SCHULER GRÄBENER GMO 2-315-2000-160 Mekanik presler

CONTROLS
  PLC SIEMENS S7
PRESS DESIGN
  drive system: knuckle-joint
  frame design: H-frame, monoblock
  openings in uprights: yes
  number of suspensions: 2
  feedstock transport direction: left to right
PRESS FORCES
  total force (nominal): 315 to
  nominal work capacity: 38 kNm
PRESS TABLE
  table surface (left-right): 2000 mm
  table surface (front-back): 1200 mm
  thickness of bolster plate: 200 mm
SLIDE
  slide force: 315 to
  table surface (left-right): 1995 mm
  table surface (front-back): 1100 mm
  stroke: 160 mm
  stroke rate (max.): 80 /min
SLIDE (MECHAN. PRESS)
  slide adjustment: 140 mm
  stroke rate (min.): 20 /min
  stroke rate (max.): 80 /min
  main drive power: 90 kW
TOOL ASSEMBLY DIMENSIONS
  shut height (stroke down, adjustment up), BDC: 555 mm
  distance between columns (H-frame): 2060 mm
  passline opening (free passage in side columns): 1060 mm
OVERALL SPECIFICATIONS (COIL LINES)
  sheet width max.: 400 mm
  sheet thickness max.: 5 mm
COIL CHAIR
  coil weight max.: 4 to
DECOILER
  design: single reel, traversable
  sheet width max.: 400 mm
  sheet width (min): 30 mm
  coil weight max.: 4 to
  max. diameter of coil: 1500 mm
  mandrel expansion range from: 460 mm
  mandrel expansion range up to: 530 mm
  movement: 1500 mm
LEVELLER UNIT
  sheet width max.: 400 mm
  sheet width (min): 50 mm
  material cross section max. (450 N/mm2): 1000 mm²
  number of leveller rolls: 9
  diameter of leveller rolls: 50 mm
  number of infeed-/outfeed rolls: 150
  feed velocity min.: 5 m/min
  feed velocity max.: 50 m/min
STRIP-FEEDER
  feeder type: roll feeder
  sheet width max.: 400 mm
  sheet thickness max.: 5 mm
ELECTRICAL SPECIFICATIONS
  mains voltage: 400 V
  mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
  total height: 5840 mm
  height above floor level: 5000 mm
  height under floor level: 840 mm
  total weight approx.: 45000 kg
ATTACHMENTS (PRESSES)
  decoiler: yes
  leveller unit: yes
  strip feeder: yes
Knucke Joint press for slow movement when approaching BDC
Coil Reel KOHLER 4000.1
Straightener KOHLER KRM 50.400/9
KOHLER Loop control BÜ5
Roll feed KOHLER WVE 120/400
HIESSL belt lubrication (wide spray)
UNIDOR control system
Tool loading consoles