Ayrıntıları görüntüle
DMG MORI CLX 550 V4 Cnc tornalama makineleri
ikinci elDoğrulanmış satıcı
Fiyat iste
Doğrudan satıcıya
1 / 7
Teknik veriler
· ID 170453668Cnc tornalama makineleri
- Durum
- ikinci el
- Üretim yılı
- 2020
- Konum
- Nordrhein-Westfalen
Identifikation
ÜreticiDMG MORI
ModelCLX 550 V4
Kalem numarası1039-9530
Technik
Adet1
Açıklama
turning diameter: 480 mm
turning length: 1.225 mm
control: SLIMline Operate Siemens
greates pass round over bed: 700 mm
Swing dia. over traverse guideway: 370 mm
Main spindle::
Max. rpm: 3.250 min/-1
power capacity - main spindel: 33 / 22 kW
max. Torque: 630 / 420 Nm
spindle diameter in front bearing: 150 mm
max. bar capacity: 102 mm
chucking diameter: 315 mm
spindle nose: A2-8
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40
driven statition: 12 pos
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity - driven tool-stations: 5,44 kW
max. Torque: 20 Nm
number of toolpositions: 6 pos.
tool taper: BT
Tailstock::
tailstock travel: 1.200 mm
taper of center: MK 5
tension force: 12 kN
axis stroke::
x-axis: 307,5 mm
y-axis: +/- 60 mm
z-axis: 1.240 mm
feeds::
rapid traverse: X: 30 m/min
rapid traverse: Y: 22,5 m/min
rapid traverse: Z: 30 m/min
total power requirement: 60 kVA
weight of the machine ca.: 7,2 t
dimensions of the machine ca.: 5,5 x 3,5 x 2,1 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 12 bar
elektr. hand wheel:
Y-axis:
C-axis:
Oil Dust Skimmer: 1.100 m³/h
Signal lamp - 4 colour:
direkt probing: X, Y Achse
div. tool holder:
div. Chuck Jaws:
hollow chuck unit:
Tailstock: hydr.
Interface steady-rest:
steady rest: SMW - SLU-X3.1 | 20 - 165 mm
Three Jaw Chuck: SMW - BB-D315
CNC - Turning- and Millingcenter
DMG MORI - CLX 550 V4
- from a business closure
- extensive accessory package
- fully equipped
- only approx. 895 spindle hours
- only approx. 4,901 power-on hours
- chip removal package
- Alternating Speed technology cycle
- extensive accessory package
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1.225 mm
control: SLIMline Operate Siemens
greates pass round over bed: 700 mm
Swing dia. over traverse guideway: 370 mm
Main spindle::
Max. rpm: 3.250 min/-1
power capacity - main spindel: 33 / 22 kW
max. Torque: 630 / 420 Nm
spindle diameter in front bearing: 150 mm
max. bar capacity: 102 mm
chucking diameter: 315 mm
spindle nose: A2-8
turret::
number of toolpositions: 12 pos.
tool taper: VDI 40
driven statition: 12 pos
Spindle speed - driven tool stations: max. 4.000 min -1
power capacity - driven tool-stations: 5,44 kW
max. Torque: 20 Nm
number of toolpositions: 6 pos.
tool taper: BT
Tailstock::
tailstock travel: 1.200 mm
taper of center: MK 5
tension force: 12 kN
axis stroke::
x-axis: 307,5 mm
y-axis: +/- 60 mm
z-axis: 1.240 mm
feeds::
rapid traverse: X: 30 m/min
rapid traverse: Y: 22,5 m/min
rapid traverse: Z: 30 m/min
total power requirement: 60 kVA
weight of the machine ca.: 7,2 t
dimensions of the machine ca.: 5,5 x 3,5 x 2,1 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 12 bar
elektr. hand wheel:
Y-axis:
C-axis:
Oil Dust Skimmer: 1.100 m³/h
Signal lamp - 4 colour:
direkt probing: X, Y Achse
div. tool holder:
div. Chuck Jaws:
hollow chuck unit:
Tailstock: hydr.
Interface steady-rest:
steady rest: SMW - SLU-X3.1 | 20 - 165 mm
Three Jaw Chuck: SMW - BB-D315
CNC - Turning- and Millingcenter
DMG MORI - CLX 550 V4
- from a business closure
- extensive accessory package
- fully equipped
- only approx. 895 spindle hours
- only approx. 4,901 power-on hours
- chip removal package
- Alternating Speed technology cycle
- extensive accessory package
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bu makine hakkında bilgi isteyin
Talebiniz doğrudan bu makinenin satıcısına iletilir.
