with 1600 steps/ revolution (control 1/8 step)

o2 motors ! for consistent pull and pressure forces when framing on the X-axis (no stoering belt)

o pushing through long materials possible, since no belt drive is in the way at the end of the X axis !

o Z-axis 16mm, all ground and 61hrc top-flit-in

o-two-sided ball-bearing ball-bearing spindles on X and Y axles

otravel speed max. 7000 mm/min

oTechnical resolution 0.00625 mm ( 1/8 step )

oreverse play maximum approx. +/- 10 microns ( 0.01mm )

o clamping area 1050 x 520 mm

oTravel distances: X=720 mm; Y=400 mm; Z= 110 mm

oContactless reed sensors / reference switches / limit switches on all axes

oDouble secured emergency


oEnergy chains for clean cable guide

oTotal mass with motors : L x W x H=ca.1070 x 690 x 500mm

oFraesmotor holder Euroneck 43mm

the ce-compliant commissioning of our CNC machines requires the installation of the protective enclosure and the suction nozzle.

seller offer No. resale 67805432