Doğrulanmış bayi
Ayrıntıları görüntüle
Weinig Unimat Super4
Doğrulanmış satıcı
Fiyat iste
Doğrudan satıcıya
1 / 1
Teknik veriler
· ID 170389260İkinci el makineler
- Üretim yılı
- 2003
- Konum
- D - Nordrhein-Westfalen
Identifikation
ÜreticiWeinig
ModelUnimat Super4
Kalem numarası3318064
Technik
Adet1
Açıklama
Technical data:
- Manufacturer: Weinig
- Type: Unimat Super 4
- Year of manufacture: 2003
- Working width: 25
- 150 mm
- Working height: 15
- 50 mm
- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4
- Spindle 1: 11 KW
- Spindle 2: 18.5 KW
- Spindle 3: 5.5 KW
- Feed engine: 2.2 KW
- Feedspeed: 5
-20 m/min.
- Speed spindle 1 and 3: 6.000 rpm.
- Speed spindle 2: 7.000 rpm.
- Transport rollers D (hardened): 140 mm
- Length of infeed table: 2.000 mm
- Hardened machine tables
- Guide groove in machine table
- Suction nozzles 2x140 mm, 1x160 mm
- Volume flow: approx. 5,500 m³/h
- Volts/Hz: 400/50
- Location: Blomberg warehouse from 01/2026
- Manufacturer: Weinig
- Type: Unimat Super 4
- Year of manufacture: 2003
- Working width: 25
- 150 mm
- Working height: 15
- 50 mm
- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4
- Spindle 1: 11 KW
- Spindle 2: 18.5 KW
- Spindle 3: 5.5 KW
- Feed engine: 2.2 KW
- Feedspeed: 5
-20 m/min.
- Speed spindle 1 and 3: 6.000 rpm.
- Speed spindle 2: 7.000 rpm.
- Transport rollers D (hardened): 140 mm
- Length of infeed table: 2.000 mm
- Hardened machine tables
- Guide groove in machine table
- Suction nozzles 2x140 mm, 1x160 mm
- Volume flow: approx. 5,500 m³/h
- Volts/Hz: 400/50
- Location: Blomberg warehouse from 01/2026
Bu makine hakkında bilgi isteyin
Talebiniz doğrudan bu makinenin satıcısına iletilir.
