WK Systemtechnik ILS 600 Sprey sistemi

2019 WK Systemtechnik ILS 600 – HTL –

Ionline Lubrication System

Dickschickt preservation system. The oil is applied via nozzles

The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly.

By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered.

The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution.

General data

Dimensions (WxHxD)

without conveyor units

2486mmx2080mmx2722mm

Dimensions with open doors 3265mmx3510mmx2722mm

Weight approx. 2500 KG

Electrical connection

Supply voltage 400 Volt / 50 Hz

Power 15kVA

Fuse protection 35 A

Control voltage 24 V

Air connection

Air connection 1⁄2’ screw connection

Compressed air supply 6 bar

Air quality Oil and water-free

Preservative oil properties

Flash point

Liquid media with a flash point

flash point >56°C

use

Viscosity at 20°C 1 - 200mm2/s (cst)

Density >0.7 Kg/dm3

Consumption data

Preservative medium Spray air Consumption @

0.5 bar

Spray chamber Max. 2.5 l/h 600 l/min

Spray system components

Normal accessories are:

Operating instructions ILS 600

Circuit diagram ILS 600

Media circuit plan ILS 600

Data USB stick

Components of the ILS 600: 15

Tight stainless steel collecting tray with stainless steel welded frame

Conservation range

Inlet lock

Spray chamber

Outlet lock

Intermediate container

Analogue level measurement

Compressed air diaphragm pump for filling

Suction lance with level switch

Separators 1 & 2

4 x Activated Carbon Filters

4 x Aerosolfilter

Koaleszer-Filter cassette

Level sensors min / max.

Side channel blower K04 with silencer

Spray chamber

Four-sided nozzle units with external preservation nozzles

Nozzle shutdown

Thermally monitored media supply

Sensor-monitored conveyor belt for chamber flow

Compressed air diaphragm pump for filling the oil containers

Pneumatic unit

Maintenance device combination

Mounting plate oil medium 1 & 2

preparation pump

Geared stepper motor

Flow transmitter

High pressure filter

Leak sensor

Feed conveyor belt with motor and sensor monitoring

Inlet side cross conveyor belt with lifting unit

Outlet-side cross conveyor belt with lifting unit

Removal conveyor belt with motor, sensor monitoring and oil collecting tray

Find more re - .ucymachines/

Contact us at - sales@ucymachines